Getting 2 bikes strapped down gets a whole lot easier with good front-wheel chocks. These Moto-Choks support the front tires while you secure the bikes, so every trip starts the same way and you're ready to get on the road sooner.
Getting both bikes secured is easier when they stay upright from the start. The Moto-Choks hold each bike in position while you secure it, making it easier to get the straps where you want them without balancing the bikes at the same time.
These standard chocks fit most front tires up to 4" wide, covering dirt bikes, dual sports, and adventure bikes. The optimized height and cradle depth give the tires plenty of support while making it easy to load the same bikes again and again.
The Moto-Choks handle most bikes on their own, but every hauling setup is different. Add a Low-Profile Moto-Chok (ZT79FR) if you're working around a tonneau cover or reduced bed depth, a 22-Degree Adapter (ZT52FR) to create additional handlebar clearance, or a Rise/Drop Plate (ZT25FR) to adjust chock height for your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer. Let's take a look at the Z-TRAK Moto-Chok for standard bikes. You're gonna get quantity two with four tie-down rings. So folks, with this set and your Z-TRAK, sold separately, that's custom fit for your vehicle, you can load two bikes the same way every time. You're gonna be able to hold the front wheels in place right where you want them while you secure down the bikes.
Now, this works, again, with that Z-TRAK, sold separately, and that's custom fit for your vehicle. But as you can see in the image, this is gonna do a great job at holding and cradling that tire. These do have a four-inch wide inside diameter and they are 17 inches tall overall. And as you can see, they both have these tie-downs on the sides where you can put, like, an S hook and then on the back you have the Z-TRAK connection. I just have this loosely hand tightened.
You do have three adjustment hole sets of two, so you could move this higher or lower depending on what your needs are in your particular vehicle. And then again, you get to match both of these tie-down rings, two for each chock. Those are gonna do a great job of giving you a great place on the side along that Z-TRAK to then have an anchor to put your strap hook onto as well. Heavy duty steel, great powder coat in black over the top. You don't have to worry about rust, corrosion, or anything like that anytime soon.
And again, these are compatible with Z-TRAK cargo rails and standard E-track as well. Now, we do sell these separately as well as individuals. You can get some extra ones if you need to. We also sell this in a set of three with an extender for your middle bike. In the future, if you need something like that, all that's sold separately as well.
Well folks, that's gonna wrap up our look together at this two-bike Z-TRAK Moto-Chok for standard bike wheels. I'm Steven. Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.