Kat's Heaters Auxiliary Vehicle Heater w/ Fan - 12 Volt - 33,000 Btu

Kats Heaters Vehicle Heaters - KH38800

16-1/2" Wide x 6-3/4" tall x 8-5/8" deep. This auxiliary heater connects to your engine coolant system and blows heat pulled from the coolant into your cab with the internal fan. Wires into a 12-volt vehicle and mounts in the cab.

Features:

• Auxiliary heater can be used along with the factory heater in your vehicle to quickly and efficiently warm and defrost your cab
  • Unit splices into radiator hose
  • Heater core pulls heat from coolant leaving the engine
  • Internal fan blows hot air from heater core into cab
• 2-Speed motor operates fan in high and low settings
  • Remote operating switch can be installed in easy-to-reach location
• Heavy-duty steel construction
• Rear mounting studs allow installation on vehicle floor
• Made in the USA

Specs:

• Heating capacity: 33,000 Btu
• Dimensions: 16-1/2" wide x 6-3/4" tall x 8-5/8" deep
• 12 Volts
• Amperage: 8.5 amps
• Wattage: 102 watts
• 1-Year limited warranty

This auxiliary heater can be used in addition to your vehicle's factory heater to provide extra heat in your cab as you drive. To do this, the heater splices into your radiator hose and accepts coolant that has traveled through the engine. This warm engine coolant is pulled through the heater's core, and is then cycled back into the engine coolant system. The heater's internal fan pulls cold air into the unit and blows it through the now hot heater core. The heat is then transfered from the core to the surrounding air, which is pushed out of the unit by the fan to heat the cab of your vehicle.

This auxiliary heater can be wired to the battery or to the alternator to connect with your vehicle's 12-volt electrical system. Permanent mounting is optional and will require drilling. Adequate clearance and access to your vehicle's coolant system are needed when installing the unit in your vehicle.

38800 Kat's Heaters Auxiliary Vehicle Heater - 12 Volt - 33,000 Btu