How to Fit Rhino-Rack J-Style Kayak Carrier to Adarac Pro Ladder Rack

Question

Question:

I have an adarac pro series ladder rack #A4000964. Need to know what mounting brackets I need to attach the rhino rack.

asked by: Alex A

0

Expert Reply:

In order to install the Rhino-Rack J-Style Kayak Carrier # S512 on your Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 you're going to need the Crossbar Adapters # KC-FK8. This allows you to install the kayak carrier using the top channel of the ladder rack crossbars.

expert reply by: Jon G

0

Answer 1

Thank you for all of that info! So currently, as of April 2020, the only manufacturer to have a roof rack fit for your 2020 Ram 1500 New Body Style is Yakima which means that you're looking for the JetStream system. This consists of the 70"…

view full answer...

Answer 2

Hello Dave. Both the Thule Hull-A-Port #TH834 and the Kuat Class 4 V2 #KU53VR are great options that will be able to handle your 75 lb Hobie Revolution 13s. Between the two, I recommend that you go with the Kuat Class 4 V2 #KU53VR. The main reason I…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Morgan, the best hitch for what you are looking for would be the Draw Tite part #DT73RR which has the easiest install and the highest tongue weight rating. The hitch does fit right up under the rear bumper which will slightly reduce ground…

view full answer...

Answer 7

Hey Kimmy, awesome picture! For a hitch I recommend our own etrailer Trailer Hitch Receiver #e25TR. This has a concealed cross tube for a nice clean look and better ground clearance. It also has a matte black finish which will blend in well with the…

view full answer...

Answer 8

Hey Nick congrats on the new car! The bottom portion of the receiver for the Curt item #C69VV sits 11-3/4" above the ground when installed on your 2025 Subaru Outback Premium. If you're worried about ground clearance, I recommend installing…

view full answer...

Answer 9

Hi Jessey! We have everything you need for your 2024 Subaru Outback. To start, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR. This is a little bit of work to get installed, but it is going to be the best…

view full answer...

Answer 10

Hey Lawrence thanks for the information! I wasn't able to find any good pictures of the inside of your Axle Tecknology BD2-655 drums. What you'll need to do is pull one of the hubs off and look at the inside. If they're smooth like the…

view full answer...

Answer 11

Hey Poches, happy to help! The torque spec for the Draw-Tite Max-Frame Hitch #DT73RR is 50 lb-ft for all the bolts that the hitch comes with. You can also find this listed in step 8 of the installation instructions if you want to double-check while…

view full answer...

Answer 12

Hey Andy, the bolts that come with the Demco Spare Tire Mount for up to 4" Trailer Tongue #DM15851-52 that you referenced are right at 4 inches long 3/8 inch diameter and are a fine thread. Did you lose yours?

view full answer...

How to Fit Rhino-Rack J-Style Kayak Carrier to Adarac Pro Ladder Rack

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching