Black Friday Deals are Here!
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.
Features:
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind your rear bumper on the driver's side. Once you've plugged in the tow harness, locate your vehicle's battery harness plug behind the driver's-side headlight assembly and plug in the power harness with the fuse holder. Run the harness to your battery and connect it to the positive terminal. Then insert the included fuse into the in-line fuse holder.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.
Incredible selection had just what we needed and at a great price!! Fast shipping and superb quality. Thanks etrailer.com
Great product
This replaced my 2007 NAPA wiring harness an works perfectly. It was also $35 less than I paid NAPA 11 yrs ago for the same part. Hope this one lasts as long.
Mike S - 06/18/2019I haven't installed it yet...but I looked at it and it seems that it will work.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.