Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2011 Chrysler Town and Country
We'll connect you with nearby partnered installers who know this exact setup.
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Silver - 500 lbs
In Stock
$699.84
Retail:$773.00
You Save: $73.16
2011 Chrysler Town and Country
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
- Used (1)
Adarac Ladder Racks
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Handles Heavy Loads: 500-lb capacity (250 lb per bar) easily supports work or sport gear.
- Tonneau Compatible: Mounts in stake pockets so inside-rail covers fold and seal normally.
- Quick No-Drill Setup: Foam-padded rails clamp to bed rails using included hardware.
- Secure Cargo: Sliding aluminum load stops and tie-down hooks keep items from shifting.
- Built to Last: Rustproof anodized aluminum resists corrosion and stays lightweight.
Features to know about
Hauls Work and Weekend Loads: Carries Up To 500 lbs
The Adarac Pro Series Custom Truck Bed Ladder Rack handles up to 500 lbs, or 250 lbs per bar, so it’s ready for both job materials and outdoor adventures. You can load ladders, lumber, and pipes during the week, then haul kayaks, surfboards, or skis on the weekend. The crossbars measure 66" long x 1-1/2" wide, giving plenty of space to spread out gear while keeping the truck bed open for other cargo.
Keeps Your Tonneau Cover Fully Functional: Stake Pocket Mount Design
This rack mounts securely into the stake pockets, leaving the inside bed rails clear, so it works with most inside-the-rail tonneau covers including hard tri-folds and roll-ups. The vertical uprights don’t angle inward, which means folding or rolling the cover stays easy and unobstructed. You get full use of your cover’s panels and weather seal without removing the rack.
Simple Setup and Removal: No-Drill Installation
No drilling is needed for installation. Foam-padded utility rails sit on top of the bed rails and use aluminum stake pocket inserts for a solid mount that won’t scratch your truck. The uprights can be repositioned along or removed from the utility rails whenever you need more space for tall or bulky items.
Ready for Accessories: Slotted Crossbars and Utility Rails
Each square crossbar has mounting channels along the top and bottom, and the utility rails include channels too. That lets you add tie-downs, load stops, or other accessories exactly where you need them. The removable rubber strip on top of the crossbars keeps loads from slipping and can be taken out to access the channels when mounting gear.
Built To Last: Rustproof Aluminum with Anodized Finish
The lightweight aluminum construction is rustproof, so it won’t corrode in wet or salty conditions. An extruded anodized aluminum finish adds extra protection and keeps the silver rack looking sharp over time. It’s a setup made for years of hauling, whether you’re on the job or heading out to the water.
Specs
Weight and Capacity
- Carrying capacity: 500 lbs (250 lbs per bar)
- Load stop maximum capacity: 100 lbs per load stop
Dimensions
- Crossbar dimensions: 66" long x 1-1/2" wide
Warranty
- Limited warranty: 1-year
F2010011 ACI Adarac Pro Series Custom Truck Bed Rack - Aluminum - 500 lbs
Replaces Adarac 4000964
Item # A4000964
Installation Details
This Product Fits The Following Vehicles
- 2004 - 2027 Ford F-150 5-1/2 Foot Bed
- 2022 - 2024 Ford F-150 Lightning
- 2010 - 2027 Ford F-150 Raptor
- 2006 - 2008 Lincoln Mark LT 5-1/2 Foot Bed
Ratings & Reviews
4.7
55 reviews
by:
Lawrence
07/16/2021
Ford
F-150
I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.
by:
Mark
06/27/2024
Easy to install and remove. User friendly and adjustable.
I'm very happy with it.
I'm very happy with it.
by:
Gordon
06/20/2022
by:
Peyton
05/10/2024
2021
Ford
F-150
by:
Patrick
11/01/2025
2022
Ford
F-150
Overall good product, works with my trifold tonneau cover, I do wish it had some sort of cover for the stake pocket where the upright bolts in. I wish I came with additional channel nuts as well for bolting onto the crossbars
by:
Marc
05/10/2024
2023
Ford
F-150
I have had the rack installed for about six weeks. After a few trips on everything from highways to gravel and dirt roads it has been very solid. We have a fly fishing rod case mounted on it and it's solid. I think there is a little wind noise but not much. Easy to install, lots of good paper instructions as well as videos on line. Next trip will have our canoe mounted on top.
by:
Rob
07/01/2025
2022
Jeep
Gladiator
I bought this rack believing installation did not require drilling. That may be true for installation on many vehicles, but does require drilling to install on a Jeep Gladiator. Special instructions that come with the rack are quite clear on this for both a Jeep Gladiator and a Toyota Tacoma up to 2023.
