bing tracking image
  1. Fifth Wheel Hitch
  2. Ford
  3. F-350 Super Duty
  4. 2004
  5. B and W
B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs

B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs

Item # BWRVK3400-5W
Our Price: $1,599.00
Fifth Wheel Hitch
This item qualifies for Free Truck Freight Shipping
Shipping Weight: 277 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Ford fifth wheel hitch experts, and offer a great price. etrailer.com carries a complete line of B and W products for your Ford F-350 Super Duty 2004. B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs part BWRVK3400-5W from B and W can be ordered online at etrailer.com. Complete fifth wheel hitch installation instructions and technical support.
  • All Info
  • Reviews (3819)
  • Q & A (0)
  • Photos

B and W Fifth Wheel Hitch - BWRVK3400-5W

  • Sliding Fifth Wheel
  • B and W
  • Aftermarket Below Bed Rails
  • 20000 lbs GTW
  • Standard - Double Jaw
  • Double Pivot
  • 12 Inch Fore/Aft Travel
  • 5000 lbs Vertical Load
  • 17 - 19 Inch Tall

The built-in slider on this sturdy 5th-wheel hitch helps eliminate clearance concerns during slow-speed turns. Dual jaws offer excellent jaw-to-king-pin contact. Hitch removes easily for full bed access.


Features:

  • 5th-Wheel hitch mounts in your truck bed so you can tow your 5th-wheel trailer
  • Built-in slider provides clearance required for your short-bed pickup to turn safely at slow speeds
  • Rail-free design allows for full access to truck bed when hitch is removed
  • 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact
    • Less rattle and more security than slide-bar jaws
  • Cam-action latching handle helps prevent binding
    • Simple to release, even on unlevel terrain
    • Lockable to secure trailer to hitch - padlock sold separately
  • Fully articulating head eases hookup and helps to limit chucking
    • Pivots front-to-back and side-to-side
  • 3 Height settings to fit your application
  • Quiet, rattle-free ride with polyurethane bushings
  • 2-Piece design for simple setup and removal
    • Hitch base with slider installs in truck bed
    • Hitch head secures to base
  • Gray powder coated steel is corrosion resistant
  • Custom B&W underbed mounting kit (sold separately) required for installation
  • Made in the USA


Specs:

  • Gross towing weight: 20,000 lbs
  • Vertical load limit: 5,000 lbs
  • Hitch height: 17" - 19"
  • Travel: 12" front to back
  • Limited limited warranty


Notes:

  • Due to the size of this item, it ships via freight.
  • This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.

Simple Removal for Full Bed Access

B&W Companion Simple Removal

With the Companion from B&W, you get a heavy-duty fifth-wheel trailer hitch that mounts in your truck bed by connecting directly to a custom underbed mounting kit (sold separately) with the included components. No modifications are required to your truck or trailer. And no additional parts are required for the system to work. When you're done towing, the entire hitch can be removed for complete bed access.


Quiet, Secure Ride

The 1" thick jaw on the Companion is precision machined to provide a tight, sturdy connection. And unlike slide-bar models, the rounded 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.


B&W Companion Bushings

In addition to the sturdy jaw, the Companion has durable polyurethane bushings built in to provide a smoother, more comfortable towing experience. These bushings sit on top of the pivot arms that support the fifth-wheel head. Because the head is resting on a padded area, it is able to pivot without clanking. The ability of the head to pivot - both front to back and side to side - along with the trailer also helps to limit the chucking that may occur with a more static hitch.


Non-Binding Latch Handle

The dual jaw on the Companion is operated by a simple-to-use cam-action handle. This handle allows you to quickly and easily release the jaws on the hitch, even if you are on uneven terrain. If any binding does occur between your truck and trailer, the jaws may remain closed after you move the handle to the open position. But because the handle is unlatched, there is nothing keeping the jaws closed except for the binding pressure. Therefore, simply driving your truck forward will be enough to force the jaws to open.


