T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118438
Retail:$68.39
Our Price: $48.93
You Save: 28%
Confirmed to Fit
2007 Honda Odyssey
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (526)
- Q & A (0)
- Photos
2007 Honda Odyssey - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Honda Odyssey with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point in rear cargo area
- Plug in connector
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 4.2 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the passenger's-side interior trim panel in your rear cargo area. Once you've plugged in the connector, insert the included fuse into your fuse panel as indicated in the instructions.
Once installation is complete, the 4-way flat connector will be stowed in the jack storage compartment of your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118438 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118438
Average Customer Rating: 4.9 out of 5 stars (526 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.by: Stan 03/27/2024
2009 HondaOdyssey
Every time was delivered in a timely manner and in good condition. Installation for the wiring harness was straightforward. I paid a shop to put the hitch on, which I was glad I did. Overall great service nice people. Knowledgeable help
by: Adam Pepper06/28/2013
I left a detailed review for the Hidden Hitch with THIS product as part of the review because I bought it as a package deal. I will say a quick note on this product alone just for customers information. This was ridiculously easy to install. It literally just PLUGS IN to a control board, then you have to remove a small bolt and attack ground wire, zip tie the wires across to the jack compartment for easy storage when not in use and plug in a small fuse up front. I can honestly say that even someone that is not mechanically inclined or used to working on cars could EASILY install this wiring harness. A great product, great customer service. I give it 5 stars. Highly recommend this product and etrailer.com
by: Christopher 04/25/2024
Easy installation with the instruction, and works
by: Jim 01/02/2024
Easy to install, fit factory harness
by: Kenton 07/01/2023
2010 HondaOdyssey
This wiring harness was super easy to install on my 2010 Honda Odyssey. Finding the right part was also a breeze thanks to etrailer.com. They made it super easy to locate the correct part.
by: Eric05/07/2019
2008 HondaOdyssey
Package was slightly opened on the side. Don’t know if someone from the delivery company was tryin to take a look on what it was or ripped open during delivery. When I opened the package it was scratched as if it was dragged on one side on a rough concrete floor.. but I guess looks don’t matter or minor blemishes on a piece of metal thats meant to haul... but maybe it’s just me. If I get something new I want to be the one to scratch it on my own. When I hear new. I think undamaged. As far as quality/install it is beefy and easy... I was able to do it solo but used jack stands to hold it in place for me. Wiring was also a breeze except for the fact that the video said to use a self tapping screw to ground the wire. I was expecting a screw included in the small ziploc bag that came with the lock ties and fuse... but other then that install was also easy. I would definitely recommend this company for its product for its price. Just minor issues that is no big deal to me. I gave you a 4 star cause there is always room for improvement.
by: Mjonesday08/11/2022
2008 HondaOdyssey
Instructions were well written, and the installation was simple to do.
Mjonesday
8/11/2023
The harness worked great while we had the vehicle, just got rid of it.
by: Dennis04/28/2022
Item arrived intact and was straightforward to install. It seems to be working properly so far. We did see this product at cheaper price on another website but E-Trailer seems to have very good customer service.
Dennis
4/30/2023
So far, so good. We only use this product and the trailer during the summer months. Last summer it worked fine with no issues. We hope that it will continue to work properly this coming summer.
by: Eric07/26/2015
2008 HondaOdyssey
I've ordered both their low profile hidden bumper and now the light kit for my 2008 Honda Odyssey...both products are "very" easy to install and work Great! Everything I've ordered arrived to my home in days. I would Highly recommend E-TRAILER and their Products.....you will not be disappointed!!
by: Kirk 09/16/2023
Excellent attention to detail all the way down to the sticker to add inside the fuse box. Excellent instructional video.
by: 01/22/2024
Good value for the money
by: Leah 02/12/2024
2007HondaOdyssey
You saved the day!! Thank you so much.
by: Steve 06/05/2023
Absolutely perfect! Ordering, receiving and installation were absolutely flawless! Thank you!
by: EB11/03/2022
This was just what I needed to wire my Honda Odyssey van to pull my trailer. It was a relatively easy self-install. Came with a fuse. I just had to pull the back interior panel and it was plug-and-play. Then tucked the wiring and voila - my popup camper has lights and is street legal. Very easy experience with etrailer. Highlander recommended!
by: Ken R.08/13/2013
2006 HondaOdyssey
Overall, a very simple process to install in a 2006 Honda Odyssey EX-L - however, I'm having difficulty locating a way to feed the wiring thru the Jack storage area, and out to the bottom of the van (can't find the grommet some other reviewers used) so that I can permanently hookup my wiring on the outside of the van and fed to the trailer hitch.
