bing tracking image
  1. Trailer Hitch
  2. CURT
  3. For Towing
  4. Class II
  5. 1-1/4 Inch Hitch
  6. 350 lbs TW
THIS ITEM IS NOT A FIT FOR
1988 Ford Van
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12188
In Stock
$246.40
Retail:$376.95
You Save: $130.55
Trailer Hitch
Not Confirmed to Fit

1988 Ford Van

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12188 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (91)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C12188

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 3,500 lbs (GTW): Handles small trailers, campers, and utility loads with ease
  • Holds up to 350 lbs (TW): Fits bike racks, cargo carriers, and Class II towing accessories
  • Bolt-On Design: Installs using factory hardware—no drilling or welding required
  • Concealed Cross Tube: Keeps a clean look with only the receiver visible below the bumper
  • Gloss Black Powder Coat: Dual-layer finish resists rust and road wear for lasting durability
Made in USA

Features to know about

Haul Light Loads with Confidence: Class II Strength for Everyday Towing

This hitch handles up to 3,500 lbs gross trailer weight and 350 lbs tongue weight, giving you solid capacity for small trailers, boats, or utility loads. The Class II, 1-1/4" x 1-1/4" receiver is built for light-duty hauling without the bulk of a larger setup. Whether you’re pulling a small camper or adding a cargo carrier, it’s sturdy enough for regular use.

Make Loading Gear Easy: Works Great with Bike Racks and Cargo Carriers

The receiver opening fits most Class II accessories like bike racks or cargo trays. It’s perfect when you want to carry extra gear without losing access to the rear door. The square-tube design keeps everything steady and secure on the road so your bikes or storage platform stay in place.

DIY-Friendly Install: Bolt-On Design with No Welding Required

The hitch uses factory existing hardware points for a straightforward, bolt-on installation. You don’t have to weld or modify anything, and the precision robotic welding means everything lines up the way it should. It’s an easy weekend project with common tools—no shop time needed.

Built to Last Through the Seasons: Powder Coat Over Protective Base

The fully welded steel construction is finished in a gloss black powder coat over a protective base coat. That combination helps resist rust from road salt, moisture, and debris. Even after plenty of miles, the hitch keeps a clean look under the bumper while protecting against corrosion and wear.

Specs

Receiver Dimensions

  • Receiver opening: 1-1/4" x 1-1/4"

Weight and Capacity

  • Rating: Class II
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs

Warranty

  • Limited lifetime warranty

12188 Curt Class 2 Trailer Hitch Receiver

Similar to Draw-Tite 36660

Installation Details C12188 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.9

91 reviews
Review sort icon
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

Super easy to install, watched a [installation] video that etrailer made and after locating the right socket wrench it actually took 15 minutes for 2 people to install



by:

Perfect fit, little effort to install.
Directions
for the trailer harness were easy to follow for a do it "yourselfer" if that's a word, I've purchased here in the past and had absolutely no issues with any product. Customer service is second to none IMO.



by:

Perfect hitch from the perfect .com retailer. Great online support with outstanding installation videos. Fast order acknowledgement, fast shipping and outstanding packaging. I have been a customer since the beginning. Every car I own gets a hitch. Always consistent low price and outstanding service. Service that no other retailer has seemed to grasp. Perfect blend of people and automation.



by:

Sturdy construction, easy to follow instructions. Installation went smoothly.

Gary profile picture

Gary

6/30/2019

Works great install was a snap everything lined up perfectly instructions were detailed enough even for a idiot.



by:

The price was the lowest I found, the shipping cost at $0 could not be beat by anyone else, and the installation video made attaching the trailer hitch to my Ecosport super easy.



by:

We were very happy to find a hitch for our new car that we could put on ourselves. We will be purchasing a bike rack soon. We hope to bring our bikes on our next vacation. The website exceeded our expectations with many different types of bike racks and other accessories that will work with our new hitch. We also liked the product videos! We would definitely buy from etrailer.com again!



by:

The process of getting this hitch has been the easiest online order that I have done. Web site is very informative, the details of the order were updated regularly, and the package arrived earlier then promised. Will definitely order all my trailer needs from here again

Leonard profile picture

Leonard

8/15/2021

The hitch originally started with a 1 1/4 receiver but has been changed to a 2 receiver. the original mounting still looks and is holding up perfectly.



by:

When I got my hitch it did not fit. It was about an inch or more too short where the bolts screw in. I thought my 2018 ecosport had a design change. After puzzling over this for a while I noticed the brackets on the hitch were each bent inward. When I straightened them up the hitch fit fine. Other than that it was easy to install.

