Can A 2019 Ford Ecosport Carry A 500 lb Haul Master Carrier And A Mobility Scooter?
Updated 08/06/2026 | Published 07/30/2026 >
Question:
I own a 2019 Ford Ecosport and have a Haul-Master 500 Lbs. Mobility Wheelchair and Scooter Carrier that I need to haul my Axis Trackchair with. I see that I can only use a class II rated trailer hitch but that has a 300+- lb tongue weight. What can I use?
asked by: David T
Expert Reply:
Hey David, thanks for reaching out. I hate to be the bearer of bad news, but unfortunately, a 2019 Ford EcoSport just isn't built to carry that kind of load on a hitch-mounted carrier. The only hitch available is the Curt # C12188, and while it has a 350 lb tongue weight rating, that isn't enough for a 500 lb carrier, let alone the combined weight of the carrier and your Axis Trackchair.
There isn't a higher-capacity hitch available for the EcoSport, so there isn't a safe hitch-mounted solution for this application. The best option is a different vehicle equipped with a Class III or higher hitch that has enough tongue weight capacity to support both the carrier and the Trackchair. That's or pick up a small trailer you can use to haul the Trackchair.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- For Towing
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What Color is the Black Fade Replacement Fabric for etrailer Powered RV Awning e96QV When Rolled Up?
- Q&A: Comparing Curt and Draw-Tite Trailer Hitch Receivers For 2021 Ford EcoSport
- Q&A: What Size Are The Supplied Bolts For The Curt Hitch item # C1221?
- Q&A: Availability Of 5 on 4-1/2" Hubs For A 3/4" Spindle
- Q&A: Recommended Hitch And Wiring For A 2021 Ford EcoSport Towing A Small Trailer
- Q&A: Correct Trailer Hitch Fitment for a 2018 Ford EcoSport
- Q&A: Wiring Harness that Does Not Require Splicing for a 2021 Ford EcoSport
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Which Hitches are Made in the USA
- Article: Carrying on a Legacy: One Family’s Story of Grief, Growth, and a Global Pandemic
- Article: Trailer Hitch Installation Tips


Joseph
8/5/2026
We have a 2018 Ecosport with this hitch. I put an adaptor that goes in the 1 1/4 hole and comes out with a 2" hole that I then put in a 2" piece with a 2" ball. Last week I towed my 500 lb. trailer 75 miles, bought a 550 lb. motorcycle and towed that back 75 miles. It's probably not ok to do that but it works.