Rope, nets, tarps, and standard cargo straps do not always have E-track fittings. This 9" adapter strap snaps into your E-track and adds a steel D-ring, giving existing tie-down gear a familiar attachment point with a 1,467-lb WLL.
Not every strap, rope, net, or tarp uses an E-track fitting. This 9" strap clips into your Snap-Loc or E-track and gives you a steel D-ring as the connection point instead. Your existing cargo-control gear can attach to the ring while the E-track fitting handles the connection to the track.
The D-ring sits at the end of a 2" wide polyester strap instead of directly against the track. That short webbing section gives your tie-down point room to move with the direction of the strap or rope while the 10-gauge steel fitting stays locked into E-track.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.