The cam-action handle is held in the closed position with the included pin and clip. For extra security, you can replace the pin with a sturdy padlock. The shackle on the lock you choose should have a diameter of 5/16", height of 3", and a width of 2-1/4".


Built-In Slider

Most often used on trucks with 6' beds, a slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.


The slider that is built into the base of the Companion allows for 12" of fore and aft travel to give you the clearance you need.


Assembly of the B&W Companion

The Companion's pivot arms are what allow the hitch to be adjusted front to back as well as up and down for optimal positioning. As a result, this hitch can accommodate the height of your trailer and also help to give you some additional cab clearance. To adjust either the height of the hitch or the fore/aft positioning, just attach the hitch's pivot arms in the desired location on the base.


The hitch head installs on top of the pivot arms. When you have the head in position, simply secure it to the arms with the included pins.



RVK3405 B and W Companion Slider Fifth Wheel RV Hitch

Installation Details BWRVK3400-5W Installation instructionsAlternate Instructions BWRVK3400-5W Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs - BWRVK3400-5W

Average Customer Rating:  4.8 out of 5 stars   (3819 Customer Reviews)

The built-in slider on this sturdy 5th-wheel hitch helps eliminate clearance concerns during slow-speed turns. Dual jaws offer excellent jaw-to-king-pin contact. Hitch removes easily for full bed access.

by:

Extremely easy install. You will need a torque wrench that’ll go up to 110 ft/lbs. glad I did my research and went with the B&w gooseneck hitch in anticipation of getting this 5th wheel companion hitch at a later time.



by:

Fast shipping and the box was in perfect condition. I appreciate the amazing customer service. They were friendly and had a good attitude when I called with questions. I look forward to shopping with them in the future. The shipping company called ahead of time and scheduled the delivery because it was such a large item they were friendly and was within their timeframe. Thank you etrailer.com I appreciate it.



by:

Really like this unit with the slide option. With the under the bed option it is also nice that I can remove it and have full bed access. The slide is great as maneuvering is improved significantly without worry of hitting your cab. Assembly is simple. It is heavy so be prepared when installing to have some help but can be handled pretty easily.



by:

Outstanding product! Purchased for a 2020 Dodge Ram 2500 w/6.4L Hemi. It took my wife & I about 8 hours to install & everything went together nicely. ~2 hour delay because I wasn’t paying attention & installed the base backwards & had to build a gantry to lift it out. I definitely recommend greasing the round hitch receiver in the bed floor & the square hitch in the base before installing to make removal easier. I recommend the product & looking forward to years of goose neck & 5th wheel hitch use.



by:

This hitch is one fine piece of equipment. Instructions were perfectly detailed and if that's not enough there are videos to guide you. Installed in 4 hours with no problems. Haven't gone anywhere yet but did hook up to camper and was impressed. 2017 Ram 2500 Short Bed

Tim

3/19/2019

I’m still very impressed with this hitch no problems and no slop



by:

This hitch works extremely well. The slide is nice if you get into any tight cornering situations. The hitch top and base separate making it a bit easier to mount and unmount.The lock washer used with the mounting bolt that draws up against the gooseneck pin broke on the 2nd use. I had 2 different torque wrenches set to 79 lbs that I tested the bolt with. Unsure why it broke. But overall we love this hitch and we pull a 38f 5ver without issue. Very smooth ride.



by:

There is a slapping noise or a bumping coming from the fifth wheel can't seem to find it and I don't know if something is wearing out been finding metal shaving in the bed not big one's but enough to concern me though maybe you might have some insight about this?
This starting happening about 6 months of Use.

Etrailer Expert

Jenny N.

