Bulky loads can need more reach before you can pull everything tight. This 20' E-track ratchet strap connects to Snap-Loc or standard E-track, while the attached ratchet removes slack and the built-in soft loop keeps metal hardware off your gear.
Changing cargo can leave you needing a different tie-down angle from one load to the next. E-track fittings at both ends connect your 20' strap to Snap-Loc anchors or standard E-track (each sold separately), while the ratchet on the fixed 18" lead end cranks out slack and locks your strap tight. Once it's cinched down, your cargo stays restrained at the tension you set.
The built-in loop end can wrap around your gear as a soft tie-down where you don't want a metal fitting at the contact point. Hook-and-loop ties also gather excess webbing after the ratchet is set, keeping the unused length wrapped up instead of hanging loose around your cargo.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.