Taylor Made Fender Line Hanger - PVC - 9-1/2" Long

Video Transcript for Taylor Made Fender Line Hanger Spec Review

Ellen: Hey everybody, I'm Ellen here at etrailer.com and we're taking a really quick look at the Taylor Made Fender Line Hanger. This helps to hold any of your lines up and out of the way, keep them together so they're not just kind of hanging out all over the place, getting tangled up or falling out or anything else like that. So, pretty simple design we'll just have two loops that are formed by the little snaps here to hold everything in place. So to get that around the railing, we'll just put it in around the with that loop. And then you can loop your lines through that larger end. Overall length of this guy is about, let me get a tape measure here so we can look at.

It looks to be about 18 inches from one snap to the other. When it's completely stretched out here.let's say it was about 20 inches overall from end to end. Our smaller circle or a smaller loop is about two inches, two and a quarter. And then the larger portion is about five inches. So overall, whenever it's looped together, it's about eight inches long.If you we're to squish it down a little bit more, it'd be closer to about nine and a half.

The thickness or width of the line is about three quarters of an inch. And then about an eighth of an inch thick. It's made out of durable PVC. So you don't have to worry about it corroding or anything like that should last a long time. Won't fade or crack in the sun and helps to just keep any of those lines up and out of the way and prevent any kind of tripping hazards or anything getting lost.

That's pretty much all there is to it for our quick look at the Taylor Made Fender Line Hanger. I hope this has helped in deciding if this is the right piece for you. We do have a lot of other Marine and RV accessories available here at etrailer.com. So check them out. Thanks for watching..