11/2/2023

To be honest we have not had reports where there have been metal shavings coming from the hitch. B & W will be in contact with you to determine what is exactly happening.



by:

Works great. Love the slide feature. Let's me move the clack back so I can fuel up the generator without needing to unhook. Coach just floates behind truck with this hitch. Super simple to hookup and unhook as well.



by:

Too heavy for one person to install unless you did what I had to do (alone without any help). Removed the bolt from the tailgate end of the roller tubes, pulled the tubes out and separated the upper assemble from the lower bed contact assembly. Doing that allowed me to lift each piece into the bed without tracking down a neighbor.



by:

We bought a 30-foot 5th wheel that came with an Andersen Ultimate hitch. Tow vehicle is an F250 short bed. After setting up the rig with the Andersen, I wasn't satisfied with the clearances, both cab and bed. Since the turn-over ball was already installed, this hitch was perfect for going to the traditional 5th wheel hitch and it solved all of my clearance concerns.



by:

Great for short beds, I can back into spaces or get myself out of smaller than expected gas stations with no worry if contacting with the trailer. For sure recommend and also being able to visual see when the hitch is properly closed on the pin is always great.



by:

Install was not that complicated. Use it to pull 41’ 5th wheel. Slider sure comes in handy



by:

Excellent experience all the way around! From customer service to sales all the way to will call. Product was easy to install and works excellent.



by:

We have towed a 5th wheel camping trailer over 5,000 miles so far with the BW hitch with no problems. We find it easy to hitch up and go. Very happy with this 5th wheel hitch.



by:

Was as described very heavy, I would have given 5 stars but after installing I tried to take up. Not gonna happen unless I have some kind of hoist.

Dennis A.

2/3/2020

Very Good, just wish I had got without slider as never use this part. When I tried to use it it would the fifth wheel would hit to of tail gate. I have no problem at cab of truck when forward. E trailer is my first choice when I make a purchase for my truck.



by:

Very happy with the quality



by:

Great customer service! The phone only rang twice when I called in regarding my order before a human being picked up who was knowledgeable and kind. It was like I was back in time before automated robots became mainstream and American jobs were outsourced. Earned my business, will come back for more.



by:

Great product that is well build and very easy to install. Only took me a short time to install and the product arrived at my house with no issues. Only thing to consider with this product is that it is heavy to consider that when handling it.



by:

Just started 5th wheel camping and wanted a hitch that when removed left my truck box bare. I also talked to alot of people who talked about clunking and noise from their hitch while towing. I bought a 2013 32' Coachman which is pushing my 2009 F150 to its max. When pulling with this hitch it feels like the truck and trailer are one unit. No noise and no slop between the two units. I made a lifting pin that goes into the jaws and lifts it out with a comealong hooked to a rafter support in my garage. I then put it onto a wheel cart I made. No heavy lifting and one person can do it all. I've had one teflon foot fall of the hitch and the service was amazing no questions, no pictures, and no waiting. New piece was sent right away. Anyone who tows now and has looked at the hit are very impressed. I would definitly recomend this hitch to everyone.

Dale F.

12/23/2019

Every thing has been working good. Seems to take a good jolt to get it to slide with the trailer attached. Still a great product



by:

I've had this for about a year. Only have about 2,000 miles of use with a 13,000 lbs 5th wheel travel trailer.
It is still like new. Jaws are tight, no rattles with or without the trailer attached.
I use a nylon guide plate, to keep things clean.

The only issue is the slider will not unlatch from the locked position with the trailer attached.
Unlatch and slides fine when not loaded.
Just haven't made the time to talk to B&W about this.
The base is a heavy bugger, and fits snug in the receptical. I've lifted it in and out myself, but not a smart idea.

Overall I would buy again. For our use, where we need the whole bed the majority of time it is an easy solution.

Etrailer Expert

Mike L.

2/27/2019

Youll want to make sure that the slider rails are lubricated. Also keep in mind that if the truck and trailer are at different angles and theres a lot of pressure placed on the sliding mechanism, it can bind.

Tracey H.

