Aluminum Tie-Downs for Adarac Aluminum and Aluminum Pro Series Ladder Rack Utility Rails - Qty 4

See what our Experts say about this Adarac Accessories and Parts

• Adarac Aluminum Ladder Rack Compatibility on 2017 Toyota Tundra 5-1/2 Foot Bed with Deck Rail System
  The Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4001665 is a confirmed fit for your 2017 Toyota Tundra 5-1/2 Foot bed with deck rail system. As long as your Gator roll up tonneau cover has the inside-the-rail design, it will work well with your truck. We don't carry the Gator Tonneau Covers to confirm a fit, but from what I see online, it will work well as nearly all the covers have the inside-the-rail design that is compatible. With this ladder rack,...
  view full answer...
• Are There Channel Nuts Available For Adarac Series Ladder Rack
  The channel nuts you request for your Adarac Series Ladder Rack # A90630, are only available as a kit shown in # A4000882.
  view full answer...
• Tie Down Anchor and Load Stops that Fit Adarac Pro Series Ladder Rack A4003497
  The dimensions of the Adarac Ladder Rack part # A4003497 top channel are pretty similar to what the Rola accessories you mentioned would fit but it's never been tested. Instead I would recommend going with the # A4000882 for tie down anchors and # A4000880 for load stops.
  view full answer...
• Adarac PRO Series Racks Overall Height Above Bed Rails
  The Adarac Pro # A4000952 is 30" tall from the bed rail to the tallest point of the rack when installed. This rack is designed to sit a couple inches above the cab, as well. For carrying kayaks, you'll want to add the Aluminum Tie-Downs # A4000882 to provide a secure tie down point or the Load Stops # A4000880 which have tie down points integrated while also providing stabilization of your cargo.
  view full answer...
• Will Adarac Ladder Rack For 2012 Ram 1500 With 5-1/2 Foot Bed Mount Yakima BowDown
  Yes, the Yakima BowDown kayak carrier will be able to mount directly onto the Adarac ladder rack you mentioned that fits your 2012 Ram 1500 with a 5-1/2 foot bed, which is the following part: - Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001235 The BowDown is a universal fit that mounts to all shapes of crossbar, including the 1-1/2 inch square crossbars of the Adarac. This will provide you with an excellent way to transport your kayaks, as well as haul other gear if needed....
  view full answer...
• Recommended Ladder Rack For A 2021 Toyota Tundra 5.5' Bed With Deck Rail System
  For your 2021 Toyota Tundra 5-1/2' bed with deck rail system I recommend the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500lbs # A4001665. This ladder rack will mount in the stake pockets of your bedrails which will allow you to also use an inside of the bedrails style tonneau cover. It has a carrying capacity of 500lbs (250lbs per bar) and the crossbars are 66" long x 1-1/2" wide. The utility rails have mounting channels for additional accessories like the # A4000882...
  view full answer...
• Tie Down Anchor and Ratchet Strap Recommendation for Adarac Aluminum Series Ladder Rack
  Adarac recommends the Aluminum Tie-Downs for Adarac Aluminum and Aluminum Pro Series Ladder Rack Utility Rails # A4000882 in the channels of their ladder racks. Then for ratchet straps to fit the anchors we have the Retractable Ratchet Straps # EM34415 which are 6 feet long and have a 500 lb capacity.
  view full answer...
• Recommended Ladder Rack For 2017 Chevy Colorado With 6 Foot Bed and BAKFlip Cover
  The BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish part # BAK48125 or 448125 (manufacturer part number) that fits the 2017 Colorado LT with 6 foot bed is compatible with the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000951. The Adarac Pro Series is the only truly compatible rack with the BAKflip because of it's straight uprights that allow you to fold and unfold the cover without interference. Also the Adarac Pro Series ladder rack hardware does not interfere...
  view full answer...
  