Sierra K. profile picture

Sierra K.

6/30/2021

Thank you for your review. I am glad that you got the flex figured out! Here is an article about it:



by:

Product worked perfect just as the description stated. The install was very easy. Very satisfied with Curt Trailer Hitch, Highly recommend

Denise profile picture

Denise

8/12/2024

Worked out perfect to add spare tire to my small car that had no space for a spare



by:

Easy install. Took less than 15 minutes. This item was installed on a 22 ecosport titanium. There was no plastic piece to remove on my vehicle so I only had to remove the exhaust clip and place back together. Easy. I did solo using a tow strap to hang the exhaust

Anthony profile picture

Anthony

1/1/2025

Product is still in great shape with no signs of rust.



by:

A OK NO PROBLEMS INSTALLING OK.



by:

From the time I jacked the car up it was about 1-1/2 hours to install the hitch. (not bad for a 71 yr. old man) Will use the hitch for my bike rack, the hitch looks good on are Eco Sport the main reason I bought from etrailer was the video of instillation of this product, a company that will take the time to make helpful videos sold me on their product. Thank You

Kurwin profile picture

Kurwin

8/9/2021

GREAT GREAT GREAT and GREAT again



by:

Perfect fit, Fast shipping, very good packaged, im satisfied.!! The installing was pretty simple!



by:

Great price, fast shipping, easy to ins tall.



by:

Great products and customer service got me going on riding dirt bikes. Thanks guys



by:

Fairly easy installation and functions well. Template for trimming plastic under bumper is not correct.



by:

This was super easy to install and I have towed my trailer many times with it. Everything I have ever bought from etrailer is perfect. I will always buy from them.



by:

Fit perfect



by:

The hitch was for a 2018 Ford EcoSport SES. The hitch was easy to install and looks good. The wire connector also looks good.



by:

Excellent product,bolted right up



by:

Just received this so haven't had it installed yet but no doubt it will do the job. The one thing I wanted to comment on is how fast I received this and the notifications through the order. Very nice.



by:

Trailer hitch it's self was great although the wiring harness was not did not work from beginning I tried returning with no success got no help from customer service very disappointed



by:

Started local hitch installer who couldn't do job in my timeframe. So, I started over, discovered etrailer, ordered hitch, received in 2 days by a normal UPS, and installed by another outfit in time for my trip -- for 1/2 the original quote! etrailer was a great find.



by:

Hitch works well. Took a few hours due to the car being an 18 and rusty. Instructions on hitch were missing info that the one bolt it comes with is larger than 15mm. It's 19mm I think. Anyway, it works well. I took it on a test drive and it did everything as expected.



by:

Arrived in a damaged box, but the packing protected the receiver.Installation when off without a hitch (pin intended).