4/5/2020

A year later, and it still works the same. Slider still doesnt work. but havent needed it. One thing I have learned is to make sure the lug from the attachment is lubricated before placed into the receiver. After about 8 months of being in the bed, I tried to remove it. Whoah! That was a son of a gun. Finally got it to break free, and then it lifted out. both the lug of the companion hitch, and the receiver of the B&W are nicely powder coated. that powder coating locked together. Nothing patience and a pry bar couldnt fix. But I dont want a repeat. Over all, I may look at something easier for our next travel season.



by:

Very well built and heavy duty. Great videos on how to set it up are available through etrailer as well.



by:

Well built product. Great craftsmanship. Not cheap, but you know why when you see it. Safety is a must, not worth skipping out on a lower grade hitch



by:

This this is heavy and strong. The only thing that did not meet my expectation is the draw down bolt prevents the hitch from being removed by simply opening the gooseneck locking pin. But the drawdown bolt keeps this hitch quite in the bed and tight, no rattling when unloaded! Great product and customer support!

Tim

1/17/2022

After a year of use this is still an outstanding hitch. It is sturdy and solid. No issues at all. Very pleased with my purchase.



by:

The hitch works great and the slider has got me in and out of a couple of tight places that I have found myself in. The hitch is heavy and takes up a lot of real estate in my bed but I don’t think that’s a bad thing when pulling a 15k 40ft 5th wheel. Easy to operate and locks up tight and secure. Great product as expected.

Syd C.

3/14/2021

Still works great. Have taken quite a few trips around my state and a nice trip to the beach. This hitch has allowed me to get into places that I shouldn’t and get out of those place I dang sure shouldn’t have tried to fit.



by:

Excellent hitch. If your truck doesn't come with factory 5th wheel hitch prep, the combination of the turnover ball and this hitch works like a charm. Easy to connect to truck and disconnect. Towed for hundreds of miles. Highly recommend.

Joe G

6/7/2021

Great ProductWorks great with our 5th wheel. Very easy to connect and disconnect. Love it.


