Video Transcript for Review of Attwood Boat Bumpers - Fender Hangers - AT54RR

Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the Attwood Zig-Zag Fender Hangers with the fender line. Now don't let any oddly-shaped bow rails stop you from hanging your fenders where you need them. These flexible hangers right here are gonna conform to different rail shapes, including square pontoon rails, so you can get a nice secure hold that won't slip, slide, or rotate out of place even when the water gets choppy. The way these will attach, you can see on the very back, here's a little latch here.

If you release that latch, that'll allow you to adjust the strap to what size or style of bow rail you have. Once you tighten that down around the bow rail, just push this lever right back in, and that'll hold it snug and secure. Also, you can forget tying fenders with any tricky cleat hitches or fumbling with knots. Right here, this is zigzag cleat here. This is gonna let you slide your line through and lock it in place, and it'll let you quickly reposition your fender in seconds without untying or unclipping anything.

Basically what you do is you take the included fender lines right here. One end, you'll attach to the fender. The other end, what you're gonna do is just pull this in a zigzag motion through the cleat right here, and you'll notice once you get it through there, and then you pull on it. It's gonna hold that fender in place. And then the nice thing about it makes that docking and rafting up easy as if you're a solo, a newbie, or teaching your kiddo how to tie up your boat.

But then to release it, all you have to do is just release the tension on it and it'll come right out just like that, very simple. Now this kit will include everything shown here on the table. It includes the two hangers, the two-precut, four-foot long by 3/8-inch thick fender lines, so you don't have to measure a trim or buy anything extra. Now also, if you're rafting up with other boats, it can be easy to forget to pull a fender in or to assume someone else on the boat already did it before taking off. So this clip's gonna hold tight even if someone didn't pull your fenders in and they drag the water a bit.

And because they hold tight, it's one less thing to worry about at the dock. You won't have to go to retrieve a lost bumper and you won't have to worry about your line slipping if the wind kicks up. Now these hangers are a black UV-resistant composite hanger. They'll blend in with your boat rails without calling attention to itself. And the fender lines right here, these are black UV-resistant composite or braided polypropylene ropes. These are gonna stay flexible even after sun exposure or long weekends on the water. What's nice about this, the setup is lightweight, made for everyday lake use. Now also, if you have any additional questions regarding this rope or any other item we carry, please feel free to reach out to us so we can help you get all your questions answered. But that's gonna do it for a look at the Attwood Zig-Zag Fender Hangers with the fender lines.