A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.
To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.
I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.
A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.
To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.
I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.
by:
Michael
09/25/2026
Adarac pro was as advertised and assembly went well. Looks good on the truck. Delivery was ahead of schedule.
Always good doing business with etrailer
Always good doing business with etrailer
by:
Gary
04/20/2022
I had delayed trying to get ladder racks because I wasn't sure whether it would work with my bed cover. I was able to locate the correct model online and verify my findings and order on the phone Rodney was helpful and friendly.
Gary W.
4/21/2023
Great. The rack looks good and is very stable
by:
Ken
08/24/2020
2020
Ford
F-150
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
Kenneth S.
8/20/2021
It works great with my bakflip hard cover
by:
Tran
06/22/2021
I love my Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs. I found it easy to install by myself—including cutting the deck plastic trim to expose my stake covers. Its black finish complements my truck. Best of all, it enables my BAK Industries tonneau cover, Revolver X2, to maintain is full functionality. My only recommendation would be to include more foam strips. They are intended to fill the gaps between the end of the grooves on the plastic trim to the end of the rail. There was enough for one strip of foam on each end rather than two (one on each side of the rail) on each end of the rails.
by:
Russell
08/27/2026
Looks like the rack will work out good for hauling canoes and kayaks and such. Appears well made, and installed pretty easily.
by:
Richard
04/13/2021
2020
Jeep
Gladiator
Took a couple of hours to install. One on the few you can use with hard tri-fold bed cover. Going to add side bars for off-road tools.
by:
Oleg
10/14/2022
I have had this rack for one year. So far, so good. It looks great, way better than other models I see around. Do not rust; sturdy enough. Works well with trunk cover. Installation is a bit tricky, but any handyman can do it alone in a couple of hours. Good purchase overall
by:
Matt
06/18/2025
2025
Ford
Ranger
After 90 minute install, it feels sturdy and looks great. Ford ranger 2025, no cutting or drilling required. I like the fact that it has some rubber strips on top, should work well for carrying a kayak. Will need to unscrew antenna if carrying something in middle over roof.
Gwendolyn Y.
6/20/2025
Happy to hear that you love the rack, Matt! When do you get to use it to carry your kayaks to the water?
by:
Donald P.
11/24/2025
Package arrived on time I have been out of town for a few weeks so just put it together today
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far
by:
Jose A
03/10/2025
2022
Jeep
Gladiator
Clean, sleek look. Easy to install!
Gwendolyn Y.
3/11/2025
Looks great on your Gladiator, Jose! What are you going to put on the rack?
by:
Mark
06/25/2025
The ladder rack is great. Fits over my tonneau cover. And carries everything I put up there.
by:
Sergio
09/07/2022
I really like the aesthetics of the ladder rack and functionality. Its sturdy, durable and looks slick !
by:
John t
04/14/2019
Works great with the backflip hard cover.
Should have some predrilled hole to attach tie down straps.
Should have some predrilled hole to attach tie down straps.
Jack T.
4/15/2020
Great
by:
William
04/21/2023
Love this ladder rack...it works great with my tauneau cover, Iuse it to transport our Kayaks when we go camping and it is great to still be able to use my bed with the tauneau cover on to protect our gear in inclimate weather. I would absolutely buy it again. Thanks.
by:
Myron
02/12/2021
This rack is very solid and travels well.
I have had no problems but I should say I have used it lightly.
I have had no problems but I should say I have used it lightly.
Myron
2/13/2022
I have traveled with kayaks at highway speeds from Wisconsin to Texasthree times with two kayaks and have no problems.