25
3683
Show More Reviews

See what our Experts say about this B and W Fifth Wheel Hitch

  • Will B&W Patriot 5th Wheel Hitch Provide Enough Turning Clearance in 2004 Ford F-250 Short Bed
    For a short bed truck like your 2004 Ford F-250 to tow a 5th wheel and still give you reasonable turning clearance you need either a 12-inch sliding hitch like the B&W Companion # BWRVK3400-5W and matching install kit # BWGNRK1108-5W, OR you will need to replace your existing pin box with a Sidewinder pin box and use a fixed hitch. A Sidewinder provides 22-inches of additional turning clearance by moving the pivot point for the trailer back from the hitch head to the rear of the pin box. The...
    view full answer...
  • LoadLifter 5000 Compatibility With Reese Underbed Rail Kit On A 2006 Ford F-250
    You can install a 5th wheel hitch with your AirLift LoadLifter 5000 air bags but the frame brackets on the 5th wheel installation kit part # RP30073 will interfere with the mounting location on the AirLift part # AL57212. Therefore, it is not compatible with the Reese Under Bed Rail Kit part # RP30073 without further modifications that would void the warranty. The only 5th wheel option that will enable you to keep your current airbag setup entails the use of our Reese Universal Base Rails...
    view full answer...
  • Fifth Wheel Hitch with Below Bed Rails for 2016 Chevy Silverado 2500 with 6-1/2 Foot bed
    There is a very high quality option for you to install a fifth-wheel hitch with underbed rails on your 2016 Chevy Silverado 2500 with a 6-1/2 foot bed without the factory rail kit. I recommend the B&W Companion # BWRVK3400-5W, which installs with the Custom Underbed Installation Kit # BWGNRK1016-5W. The rails double as a Turnoverball gooseneck hitch, and the Companion, which has a capacity of 20,000 lbs, features jaws which are 1" thick and provide full 360 degree contact with your king...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Which Replacement Base For B&W Companion 5th Wheel Hitch BWRVK3400-5W To Make It Fixed Hitch
    The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs # BWRVK3500 you were looking at is actually the complete hitch. The replacement standard base for your B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs # BWRVK3400-5W you can use the Replacement Base for B&W Companion 5th Wheel Trailer Hitch - 20,000 lbs # BWRVB3500 which will convert your current hitch into a fixed hitch, and will allow you to reuse your current head assembly. Since...
    view full answer...
  • Availability of a B&W Companion 5th Wheel Hitch to Fit a Gooseneck Hitch with Round Mount
    The B&W Companion 5th Wheel Hitch, # BWRVK3400-5W, can only be installed on a 2006 Chevrolet Silverado by using the B&W Turnoverball Underbed Gooseneck Trailer Hitch, # BWGNRK1067. B&W does not have a Companion hitch that will fit the gooseneck hitch other than there own.
    view full answer...
  • Height Adjustment Provided by B&W Companion 5th Wheel Trailer Hitch BWRVK3400-5W
    The B&W Companion 5th Wheel Trailer Hitch # BWRVK3400-5W offers a height adjustment feature with a choice of 3 heights for the pivot arms, and it of course provides front-to-back slider travel of 12-inches. There pivot arms can be installed in either of 2 ways, one providing more forward clearance than the other. You may care to review the hitch's instructions which are linked for you, along with a review video.
    view full answer...
  • Gooseneck Hitch Fit for 2015 Chevrolet Silverado 1500 with 6-1/2-Foot Bed
    We can help you with a gooseneck hitch for your 2015 Chevrolet Silverado 1500 with 6-1/2-foot bed. All options are shown on the linked page. If you will not need to also tow 5th wheel trailers then I suggest the Draw-Tite # 9465-54. For wiring you can use part # C56000. But if you think there is a chance you'll also want to tow 5th wheels, then the goose neck kit I recommend is the B&W # BWGNRK1057. This is a complete goose neck hitch system, but it also serves as the mounting kit for...
    view full answer...
  • Recommended Under Bed Mounted 5th Wheel Hitch for 2020 Ford F-150 Short Bed w/o Tow Prep Package
    We have the perfect solution that would allow you to install a fifth wheel without using the permanently mounted bed rails like what are typically seen. The B&W Companion system is an extremely popular option because it actually uses their # BW77FR Turnover Ball gooseneck hitch as the under bed mount for attaching the # BWRVK3400-5W sliding hitch. A sliding fifth wheel hitch is recommended for 6-1/2 foot bed trucks to provide proper clearance between the front of the fifth wheel and the...
    view full answer...
  • Parts Needed To Convert a Companion 5th Wheel Hitch to Work in a 2021 Chevy Silverado 1500
