Fixed trailer layouts do not work for every load. This E-track wood beam socket holds standard 2" lumber so you can create removable shelving, dividers, cargo restraints, beds, or shoring beams and reposition the bracket as your setup changes.
Changing cargo doesn't always work with a permanent trailer layout. Pair this socket with a second bracket (sold separately) and a standard 2" board between two tracks to create shelving, dividers, cargo restraints, beds, or shoring beams for bulky items. Your E-track becomes the mounting point for a wood structure you can arrange around the cargo you're carrying.
The spring-loaded lever snaps into Snap-Loc or E-track and moves from one opening to another when you need a different position. Holes in the socket also give you the choice of permanently attaching your board with hardware (not included) or leaving it secured in the bracket without permanent attachment. You can remove or reposition your boards and brackets when you need the cargo space back.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with etrailer. Today, we're taking a look at the Snap-Loc E-Track Wood Beam End Socket. So folks, you're gonna be able to turn your E-track setup into shelving or dividers because this socket connects to a standard two-by-four into your E-track system. And a lot of fixed trailers have layouts that don't work for every load. So maybe you want to make removable shelving, dividers, beds, cargo restraints, all kinds of things, you have the option with this setup.
So this just clips directly into the E-track and then you've got screws down here or screw holes, rather, and on the sides. If you want to make it a permanent setup, you can certainly do that. I've seen a lot of people just put them in there for temporary things. Kind of like the photo on the image of the screen there, maybe like a bed or a shelf, but you can quickly remove that as well. This can also pair with other brackets, obviously not just the one, to be able to do that.
So you're going to get quantity one. And again, you have those nine holes for hardware and those kind of things. This is a thick steel socket with a zinc plating, so it's gonna resist corrosion, and it should last for many, many years to come. So once again, folks, whether you're doing shoring beams and repositioning the bracket as that setup changes, this is a great option to go with your E-track. I'm Steven.
Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.