To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
I ordered my hitch and got it quickly. Unfortunatl the UPS guy dropped my box and ripped it open losing some of the fasteners. etrailer is sending replacments. They may want to tape the bag of fasteners to the hitch like they did the wiring and receiver.
Over all I am happy with the hitch fit I wish there was a place to
Mount the the harness plug other than zip ties a little concern about
The exhaust hitting the hitch and rattling I was an easy install and
Tucks under the bumper nicely for an inexpensive alternative the
To the oem hitch and harness
I was surprised at the amount of time it took to get the hitch I ordered. I ordered it on a Saturday got it on Wednesday. The really surprising part was the ease of which it was to install. I ordered the light kit with it. The hitch arrived at 5:15 pm and my son and I started the install we took a break for supper and finished at 6:30 pm.
The last hitch I installed was many years ago and that was a nightmare. I would order from this company if I ever needed another hitch in a New York minute.
Piece of cake installtion. It took about 45 minutes. I would recommend using 24" thick 175 lbs. zip ties. I used one on each end and routed them through the bolt hole and frame hole to lift the hitch up close to the bolt holes. Helped line up each side then placed one bolt in center and did the other side. Easy peezy!
Good product, great price, quick shippi ng!
Love Curt products and I am loyal to the brand for every vehicle. Not sure whether this issue is Honda, Curt or something else for these Gen 1 Ridgelines but I didn’t enjoy this install. Encountered the “all holes don’t line up” issue. There are enough attachment points (center and two sides) and it’s a solid Curt product. In 2025 for the 06-14 Gen 1 I would recommend OEM new or used for the Gen 1 due to age. Weird one but will always go with Curt otherwise. Was easy to drill in and tap to add 7 pin oem harness.
Just as advertised. Minor shipping damage, the center tab went through be box. Read other reviews saying the hitch was bent in shipping and was a concern. Mine was not, easily fit in place even around the muffler. 2 people make it simple. Bolted in just as expected.
Super easy install. Perfect fit. I used two Jack stands to hold in place and get bolts started. Make sure you have a 10-12” extension and maybe a 1-2” extension for the center bolts.
Overall very good, and easy to install! Two (small) items.
1 - I could not use the bolt for re-hanging the muffler support. The hitch is mounted properly, but the bolt hangs way too low to use the existing support. I am able to use the original support bolts however.
2 - More my fault, but I was not aware a Pin was not included. This actually worked out as I was able to buy a locking pin.
It looks great, the wiring was very easy and the on line videos on Youtube were extremely helpful and accurate! Seems like a great product, very good proactive reaching out on your part, and I would recommend you all to anyone! Thank you!
Robert Montoya
I purchased this hitch for my 2006 Honda Ridgeline to pull a small trailer to the coast.
I am very pleased with the customer service I got to help me select this hitch receiver as well and the mounting brackets, wiring harness, and adjustable ball mount. The installation videos were a great help and I actually was able to install it alone. Attached are pitctures of the completed installation and I think it looks great.
The hitch arrived on time and fit my 2006 Ridgeline perfectly. I was able to install it myself in 45 minutes. The hitch looks good and is almost totally hidden behind the bumper. This hitch replaced the Honda factory installed hitch that broke in half at one of the weld joints due to improper installation (the center bolts that fasten to the bumper frame had not been installed). When replacing the hitch is when I discovered that the factory hitch had no center weight support all these years. No wonder the weld joint fatigued and finally broke. The new hitch was bolted up properly with the included bolts and for the first time I have a solid hitch. Thank you etrailer.
Great product very strong, well made. The only complaint I have is that the frame tongues were bent in almost two inches. I wrapped them up in some old throw rugs and beat them back in place with a three pound sledge hammer. Took about 2 to 3 hours. Like I said strong. I towed a maxed out 6 by 12 UHaul,2000 miles no problem. They didn't have tourqe numbers for the bolts so I just put 150 on the big ones and 80 on the smaller ones. The wiring kit they offered was real good as well just remove the brake light plug it in and put it back together get plenty of wire zip ties ok.
Hitch was bent. I called customer service, and was told they make them with soft metal, and the solution is to bend it to fit. so my 30 min. installation turned in to 3 + hours. Final product looks good.
As described and fit vehicle perfect. One huge issue: corrosion in the bolt hole was so bad it took me forever to get the bolts secure. I started by using PB Blaster and wire Brush. I had to spray PB Blaster multiple times and run the bolts in as far as they would go then back them out. Then repeat gaining a little more depth each time.
I bought the Curt Trailer Hitch Receiver, wiring harness and ball mount for a 2006 Honda Ridgeline. The receiver fit perfectly. The installation instructions and videos were very well done. It took me about 2 hours to install everything, but because my vehicle is 10 years old about 45 minutes was spent cleaning the frame and existing threaded holes of dirt and rust. I don't normally write reviews but etrailer.com was so great with customer service and their product, I wanted to let them know that.