I'm not a big fan of storing the wiring inside the Jack Storage area, then feeding the wiring harness out thru the tailgate every time I want to use the wiring harness. I was easily able to find a suitable grommet that I fed the wiring harness thru when I owned a 2003 Honda Odyssey - looks like the 2006 has made some design changes in the rear end. I'll keep looking once my arthritic knee allows me to bend my knees.
Ken R.
8/24/2013
Update to my earlier comment posted on 0813/2013. This is a follow on post for a 2006 Honda Odyssey EX-L. I located two easily accessible holes protected by a grommet that leads directly to the bottom of the van - these two grommets are located at the bottom of the storage area beneath the carpeting where the 3rd Row Seats are stored. -Simply lift the 3rd Row Seats if stored into the seating position. -Remove the rear tailgate trim piece same one you had to remove when you first installed the wiring harness.-Lift up on the carpeting that covers the bottom of the storage area for the 3rd Row Seats.-You should be able to see the two grommets left and right at the bottom of the storage area - lift up the grommet location you want to use I used the right one - same side where the wiring harness connects to the van. As soon as you lift out the grommet, you will see daylight!-I cut off the 4 pin connector to be able to feed the wiring thru this hole - you might be able to muscle the connector thru the hole if you push hard enough and will probably have to bend the 4 pin connector thru the hole - youre call. I then had to solder the two pieces back together - pretty simple process if you own a soldering iron and know how to solder. Only issue I saw with this location is to watch the wire sag - this hole location does not offer much protection for the wiring from any potential snag issues while driving if there is too much sagging in the wire. I screwed in 3 conduit-type wire clamps to make sure my wiring does not sag.At some point in the future, I may decide to just drill a new hole on the SIDE as opposed to using the existing BOTTOM hole of this storage area this storage area for the 3rd Row Seating appears to just be a fiberglass and/or plastic resin-type pan that looks like it would be very easy to drill thru - I can then go buy a suitable size grommet to cover the hole.
Jlong
11/1/2015
I used a grommet hole for the factory panel clip. Drilled it out with a 3/8 bit about 4 holes wide.. Then fed the wire through the hole.
by: Jose 08/23/2023
Great quality and easy instructions will illustrations.
by: Rick 06/24/2023
Was very EZ to install and with clear i nstructions.
by: Edwin H.05/29/2013
2007HondaOdyssey
I installed the hitch receiver and wiring harness without any issues, and both work well. I found the video instruction to be much more helpful than the written instructions that came with the products. I needed two new tools: a torque wrench for tightening bolts on the hitch receiver, and a trim removal tool to open the side plastic panel to install the wiring harness.
Edwin H.
5/29/2014
Hitch and wiring still working just fine I would say without a hitch, but that would just be confusing...
by: Dale 02/11/2023
Great installation. No more hunting for the correct wiring to make a splice. Good instructions and good videos.
by: T. B.09/10/2017
2009 HondaOdyssey
It is fairly easily to install with the instructions provided. So far, so good...
by: Easy install06/01/2017
HondaOdyssey
This is a great wiring kit. It is awesome that the Odyssey has a junction box that thus just clips into. The only tricky part is pulling the passenger rear panel and the threshold panel and that isn't to bad either. The only tools needed for this Odyssey wiring harness is a 10mm wrench for the ground terminal and a body panel pry lever. The instructions and pictures are clear as is the nice video. Anybody who wants to can install this harness without a problem with the clear instructions.
Easy I.
6/18/2018
Thanks for the follow up. The hitch and wiring harness have worked great for the last year. Still five-star!
by: Harold 06/02/2023
2008 HondaOdyssey
Super easy install. The video was helpful to show how easy it was. Works great!
by: A. Skier 10/24/2012
2010 HondaOdyssey
Ordered a hitch for Honda Odyssey. Received it 2 days ago, installed yesterday - easily, with the help from a friend. Everything fit just right, no drilling. The electrical part was no problem. Today used it to tow my boat in for service.
Etrailer was great. Minutes after I placed the order I received an email acknowledging the order and offering to call with any questions. An hour or so later, another email informed me that it has been shipped. Excellent job. Thanks!
A. S.
4/24/2014
A year later, everything works fine. Highly recommended. Good product, fine company. Still 5 stars.
by: Jack D.03/13/2013
2007HondaOdyssey
I got a hitch receiver and electrical hook up for a 2007 Honda Odyssey.
Ordering was easy.
Asked one question (e-mail). Got my answer the next day.
Hitch installed in 52 minutes, exactly like instructions.
Hitch had 6 bolt attachment. Others brands I looked at only had 5.