    No, not without swapping out the base. The B&W Companion item # BWRVK3670 is set up for the Ram factory puck system which there isn't an option for a puck system on the 1/2 ton 2021 Chevy Trailboss. To set your Companion 5th wheel hitch up to work with a 2021 Chevy Silverado 1500 Trailboss you will need the following parts: Replacement Slider Base for B&W Companion Slider 5th Wheel Trailer Hitch item # BWRVB3405 B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation...
    view full answer...
  • Recommended B&W Gooseneck/5th Wheel Towing Set-up for 2015 Ram 2500
    A PullRite 5th wheel hitch made for industry-standard rails (ISRs) will not fit in the B&W Turnover Ball Gooseneck hitch/install kit. The B&W gooseneck kit that fits your 2015 Ram 2500 with 6-foot bed and no factory rail kit is part # BWGNRK1384-5W. This kit fits trucks with rear coil springs and it is compatible with the OEM air suspension system. With this installed you can tow your gooseneck trailers and when it's 5th wheel time simply drop in B&W's Companion Slider Hitch # BWRVK3400-5W...
    view full answer...
  • Which B&W Hitch For 2021 Ram 2500 Short Bed
    The B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider is a great hitch for those with short bed trucks. The # BWRVK3670 model is a confirmed fit for the 2021 Ram 2500 with the OEM Ram Towing Prep Package (the puck system). If you have the puck system in your truck, I suggest the B&W Companion, # BWRVK3670. If you do not have the OEM Ram Towing Prep Package, you can still use a B&W Companion model 5th Wheel Trailer Hitch w/ Slider rated for 20K but, you will need to use the # BWRVK3400-5W...
    view full answer...
  • B&W Turnover Gooseneck Hitch and Companion 5th Wheel Hitch for a 2022 Chevrolet Silverado 2500
    For your 2022 Chevrolet Silverado 2500 you will need the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1020-5W. B&W has confirmed that this will fit the 2022 model year without the factory puck system. This will let you install the B&W Companion 5th Wheel Trailer Hitch # BWRVK3400-5W and doubles as a heavy-duty Turnoverball gooseneck trailer hitch. You may also want the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # HM54FR. This...
    view full answer...
  • Recommended 5th Wheel Hitch For A 2023 Ford F-250 Super Duty
    You can only have one pivoting point between the trailer and tow vehicle so that means you'll have to decide between a slider hitch and locking out the Turning Point or getting a fixed hitch and using the Turning Point as a rotating pin box. The Turning point pin box is going to offer you almost twice as much turning clearance without you having to get out of the truck and place the hitch into the maneuvering position each time. Since you already have the Turning Point on your trailer you'd...
    view full answer...
  • Fifth Wheel And Gooseneck Hitch Recommendations for 2013 Dodge Ram 2500
    According to my contact at Air Lift, their # AL57295 air spring system utilizes brackets that mount to the underside of the frame member that won't interfere with the fifth wheel hitch install brackets. As long as the toolbox doesn't extend above the bed side rails of the truck, you should have no fit worries. A B&W Companion set up, consisting of the # BWGNRK1313-5W under bed rail kit and the # BWRVK3400-5W sliding fifth wheel hitch would be a great choice that would allow you lots...
    view full answer...
  • Fifth Wheel-to-Gooseneck Adapter For 2002 Dodge Ram 2500
    The best option available to you at this time is our adapter # CAB-C5GX1216. Also, from my research, you need to obtain a specific plate when using an adapter with your 7027 pin box.. I advise that while this part will meet your needs, you could have even more clearance while turning if you removed your gooseneck hitch in your truck bed and replaced it with a sliding fifth wheel hitch, such as the B&W Companion # BWRVK3400-5W and the underbed custom installation kit for your truck # BWGNRK1394-5W...
    view full answer...
  • Difference Between B&W BWRVK3400-5W and BWRVB3405
    The BWRVK3400-5W is the complete B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter and the # BWRVB3405 you referenced is just the slider base that does not include the head assembly. You would purchase the # BWRVB3405 if you already had a B&W Companion like the # BWRVK3500-5W and wanted to convert it to a slider. I included a video for the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3400-5W for you to take a look at.
    view full answer...
  • Recommended Under Bed 5th Wheel System for a 2023 Chevy Silverado 2500 w/out the Prep Package
    We have something similar but there is no way to put a factory prep package in your 2023 Chevy Silverado 2500. I recommend the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches item # BWGNRK1020-5W. This underbed system fits both the 6-3/4' and 8' bed lengths of the 2023 Silverado 2500. It has a 30,000 lbs capacity and provides you with a square gooseneck receiver capable of mounting a B&W Companion hitch in. There are two options for Companion 5th wheel hitches...
