Taylor Made Charlevoix Boat Flag Clips for 1/2" Diameter Burgee Poles and Antennae - Qty 2

Video Transcript for Review of Taylor Made Boat Accessories - 36957925

Hi there. I'm Michael with etrailer.com. Today we're taking a look at the Taylor Made Charlevoix boat flag clips for half-inch diameter Burgee poles and antennas. These clips are going to allow you to fly your Burgee or courtesy flags from your boat's pole or antenna. The clips do clamp onto the pole and are very easy to adjust to fit the length of your flag's heading. They're made of a nylon material, so they're going to be very durable.

You're not going to have to worry about them rusting or corroding in those aquatic settings.Just to give you an idea of how they work, I'm going to use one of our hitch pins here that we have lying around. When we get our clip on there, you can see how the teeth catch together. They're going to allow it to secure tightly to our pole. To remove them, I'm going to pull back on the tabs on the side. Now I would not categorize this as the easiest thing to do, but it will come off.

That's probably a good thing. We don't want them coming undone too easily. Now, if your antenna is less than a half inch, they also include these neoprene buffer strips that you can cut and put inside there to create a tighter fit onto those smaller antenna poles, so your kit is going to come with these two clips and the neoprene strips, and that's going to complete our look at the Taylor Made Charlevoix boat flag clips for half-inch diameter Burgee poles and antennas..