Electrical unit installed in about 27 minutes.
Super happy with the whole process.
Jack D.
3/17/2014
The wiring harness is still working just fine. NO PROBLEMS.
Patrick B.
3/19/2014
Good to know, thanks for checking in.
by: Art01/03/2011
HondaOdyssey
Honda OdysseyPhotos of trailer wiring installation
25
526
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Trailer Lights Not Working when Connected to 2008 Honda OdysseyNot all trailer wiring harnesses are created equal. By that I mean that if there is a weak ground on the trailer side it could work with some but not all vehicles. Also depending on how many lights the trailer has it is possible that it is overdrawing harness # 118438 on your 2008 Honda Odyssey. This particular harness is rated for 2.1 amps per circuit for brake and turn signal lights and 4.2 amps for the running lights. Also you will want to make sure that the wiring harness white ground...
view full answer... - Trailer Wiring Recommendation for a 2005 Honda OdysseyYes, the Tow Ready Trailer Wiring Kit part # 118438 is a confirmed fit for your 2005 Honda Odyssey and it comes with everything you would need to install the kit on your vehicle and provide you with a 4-way. I attached an install video for this kit for you to check out as well.
view full answer... - Blowing 7.5 Amp Fuse When Turn Signal Used on Tow VehicleThrough your testing you have proven that the issue is on the vehicle side and not the trailer side. Your four pole connector has a wires colored green for right turn signal and brake lights, yellow for left turn signal and brake, white is ground, and brown is marker lights. I have included a link to a trailer wiring FAQ that you may wish to review. Like you, I suspect that you have a short, and probably on the green or yellow wire. I would use a electrical multimeter, set it for “continuity.”...
view full answer... - 2003 Honda Odyssey EX Trailer Wiring RecommendationThe T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118438 is not a fit for your 2003 Honda Odyssey. Instead you will want the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118336. This will connect to factory wiring behind the trim panel in the cargo area on the driver's side. A tail light converter is built into this harness so you will have proper trailer function and will not affect the tail lights on your Odyssey. I've attached an...
view full answer... - Installing the Fuse From T-One Harness Part # 118438 on a 2008 Honda Odyssey EXThe fuse compartment can be found on the passenger side kick panel, near the glove box. Open fuse compartment and place the 7.5 amp fuse into the position #5. Attach the fuse label to fuse cover in position #5. The instructions are also accessible on our web site at the link below.
view full answer... - Where Does the Fuse Install From Tow Ready T-One Wiring Harness # 118438 on 2005 Honda OdysseySounds like you are looking at position #5 on the drivers side fuse box of your 2005 Honda Odyssey Touring. When installing the Tow Ready T-One Wiring Harness, part # 118438, on your Odyssey you will want to locate the fuse compartment on the passenger side kick panel, near the glove box. Open the fuse compartment and place the provided 7.5 amp fuse into fuse position #5 in the fuse box. Attach the fuse label to fuse cover in position #5. I am including a link to the installation instructions...
view full answer... - 4-Pole Trailer Connector for 2010 Honda OdysseyThe Tow Ready # 118438 would indeed be the correct 4-pole trailer wiring harness for your 2010 Honda Odyssey. If you click the provided video, you can see the full installation of the wiring harness on a 2010 Odyssey. I've also linked you to the instructions for the wiring harness. I've also linked you to a listing of the other vehicle specific accessories and equipment offered for your Odyssey.
view full answer... - Troubleshooting T-One 4-Pole Harness 118438 Installation in 2006 Honda OdysseyTekonsha 4-pole trailer wiring harness # 118438 is a correct fit for your 2006 Honda Odyssey and I am sorry you're having an issue with its operation. For reference, I linked the instructions and an installation video showing this item installed in a 2006 Odyssey like yours. Since none of your trailer lights function I suspect either a bad ground connection or that the included fuse is bad or is not installed all the way in the receptacle or is in the wrong receptacle. Please refer to...
view full answer... - Trailer Wiring Recommendation for a 2005 Honda OdysseyFor trailer wiring for your 2005 Honda Odyssey you would need the Tow Ready Harness part # 118438 as it has been confirmed as a fit for your 2005 Honda Odyssey. I attached an install video for you to check out as well. This harness does have a converter box to take the taillight signals of your vehicle and convert them into standard 4-way trailer wiring. But the unit itself basically just plugs right into your vehicle for a very easy install.
view full answer... - Wiring Problem 2006 Honda OdysseyAre you meaning that the running lights work, but not the brake lights or turn signals? Try using a circuit tester on the 4 pole connector, as each function is activated. If all this checks out, the problem is on the trailer somewhere. If you don't get a signal for the turn or brake lights, I'm thinking that the converter might have shorted out when the pole broke. Use a circuit tester to test each function on the INPUT side of the converter box. If you have signal going in, but none...