25
55
true
Show More Reviews
See what our Experts say about this Adarac Ladder Racks
- Installing Ladder Rack On 2021 Ford F150 With Bakflip Tonneau CoverI believe you are wanting to install a truck bed roof rack on your 2021 Ford F-150 short bed while keeping your Bakflip tonneau cover installed. If so, then you will want to go with a different rack as the Yakima system you currently have is not made to attach to this tonneau cover or the side rails of your truck bed. Instead, I recommend going with Adarac Pro Series Custom Truck Bed Ladder Rack which can be found in Silver # A4000964 or Black # A86RR. This is a roof rack system that...
view full answer... - Ladder Rack Recommendation for 2019 Ford F-150 Short Bed for Use with Bak RevolverThe BAK Revolver tonneau cover is actually the easiest to fit a ladder rack with and the best choice for your 2019 Ford F-150 short bed would be the part # TH43002XT-501 for if you have a 6-1/2 foot bed or part # TH43002XT-508 for if you have a 5-1/2 foot bed.
view full answer... - Stake Pocket Compatible Ladder Racks for 2019 F-350 With TonneauThe Thule TracRac Contractor Truck Bed Ladder Rack - Side Mount - Steel - 250 lbs # TH14750 gets the support it needs from the floor which is why there isn't a similar rack compatible with stake pocket use. You can get a full ladder rack that will use the stake pocket and utilize the full side to side bracing for support like the Adarac # A70450. IF you let me know your specific vehicle, I can give you a compatible rack option. To not interfere with a folding cover you would need to...
view full answer... - Ladder Rack Lumber Rack With Over Cab Extension for 2020 Ford F-150 With 5.5 BedThe 2020 Ford F-150 with BAKFlip G2 folding tonneau cover is compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs # TH43002XT-508EX. The sliding rack rails mount in the stake pockets and will work with your folding tonneau. Your dealer is not completely off as cutting the front stake pocket rail is required to expose the stake pocket which is there. If you measure back from the cab about 3 inches and measure in 1-1/2 inches from the inside of the...
view full answer... - Will the Thule TracRac SR Work with the BAKFlip MX4 on a 2018 Ford F-150 5-1/2 Foot BedI do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part # BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only tonneau cover that we know for sure works...
view full answer... - Does the TracRac SR Fit Simultaneously with the BAK Revolver X4s on My 2022 Ford F-150?Based on your recently-searched parts, I am assuming you have a 5-1/2 foot bed on your 2022 Ford F-150. If that is the case, the Thule TracRac SR # TH43002XT-508 and the BAK Revolver X4s # BAK56ZR are definitely compatible. I went ahead and attached a photo of a neighbor using the TracRac SR and the X4s on his Ford F-150. However, while it is not a huge issue, there may be some very slight rubbing against the base of the innermost sliding upright of the TracRac SR since they angle toward...
view full answer...
- Best Way To Carry 4 Kayaks On Top Of The Adarac Pro Series Ladder RackThe Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000964 is an excellent rack for transporting 4 kayaks on your 2013 Ford F-150 with the 5-1/2' bed. The most economical way to safely haul your 4 kayaks is to use 2 of the Malone Stax Pro 2-Kayak Carrier w/ Tie-Downs # MPG115MD. This will attach to your ladder rack's square bars and provide a foam platform for your kaysk; tie-down straps are included. While the method above will work well, I think the best option...
view full answer... - Recommended Ladder Rack that is Compatible w/ a BAKFlip MX4 on a 5-1/2 Foot Bed 2020 Ford F-150The BAKFlip MX4 Hard Tonneau Cover item # BAK48329 leaves your side pockets exposed so this gives you two options. If you are not needing to get all the way into your bed while the ladder rack is loaded you can use the Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43002XT-508. This is by far the best option if you're ok with having to slide the rear uprights forward when opening your tonneau cover. The ladder rack uprights are angled in so they interfere with the folding cover...
view full answer... - Compatibility of Ladder Rack with UnderCover Ultra Flex Tonneau on 2018 F-150 5-1/2 Foot BedThe Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000964 will work well on your 2018 Ford F-150 with 5-1/2 foot bed. The tonneau you mentioned does have the internal bed rails so the stake pocket mounted ladder rack will allow the proper seal of your tonneau and allow the spacing between straight uprights to allow the folding of your tonneau cover without interference.