25
25

See what our Experts say about this CURT Trailer Hitch

  • Correct Trailer Hitch Fitment for a 2018 Ford EcoSport
    Hey Harry, thanks for reaching out! The Curt Trailer Hitch Receiver # C12188 is a custom fit installation for your 2018 Ford EcoSport and has holes in the mounting brackets that match up to the holes in your vehicle frame for a no-drill installation. We don't carry the Reese Multi-Fit Hitch 37042 you referenced, but generally speaking these multi-fit hitches are either for pickups or for older vehicles and even at that they usually require some modification of the hitch or the vehicle...
    view full answer...
  • Can A 2019 Ford Ecosport Carry A 500 lb Haul Master Carrier And A Mobility Scooter?
    Hey David, thanks for reaching out. I hate to be the bearer of bad news, but unfortunately, a 2019 Ford EcoSport just isn't built to carry that kind of load on a hitch-mounted carrier. The only hitch available is the Curt # C12188, and while it has a 350 lb tongue weight rating, that isn't enough for a 500 lb carrier, let alone the combined weight of the carrier and your Axis Trackchair. There isn't a higher-capacity hitch available for the EcoSport, so there isn't a safe hitch-mounted...
    view full answer...
  • Will Curt Hitch Fit 2018 Ford EcoSport With Muffler Parallel To Bumper
    Hey Roland! The Curt Trailer Hitch # C12188 will still fit your 2018 Ford EcoSport with the different muffler orientation. That will not interfere with the installation of the hitch. This isn't uncommon and is typically seen on different trim packages. If it was an issue there would be an exclusion, but this hitch fits all models. What will you be using the hitch for?
    view full answer...
  • Are There Cargo Carriers that Can Fit 1-1/4 inch Hitches
    We do have cargo carriers that fit the 1-1/4 inch hitch size like with the Reese part # 63155 which would work great in a Class I hitch that fits your 2019 Ford EcoSport like the Curt # C12188.
    view full answer...
  • Comparing Curt and Draw-Tite Trailer Hitch Receivers For 2021 Ford EcoSport
    You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt # C12188 and Draw-Tite # 36660. First things first these hitches are very similar as they both share a similar design meaning they have roughly the same installation difficulty. Both hitches have a 1-1/4" receiver opening, and both also have the same 350lb tongue weight and 3,500lb trailer weight rating. With that said I recommend going with the Draw-Tite # 36660 due to it not requiring...
    view full answer...
  • Comparing Draw-Tite and Curt Trailer Hitches for 2020 Ford EcoSport
    That is a good question and as is the case with many vehicles, the trailer hitches that fit the 2020 Ford EcoSport are similar to the point where there is little differentiating them. Both the Draw-Tite Trailer Hitch # 36660 and Curt Trailer Hitch # C12188 are a fit for your '20 EcoSport and have the same 3,500 lb towing capacity, 350 lb tongue weight capacity and even install the same way. Each hitch is a bolt-on installation that does not require any type of drilling to install on your...
    view full answer...
  • What is the Difference Between the Curt # C12188 and the Draw-Tite # 36660 for My 2021 Ford EcoSport
    The main difference between the Curt Hitch # C12188 and the Draw-Tite Hitch # 36660 for your 2021 Ford EcoSport is that the Curt is assembled here in the United States while the Draw-Tite is installed overseas. Other than that difference, there are a lot of similarities. Both of these 1-1/4 inch hitches have a 350 pound maximum tongue weight and a 3,500 pound maximum gross towing weight capacity. Also, both of the installation processes include minor fascia trimming. When taking these...
    view full answer...
  • Recommended Hitch for a 2020 Ford EcoSport
    ¡Hola, Joanherm! El enganche Curt n.º de artículo C12188 es la única opción disponible para tu Ford EcoSport 2020. Se trata de un enganche de clase II con un receptor de 1-1/4 pulgadas. Consulté con nuestros proveedores y no existen opciones con receptor de 2 pulgadas para tu SUV subcompacto. El enganche Curt n.º de artículo C12188 está diseñado a medida para tu EcoSport e incluye todo el hardware necesario para su instalación. Cuenta con una capacidad de remolque de 3,500 libras y un...
    view full answer...
  • Wiring Harness that Does Not Require Splicing for a 2021 Ford EcoSport
    I would be happy to help you. I'll start out by confirming that the Curt Trailer Hitch Receiver item # C12188 you were looking at is a confirmed fit for your 2021 Ford EcoSport. I have linked an installation video so you can follow along and see the final product. For a wiring harness you will want the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT. This harness does not require any cutting or splicing of wires....
    view full answer...
  • Hitch for 2021 Ford EcoSport to Tow Smaller Trailer
    Yes we do have a hitch for your 2021 Ford EcoSport with the Curt hitch part # C12188 which is mostly hidden and has the best towing capacities. I attached an install video for it for you to check out as well. If you need trailer wiring too the Curt harness # C59496 would work great. I attached an install video for this on a similar EcoSport for you to check out as well.
    view full answer...
  • What is the Difference between the Curt C12188 and the Draw-Tite # 36660 for My 2021 Ford EcoSport?
    You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt # C12188 and Draw-Tite # 36660. These hitches are very similar as they both share a similar design meaning they have roughly the same installation difficulty. Both hitches have a 1-1/4" receiver opening, and both also have the same 350lb tongue weight and 3,500lb trailer weight rating. With that said I recommend going with the Draw-Tite # 36660 due to it not requiring an stabilization...
