A tonneau cover shouldn't mean removing your bike chocks every trip. This low-profile Moto-Chok fits under most covers while giving your bike the same secure starting point every time you load.
Not every truck bed has room for a tall chock, especially if you have a tonneau cover. This Low-Profile Moto-Chok keeps the front-wheel support lower in the bed while still giving full-size bikes the support they need without changing the way you load your bike.
This chock supports full-size dirt bikes, dual sports, adventure bikes, and most tire widths, giving the tire the support it needs without taking up extra room in the bed or trailer.
The Low-Profile Moto-Chok works well when bed space or cover clearance matters, but every hauling setup is different. Add a 22-Degree Adapter (ZT52FR) to create additional handlebar clearance or a Rise/Drop Plate (ZT25FR) to adjust chock height for your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer. Let's take a look at our Z-TRAK low profile motor chock bike chock. So folks, loading your motorcycle, dirt bike, dual sport, and adventure motorcycles can be a challenge, especially whenever you're trying to do it by yourself, and you really need a couple of hands to do it safely, right So this will help eliminate most of that battle, if not all of it. So this is the Z-TRAK low profile motor chock. And you combine this with sold separately a Z-TRAK that would go mount it to the back of the bed of your pickup truck right beneath the cab, or rather, right up front of the cab.
And again, that's sold separately as far as the Z-TRAK itself, and we carry them custom for each vehicle as far as pickup trucks. So make sure you're checking the fit guide to be sure you're getting the right one for your specific needs. And unlike traditional wheel chocks that require extra tie down tension, you don't need that with these. This will go right up in here with the wheel. This is a four-inch wide space in here.
This will hold that up in place, and now it's going to keep your bike from wanting to flip over. You got tie down points on both sides, and then you can attach these Z-TRAK tie down anchors with rings off to the sides. And then you could strap down your motorbike, dirt bike, whatnot, and easily hold it in place. You got three different height adjustments here on the Z-TRAK attachment point that's just loosely put together here today for your viewing pleasure. And as you know, E-TRAK, Z-TRAK, you just simply use that spring loaded lever, and then you could put this up and clip it down in place.
Easy to remove, easy to use. This is low profile, so it's not taking up a lot of space when it's installed. And if it is taking up any space that you don't want, no problem. Simply take it off. You can still close your tonneau cover.
You can still use the bed of your truck. That Z-TRAK, E-TRAK is maybe taking up an inch at most out of the front of the bed of your pickup. So it's a great option for you, in my opinion. And this is all powder coated, heavy duty steel. So you don't worry about rust, corrosion, or anything like that anytime soon. Now folks, this is just the single bike option, and we do carry the set of two. And we also carry a set of three with a middle extender. That way you can carry three bikes, and not hit each other's handlebar. So if you need more than one, check them out separately here at etrailer. I'm Steven. Thanks for your time, and have a good one.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.