view full answer... - Will Adarac Pro Series Rack Work With BAKFlip MX4 Cover On 2020 Ford F-150 5-1/2' BedYes, the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000964 will work with the BAKFlip MX4 Hard Tonneau Cover part # BAK48329 on a 2020 Ford F-150 5-1/2' Bed. In fact, it is the only ladder rack which will allow for full unimpeded use. The base rail for the ladder rack should butt right up against the gasket for the tonneau but if need be the rail can actually sit on top of the gasket without damaging it and letting water in. This is a very common duo so I'm sure you'll be happy...
view full answer... - Recommendation For Occasionally Carrying Kayaks On a 2017 Ford F-150 Short Bed With Tonneau CoverThe Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 is going to be one of the easiest ladder rack systems to completely remove from your 2017 Ford F-150 with the 5-1/2' bed and a tonneau cover. It attaches though the stake pockets unlike the Truxedo TS Rails # TH65FR which mount behind the tonneau cover rails. I do have another recommendation in the Yakima LongArm Bed and Roof Load Extender # Y01149-1150. You could use this along with the Lomax Hard Tonneau Cover # LOM97FR....
view full answer... - What Ladder Rack Will Work With The BAKFlip MX4?The BAKFlip MX4 # BAK48329 will leave the stake pockets open for ladder racks like the Thule TracRac # TH43002XT-508EX, but since the TracRac towers lean in, it could cause clearance issues when folding your tonneau cover. The Adarac Ladder Rack # A4000964 would be a good option to avoid that issue. It's towers are straight upright so it's not going to interfere with your tonneau cover.
view full answer... - How to Fit Rhino-Rack J-Style Kayak Carrier to Adarac Pro Ladder RackIn order to install the Rhino-Rack J-Style Kayak Carrier # S512 on your Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 you're going to need the Crossbar Adapters # KC-FK8. This allows you to install the kayak carrier using the top channel of the ladder rack crossbars.
view full answer... - How To Carry Kayaks On a 2018 Ford F-150 with Tri-Fold Tonneau CoverThe only ladder rack that allows for 100% fully unimpeded use of a tri-fold tonneau cover is the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000964 for 5-1/2' beds or part # A4000946 for 6-1/2' beds. This ladder rack mounts in the stake pockets so the tri-fold tonneau cover must sit inside the bed rails such as the BAKFlip MX4 Hard Tonneau Cover for example. This ladder rack also has vertical uprights which will clear the panels on your tonneau cover when you go to fold them...
view full answer... - Ladder Rack with Bakflip MX4 on Ford F-150 5.5 ft bed?The BAKFlip MX4 Hard Tonneau Cover installs inside the bed rails so you can use a ladder rack which mounts in the stake pockets. The way the ladder rack must install it doesn't give you many options. There are two I recommend looking at and the choice comes down to what function they are going to be used for. Both can slide up and down the tracks but can not be moved up and down. The first is the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-785. The Thule TracRac SR...
view full answer... - Recommended Tonneau Cover and Rack to Carry 3 Kayaks with 2018 F-150 5-1/2 BedThe RetraxONE XR # RTT-60373 and the Rhino Rack # RRVA165B-RRRLT600 crossbars and a carrier like the Thule Stacker, part # TH830 could be used for the purpose you described, but because the kayaks you'll be carrying are twice as long as the truck bed you'll have half of each kayak hanging off of the rear of the truck, which means that less than half of the length of the kayak will secured by the carrier. You're more than welcome to go this route, but I don't believe this would work very...
view full answer... - Best Ladder Rack To Use With Kayak Carriers And 3 Fold Tonneau Cover On A 2017 Ford F-150We do have ladder racks that will allow you to keep using your tonneau cover, but this one # TH500XTB is not the right rack for you since it needs to utilize the inside rails of your 2017 Ford F-150. You could use the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 because it installs in the stake pockets of your F150. Notice the side posts of the ladder rack, this rack is perfectly upright and does not taper in like some of the other. This is great for 3 fold tonneau covers because...