    view full answer...
  • Can The Head Of A B&W 5th Wheel Hitch Be Switched From A Sliding Base To A Fixed Base
    Yes, the hitch head of a B&W Patriot or Companion can be removed from a sliding base and installed on a fixed base. You'll just want to make sure that you choose the correct model for the base. If you have a Patriot # BWRVK3270 (base rail style) then you'll have to go with a Patriot base like part # BWRVB3255. If you have a Companion # BWRVK3400-5W (gooseneck style) then you'll need part # BWRVB3500. To remove the head you'll just need to pull the pin on each side of the hitch head that...
    view full answer...
  • Best Fifth Wheel Hitch Setup Recommendation for a 2012 Ram 3500 with B and W Turnover Ball
    That we are aware of there are no known horror stories from people using the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G on a fifth wheel trailer. As long as you stay under the 20k capacity that this adapter has and install it properly you would be fine. I attached a review video for you to check out as well. Another option you have since you have a B and W Turnover ball hitch part # BWGNRK1313-5W would be to use a B and W Companion Hitch like the # BWRVK3400-5W...
    view full answer...
  • Recommended 5th Wheel Hitch for a 2023 Chevy Silverado 2500 w/out the Factory Puck System
    If by standard bed you mean 6-3/4' then it is recommended to use a sliding hitch. There's no shortage of people who will tell you you don't need one. However, if you want to safely make tight turns and not have to worry about bashing the back of your cab you're going to want the extra clearance a slider provides. Unless your 2023 Chevy Silverado 2500 has the factory puck system you're going to need to install the B&W Turnoverball System item # BWGNRK1020-5W to have a empty bed when you...
    view full answer...
  • 5th Wheel Hitch Recommendation for 2016 Ram 3500 with 8-Foot Bed and No Factory Prep
    A long box Ram 3500 is a great choice for 5th wheel towing and we can get you set for pulling your 10K 5th wheel. The linked page shows all our options for fixed 5th wheel hitches for your truck without the factory hitch prep. If you'd like maximum towing flexibility along with excellent build quality and towing performance I recommend the B&W Companion system, parts # BWRVK3500-5W and # BWGNRK1314-5W. With this set-up you can pull both 5th wheel and goose neck trailers with one system...
    view full answer...
  • B&W Turnover Ball Gooseneck Hitch for 2005 Chevy Silverado 1500
    The B&W # GNRK1067 Turnover Ball is compatible with 3/4 and 1 ton GM trucks. for a 2005 Silverado 1500, you'd want to use # BWGNRK1059. If you'd like to install a 7-way trialer connector in the truck bed so you don't need to run the trailer connector wire up over the tailgate, you can use # C56000. I've linked to some product videos for the hitch and the wiring.
    view full answer...
  • Is an Under-Bed Mounted 5th Wheel Hitch Option Available for 2021 Chevy Silverado 1500
    By 'standard bed', I assume you're speaking of the 6-1/2 foot bed. If that isn't the case, please let me know. There isn't a puck system available that's like the OEM puck system offered on the 3/4 and 1 ton trucks, but we do offer a solution that might work for you that has the mount for the hitch install so it's under the bed which leaves the bed unobstructed. Once the hitch is removed, there'll just be a single hole in the truck bed which won't interfere with loading or unloading the...
    view full answer...
  • Can B&W Patriot Mount in 2015 GMC Sierra 3500HD That Has B&W Turnoverball Gooseneck
    The base of the B&W Companion # BWRVK3500-5W will not work with the B&W Patriot 5th Wheel Trailer Hitch # BWRVK3200 so the most economical option is to remove the B&W Turnoverball # BWGNRK1012-5W and replace it with rails. The correct base rails and installation kit for your 2015 GMC Sierra 3500HD are the B&W Custom Installation Kit w/ Base Rails # BWRVK2506; putting this kit in your truck will allow you to mount your B&W Patriot hitch. The best option, and the simplest, is actually something...
    view full answer...
    Image 1 for


< Previous
123. . .34



Do you have a question about this Fifth Wheel Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Jacob H
Test Fit:
Jacob H
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video by:
Dustin K
Employee Zach D
Video by:
Zach D
Employee Thomas T
Video by:
Thomas T
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Adele M
Updated by:
Adele M
Employee Kathleen M
Updated by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Noah M
Updated by:
Noah M
Employee Justice A
Updated by:
Justice A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.