• Best Ladder Rack for 2017 Ford F-150 With 5-1/2 Foot Bed and BakFlip MX4 Tonneau Cover
  The best option to install a ladder rack on your 2017 Ford F-150 with a 5-1/2 foot bed and the BAKFlip MX4 Hard Tonneau Cover # BAK48329 is the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964. The reason for this is the Adarac sits fully on the bed rails of your '17 F-150 and won't overlap to come in contact with your MX4 and the arms on the Adarac are wide enough that you can fold your tonneau up without it coming into contact with the rack. The Adarac Pro Series Custom Truck...
  view full answer...
• Ladder Rack Confirmed to Fit a 2023 GMC Sierra 1500 With 6-1/2' Bed
  Yes, there are some ladder racks that have been confirmed to fit your 2023 GMC Sierra 1500 with 6-1/2' bed. - Adarac Aluminum Series Custom Truck Bed Ladder Rack # A79HG The Adarac Aluminum Series Custom Truck Bed Ladder Rack # A79HG is made in the USA, has a 500 lb. capacity and will provide you with square crossbars with integrated mounting channels along the top and bottom that allow you to easily secure cargo and attach accessories. This rack will also work with Access roll-up covers...
  view full answer...
• Which Truck Bed Rack Will Fit My 2018 Chevy Colorado With BAKFlip Tonneau Cover?
  The BAKFlip MX4 Hard Tonneau Cover on your 2018 Chevrolet Colorado is mounted inside the bed rails, so it is compatible with ladder racks that mount on the bed rail via stake pockets. The crossbar feet you referenced will not fit your truck bed but I do have an excellent option for you to check out. I highly recommend the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000950 for 5' bed or # A4000951 for 6' bed. This is compatible with your tonneau cover and even allows it to fold all...
  view full answer...
• Is There A Ladder Rack That Is Compatible With BAKFlip MX4 Tonneau Cover On 2015 Toyota Tundra?
  Yes there is! You will want go with the Adarac Pro Series Custom Truck Bed Ladder Rack; this installs on top of the bed rails and has upright arms that will not interfere with the BAKFlip MX4 Hard Folding Toneau Cover. If you have the 5-1/2' bed then the correct version is # A4001666, and if you have the 6-1/2' bed then the correct version is # A4001671. This ladder rack features 66" long crossbars that have a T-slot channel on top. This allows for track-mounted accessories to be easily...
  view full answer...
• Adarac Aluminum M-Series Custom Truck Bed Ladder Rack On 2016 Toyota Tundra -
  I don't have the dimensions for the Tundra, but I can tell you that the distance from the bedrail to the top of the crossbar (excluding load stops on the ends of crossbars is 11-1/2" tall. You can subtract this from the total cab height of your truck to determine the measurement from the crossbar to the top of the cab. I have attached a dimensioned picture of the AdaRac # AD86FR to illustrate this. A popular item that users aditionally get are the AdaRac # A4000882 tie down points
  view full answer...
  