    view full answer...
  • Recommended Hitch And Wiring For A 2021 Ford EcoSport Towing A Small Trailer
    To get your 2021 Ford EcoSport set up to tow a small trailer, I recommend starting with the Curt # C12188. This is a very quick and easy install and shouldn't take more than about 30 minutes to complete. This is an American made hitch that will give you a Class II capacity ( 3,500 pounds towing and 350 pounds of tongue weight), but you will need to check your owner's manual for your vehicle capacities. I do need to mention that the lower fascia panel on 2.0L models will need to be removed...
    view full answer...
  • What Hitch Receiver Do You Recommend for My 2021 Ford EcoSport for Towing a Small Trailer?
    For a great hitch that will be able to accommodate a small trailer on your 2021 Ford EcoSport, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12188. The Curt hitch will provide your vehicle with up to 3,500 pounds of gross tow weight capacity and is manufactured in the U.S.A. For brake light and turn signal functionality, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. The Curt connector installs directly to...
    view full answer...
  • Is 7-way Connector Needed For Towing Tear Camper With Electric Trailer Brakes W/ 2019 Ford Ecosport?
    Even with a wireless brake controller like the Curt Echo Wireless # C51180 or the Autowbrake controller # 3430001 will require a 7-way connector to be installed on your 2019 Ford Ecosport to control your Tear Campers trailer brakes. I recommend going with the Curt Echo Wireless and the 7-way Connector # ETBC7L as it will be the easiest to get installed, while still being a very reliable option. To get this installed you will first need to install a 4-way connector using the Curt Powered...
    view full answer...
  • Trailer Hitch Sizes Available for a 2018 Ford EcoSport
    There are two trailer hitch options available for a 2018 Ford EcoSport, the Curt Trailer Hitch Receiver part # C12188 and the Draw-Tite Trailer Hitch Receiver part # 36660 which both have a 1-1/4" receiver tube openings. Therefore, they do not offer a trailer hitch for a 2018 Ford EcoSport with 2" receiver tube opening. However, you can obtain a 2" receiver tube opening with an adapter like the Hitch Expander Adapter part # 80303 but keep in mind these reduce your tongue weight capacity...
    view full answer...
  • Comparing the Curt and Draw-Tite Trailer Hitches for Bike Rack on a 2021 Ford EcoSport
    The Curt Trailer Hitch # C12188 and Draw-Tite Trailer Hitch # 36660 that fit your 2021 Ford EcoSport have the same design and weight ratings so the biggest difference is that the Curt has a thicker powder coat so it will do a better job at resisting damage from any road debris and the elements. If you don't already have a bike rack then I recommend checking out the Kuat Transfer V2 # KU74FR because of the ease of use and the unique U-Shaped frame that helps make loading/unloading your...
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver Availability for a 2018 Ford EcoSport
    They do not make a class III trailer hitch receiver for your 2018 Ford EcoSport. Instead, you will need to choose from either the Draw-Tite Trailer Hitch Receiver part # 36660 or the Curt Trailer Hitch Receiver part # C12188 which both have a class II rating with a 1-1/4" receiver tube opening. I prefer the Draw-Tite Trailer Hitch Receiver as it is more cost effective and will not require the use of a support strap like part # 18050 for non-towing accessories. If you can tell me what you...
    view full answer...
  • Does Curt 12188 Come with Hardware?
    Hey Derek! Yes, the Curt Trailer Hitch Receiver # C12188 includes all of the hardware necessary for installation. I've linked the instruction manual below so that you can confirm you have all of the tools if you plan to do the install yourself. What are you planning on carrying with your 2020 Ford EcoSport?
    view full answer...
  • Trailer Hitch For A 2021 Ford Ecosport
    The Curt Trailer Hitch Receiver # C12188 has a tongue weight up to 350 pounds. Using a 2 inch adapter will cut the tongue weight in half making the new tongue weight being 175 pounds. I would recommend trying to find a trailer that can use a class 2 1-1/4 inch by 1-1/4 inch. But you will not be able to safely haul a two inch motorcycle hauler because it will be way over the 175 pounds if you use a 2 inch adapter. The Upgraded Modulite Vehicle Wiring Harness Kit # C59496 will make it...
    view full answer...
  • Hitch-Mount Trike Carrier for 1-1/4-Inch Class II Hitch
    I understand your predicament, having a hitch and hitch bike rack that will not work together. Smaller vehicles typically accept smaller hitches, and for your 2018 Ford EcoSport compact SUV only 1-1/4-inch Class II hitches are offered since the car itself cannot handle the load that a 2-inch Class III hitch typically can. We offer 1-1/4-inch Draw-Tite # 36660 and Curt # C12188 hitches both of which are rated for 350-lbs of tongue weight. Hitch adapters like # HTAD, # HT5R, and # C45785...
    view full answer...
  • Will PortablePET Twistep Fit Curt Hitch # C12188
    Hey Amy, yes the PortablePET Twistep part # HE3052 will fit in the Curt hitch part # C12188. What kind of dog do you have?
    view full answer...


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B
Employee Eric H
Updated by:
Eric H
Employee Ronnie R
Written by:
Ronnie R
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Jonathan Y
Video by:
Jonathan Y
Employee Daniel D
Video by:
Daniel D

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924