Jim A.
11/1/2017
I dont use the hitch all that much but it works fine.
Bought this Curt trailer hitch for my 2008 Ridgeline and couldn't be happier. I bought the hitch primarily to put a bike rack on my truck, but also to have the option to tow in the future. The hitch was super, super easy to install. I had two people help to hold it up on each end to get the bolts in. Everything lined up perfectly and total install time with a little was 15 mins. Great experience with etrailer, from ordering, order tracking, shipping and delivery.
Sean
6/16/2021
After one year, Im still thrilled with my Curt trailer hitch. No problems at all and its rock solid!
My 3rd Hitch in last 8 years from E-trailers. Tried to save money but 2 other sources failed in delivery and quality. This Hitch is much heavier built and fit perfectly. Installed by myself with help of a motorcycle jack. One from another source arrived without hardware and had one bracket welded 3/8" crooked. Would have never fit without modifications. My Ridgeline has a very tight area to fit. Still waiting on my refund from Walmart.com order. In the end, you get what you pay for.
David
10/18/2023
cannot go wrong with etrailer hitches. on my third and no issues installing or using it over this year.
Mike L.
11/9/2023
Ordered a drawtite hitch and when it arrived, it did not fit. Bolt holes an inch off on one side. So sent it back and ordered a Curt on my mechanics recommendation. It arrived on time and everything fit my truck perfectly. Easy to install. The only complaint would be on packaging, holes in both sides of box and corner crushed in. Maybe doubling up the corners and the area of the receiver and that would help. Overall very happy with the product, I would highly recommend the Curt hitch to everyone needing a hitch, avoid the drawtite.
Sierra K.
10/19/2021
It could have just been a case of flexed hitch with the Draw-tite receiver. Whatever the case, I am glad the Curt brand fits well.
Helpful Links
William
10/14/2022
The hitch is working as advertised! Very satisfied.
The product was fine. However, it arrived bent. It likely got bent during shipping and it wasn’t packaged well at all for something that is heavy and just getting tossed around with every other package. The packaging was just some cardboard wrapped around the steel hitch.
The hitch had toe-nailed in and so did not fit the truck. The sides had squeezed together so to speak. It took a while to rig a setup that I could bend it back and get it close to lining up with the car
Finding the right one to buy on your website was a breeze. Fitting a bent piece of steel to a car was not.
Mike L.
9/15/2022
When a trailer hitch is constructed, softer steel is used in the side plates as opposed to the harder steel used in the crossbar and receiver tube. This allows the hitch to flex along with the vehicle to a certain degree. This flexibility can also allow the hitch to get slightly bent out of position during shipping and handling. The good news is that its very easy to fix this if you know a few tricks as shown in the linked article.
Purchased hitch, wiring harness, and ball mount kit for Honda Ridgeline. Everything was shipped in 1 box. Printed directions were confusing. Watching online installation videos were great. They walked me step-by-step through the installation. Installing the hitch and wiring took about 3hrs which I thought was pretty good since I'd never installed a trailer hitch before.
IT WAS A PERFIT FIT!!
LOOKS GOOD TO!
Easy install; (just over an hour). Electrical harness was clean and looks like there will never be issues with it). The hitch and receiver worked perfectly and was a life saver while moving and doing some larger home projects. It (the hitch) is one of those items for your vehicle you don’t think about until you need it. This hitch and receiver are a no brainer at a competitive price.
I ordered my Hitch from Preston, he was very nice on the phone and handled my order fast and perfect.I got my hitch and wire harness very fast.I had the hitch installed in 40 minutes,it fit perfect!!. next was the wire harness,the installation was easy and fast.I had a question about it and the woman on the phone helped me figure out the problem I had.few minutes later it was finished.If you need any hitch,wire harness don't look anywhere else but this company. its very nice to find a true good service company. I will be telling my county about their great products.
I have a 2006 Ridgeline that I bought in 2005. It never had a trailer hitch receiver, so the weld nuts had a lot of corrosion on them. I spent probably an hour cleaning them with lots of spray lubricant and a wire brush for 3/8 copper pipe. Time well spent. It took my son and myself 15 minutes to install Perfect fit.
Thanks CURT TRAILER & ETRAILER.COM.
Dave T
Hitch arrived timely and in good condition. Installation was made easy, thanks to the video that accompanies the order. Purchased light kit as well and that was just as easy to install, again , thanks to the video. Highly recommend products from this site and prices are great!
Thanks again for the new hitch and lights!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gabe
9/26/2014
Awesome tip, thanks!!