view full answer... - Can I Use My X-Line Tonneau Cover with the TruXedo Elevate Rack # TX96NV?While we have the perfect ladder rack solution for you, I confirmed with TruXedo that the TruXedo Elevate # TX96NV does not fit with your Line-X hard folding tonneau cover on your 2018 Ford F-150 (5-1/2 ft. bed). This is because the Elevate is only designed to work with specific models of BAK, Extang, Retrax, and TruXedo tonneau covers. With that being said, I recommend using the Adarac Pro Series Ladder Rack # A86RR (matte black) or # A4000964 (silver). With the Pro Series, the rack installs...
view full answer...
- What Ladder Rack do You Recommend to Use with the Revolver X4s # BAK56ZR on a 2022 F-150? As far as the Thule rack, I believe you are referring to the Thule TracRAC SR # TH43002XT-508. You are definitely correct that this works with the BAK Revolver X4s # BAK56ZR. However, it is important to note that since the uprights of the TracRAC SR angle inward toward the truck, there may be some slight rubbing of the X4s against the uprights when opening and closing. For your 2022 Ford F-150 with a 5.7 bed, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A86RR...
view full answer... - Adarac Pro Series Truck Rack Height And Canoe Carrier OptionsPer the manufacturer, the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 has the following height dimensions. "Height above the box rail: 24 in. for mid-size, 26 in. for full size and 27 in. for Super Duty trucks. Load dividers sit an additional 3 in. above cross bars. Cross bars are 72 in. L x 1 1/2 in. W x 1 1/2 in. H" Additional options to consider if the sole purpose here is to transport your canoe include the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar...
view full answer... - Tonneau Cover and Rail/Rack System for a 2023 Ford F-150 RaptorI've got a tonneau cover solution for your 2023 Ford F-150 Raptor but as of right now (May 2023) the Pace Edwards UltraGroove cover hasn't been confirmed to it your vehicle. To get a hard tonneau cover and rail/rack system I recommend using the following: - BAK Revolver X4s Hard Tonneau Cover - Roll Up # BAK56ZR - Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 The BAK Revolver is my favorite cover because it combines the sleek look of a soft cover with the strength and security...
view full answer... - Recommended Ladder Rack for 2018 Ford F-150 with Tri-Fold Tonneau CoverThe best ladder rack to use with a tonneau cover on a 2018 Ford F-150 is the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000964 for models with 5-1/2' bed or part # A4000946 for models with 6-1/2' bed. The reason the Pro Series is best is because it mounts inside the stake pocket holes so if the cover mounts inside the bed rails you will not have issues with the rails. Furthermore, the uprights are vertical so you can fold the panels back on a tri-fold tonneau cover without issue.
view full answer...
- What Ladder Rack do You Recommend for My Folding BAK Tonneau Cover with Open Stake Pockets?I do not know which particular cover you have on your vehicle, but it sounds like you have a folding BAK tonneau like the BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum # BAK26101. With this cover, since the stake pockets remain open for stake-pocket mounted accessories, you will be able to use TracRac models that only install into the pockets such as the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-508. TracRac models that clamp onto the bed rails will not work with the...
view full answer... - Difference Between Adarac Aluminum # A4001234 and Pro Series # A4000964 Ladder Racks Both the Adarac Aluminum Series Ladder Rack # A4001234 and the Adarac Pro Series # A4000964 that you referenced in your question are confirmed to fit your 2014 Ford F-150 with the 5-1/2 foot bed. Both ladder racks will work well with your roll-up tonneau cover, as long as it installs inside the bed rails. The only real difference between the two models is the design of the uprights, as you mentioned. The Aluminum # A4001234 features a more contoured upright that is designed to match the...
view full answer...
Do you have a question about this Ladder Rack?
Used Items Available
Condition: Missing Parts
Notes: surface scratches and missing hardware
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Alex H
Updated by:
Mark S
Updated by:
Noah M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Marc
5/11/2025
The rack works great. We’ve had the canoe on it. It’s solid. It has not needed any adjustments. The paint is holding up just fine. We’ve removed and reinstalled it twice with no problems. Very glad we got this one