• Ladder Rack For 2020 Ford F-150 With BAKFlip MX4 Tonneau Cover To Carry 2 Kayaks
  The best ladder rack for your 2020 F-150 5-1/2' bed with BAKFlip MX4 tonneau cover is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000964. Your tonneau cover mounts inside the bed rails, allowing the truck bed rails to be free for the Adarac ladder rack to install onto. This ladder rack has straight upright bars which allow for the tonneau cover to fold properly, whereas some other ladder racks have slanted upright bars which restrict folding of the cover....
  view full answer...
• Bed Rack Compatible With A Backflip MX4 Tonneau Cover On A 2017 Ford F-150 With 5-1/2ft Bed
  The only rack compatible with the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish Item # BAK48329 on your 2017 Ford F-150 is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs Item # A4000955. This rack has a 500lb weight capacity and works with skis, snowboards, canoes, kayaks, surfboards, and other recreational gear. Each cross bar has a channel to accept different accessories like load stops Item #A4000880 and tie downs Item #A4000882. The rear...
  view full answer...
• Will the Adarac Pro Series Custom Ladder Rack Work with the RetraxONE MX Hard Tonneau Cover?
  Yes, the Adarac Pro Series Custom Ladder Rack # A32BJ is compatible with the RetraxONE MX Hard Tonneau Cover RT60386 on your 2017 Ford F-250 Super Duty (6-3/4 Ft. Bed). If you need tie-downs and mounting points for your ladder rack, I recommend the SmartStraps Ratchet Tie-Down Straps w/ S-Hooks - 1" x 10' # 348149 and the Aluminum Tie-Downs for Adarac Aluminum and Aluminum Pro Series Ladder Rack Utility Rails - Qty 4 # A4000882. You can also purchase the Load Stops for Adarac Truck Bed...
  view full answer...
• Finding A Ladder Rack To Pair With BAKFlip G2 Hard Folding Tonneau Cover On 2016 Chevy Colorado
  Luckily, the BAKFlip G2 Hard Tonneau Cover - Folding # BAK26125 installs inside the bed rails, leaving the top of the bed rails exposed for specific ladder racks to mount to. For your 2016 Chevy Colorado 6' bed, I recommend going with the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000951. This is a popular option which has completely vertical upright arms that do not bend in, allowing for full functionality of your folding hard tonneau cover. The ladder rack...
  view full answer...
• What Economical Retractable Tonneau Cover Works with My Ladder Rack on My 2020 Toyota Tundra?
  Yes! You are correct that I was talking about a 6-1/2 foot bed on a 2020 Toyota Tundra. The Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001670 will definitely fit. As far as being able to move the rack away from the tailgate - yes, you will be able to position the uprights/crossbars forward away from the rear. In most truck models, the mounting pockets are located under a small, square plastic tab. There are also some truck models that require you to saw off the top surface...
  view full answer...
• What Ladder Rack do You Recommend for a 2022 Chevy Silverado 2500 with 6-3/4 Foot Bed
  Yes! For a great removable ladder rack for your 2022 Chevy Silverado 2500 with a 6-3/4" short bed, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4003991. Not only does this rack come with a 500 pound weight capacity, it also has easily-removable uprights and crossbars. Also, another advantage is that the uprights can be repositioned anywhere on the bed for a custom bar spread. The top of the crossbars stand 27 inches above your truck's bed, you should...
  view full answer...
• Which Ladder Rack Fits A 2020 Ford F150 With Bed And Roll-N-Lock Toneau Cover?
  You will want to verify, but it looks like the Roll-N-Lock tonneau covers for the 2020 Ford F150 mount inside the bed rails and not in the stake pockets. In this case, you can install a rack that mounts on top of the bed rails such as Adarac Pro Series Custom Truck Bed Ladder Rack which comes in black # A86RR or silver A4000964. This rack has 2 66" long crossbars that have integrated channels in which you can install Tie-Downs # A4000882 or Load Stops # A4000880. The weight capacity for...
  view full answer...
• Installing Ladder Rack On 2021 Ford F150 With Bakflip Tonneau Cover
  I believe you are wanting to install a truck bed roof rack on your 2021 Ford F-150 short bed while keeping your Bakflip tonneau cover installed. If so, then you will want to go with a different rack as the Yakima system you currently have is not made to attach to this tonneau cover or the side rails of your truck bed. Instead, I recommend going with Adarac Pro Series Custom Truck Bed Ladder Rack which can be found in Silver # A4000964 or Black # A86RR. This is a roof rack system that...
  view full answer...
• Adarac Aluminum Series Truck Bed Ladder Rack Compatibility With A 2022 Toyota Tacoma
  Yes, the Adarac Aluminum Series Custom Truck Bed Ladder Rack # A79ZR is a compatible fit for your 2022 Toyota Tacoma. You are also correct that it is compatible with specific tonneau covers that sit inside of the bedrails. This rack mounts into the stake pockets of your Tacoma's bedrails for an easy installation that also allows for room an inside rail tonneau cover. This rack has a carrying capacity of 500lbs and features uprights that can be easily repositioned along or removed from...
  view full answer...
• Economical Ladder Rack Fit on 2008 Toyota Tundra With Deck Rail System
  While we do have an option for a more economical ladder rack that will work, the Erickson you mentioned is not a fit for your 2008 Toyota Tundra with the Deck Rail System. What I recommend instead that will work with that system is the Adarac Aluminum Series Custom Truck Bed Ladder Rack, which will fit as it installs in your stake pockets as opposed to the side rails of your Tundra, leaving the entirety of the bed wide open and allowing you to still use a tonneau cover if you have one....
  view full answer...
• Recommended Ladder Rack For 2016 Ford F-150 With 5-1/2', 6-1/2', and 8' bed.
  The most economical ladder rack that will still allow you to use your inside-the-rail bed cover on your 2016 Ford F-150 is the Adarac Aluminum Series Truck Bed Ladder Rack. If you have a bed cover that mounts on top of the bed rails instead of inside the bed rails then you will not be able to install a ladder rack without removing the bed cover. For 5-1/2' bed the correct ladder rack is Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001234. For 6-1/2' bed the correct ladder rack...
  view full answer...

Do you have a question about this Accessories and Part?