view full answer... - Troubleshooting Trailer Lights that Come on as Soon as Connecting 2006 Honda Odyssey to TrailerMost likely there is a short somewhere that is causing the trailer lights to come on as soon as you connect the harness on your 2006 Honda Odyssey to the trailer. A short will cause constant power draw and will explain why this is happening. I recommend checking both the vehicle and trailer side connectors for any debris, corrosion or damage. You will also want to check the wiring from front to back and look for any frayed, pinched or damaged wire that may be causing the short and repair...
view full answer... - Can the 4-Way Trailer Wiring Harness be Routed Permanently to the Outside of a 2007 Honda OdysseyWhat you can do on your 2007 Honda Odyssey is try to find a grommet at the bottom most part of the cargo area in the back. You will most likely have to remove trim panels and flooring to get to the bare metal of the storage area. The bottom of the jack storage compartment or the spare tire well are good places to look for a grommet. If there is a grommet then you can cut a slit in it and run the 4-Way end through (though you may have to cut the 4-Way end wiring in half and splice it back...
view full answer... - Trailer Brake and Turn Signal Lights Do Not Work When Running Lights are Turned OnIt sounds like there is either a ground problem or the power draw is too much for the wiring system on the vehicle when the running lights are on. First, check the main grounds on the vehicle wiring harness and the trailer connector. All grounds should be attached to clean and corrosion free bare metal surfaces. Check the trailer connectors on both sides for dirt and corrosion and clean them out. Next check the lights themselves. Many trailer lights ground through the mounting studs if...
view full answer... - How Long Would Install For Trailer Hitch and Wiring for 2007 Honda Odyssey TakeDraw Tite states that an average install for their hitch part # 75270 that is a fit for your 2007 Honda Odyssey is going to be right at 30 minutes. So if you were to pay a shop it would be 1/2 a shop hour. The trailer wiring part # 118438 that is a fit for your vehicle too would only take a couple of minutes as well. They might have a minimum rate for even messing with it. But I attached an install video to show you how easy it is.
view full answer... - Would Class II Hitch for 2007 Honda Odyssey Be Able to Tow Small TrailerThe Class II hitches for your 2007 Honda Odyssey like the Draw Tite part # 36417 which is a confirmed fit have a decent towing capacity of 3,500 lbs total trailer weight and 300 lbs tongue weight. If the weight of your trailer is under those figures the hitch would be just fine. You'd also need to check the owners manual of your vehicle to determine the capacities of it as well. Be sure to stay under the lower of the two capacities. For trailer wiring you'd then want the Tekonsha kit...
view full answer... - Trailer Wiring Recommendation for a 2012 Honda Odyssey For your 2012 Honda Odyssey I have a solution for you, but the part # 118438 is not confirmed as a fit as it stopped fitting the Honda Odyssey after 2010. Instead for trailer wiring you would need the part # 118521.
view full answer... - Tekonsha 4-Pole Trailer Wiring Harness for 2004 Honda Odyssey The correct Tekonsha trailer wiring harness for your 2004 Honda Odyssey is part # 118336. To assist you I linked an installation video showing your same model year Odyssey. The part you have # 118438 fits 2005 through 2010 model years of the Odyssey.
view full answer... - Install Video Availability of the Curt Wiring Harness part C56161 on a 2010 Honda OdysseyI can provide you with a video of different brand's wiring harness that will install the exact same as the Curt Custom Fit Vehicle Wiring # C56161 that you referenced. The video I attached shows the Tow Ready Wiring Harness # 118438 being installed on a 2010 Honda Odyssey just like yours.
view full answer... - Right/Stop Function Stays on After Installing the Tekonsha T-One # 118438 on a 2007 Honda OdysseyIf you installed the Tekonsha T-One # 118438 correctly on your 2007 Honda Odyssey (see attached video) then the right turn/stop function on your trailer should not always be on. There are a few things that could be causing this issue; there is an insufficient ground on the trailer or vehicle, or the harness has been overloaded. If you had a powered converted with a lead running to the battery then you could remove the fuse from the power line to reset it, but you do not have a powered...
view full answer... - Trailer Tail Lights Do Not Work/No Power On Brown Wire in Wiring Harness 118438 2005 Honda OdysseyYou can test the wiring harness, # 118438, to determine if it is functioning properly. First, use a circuit tester, like # PTW2993 if needed, to test the wires going into the converter from the vehicle. If there is no signal for the running light circuit, then the issue is on the vehicle. If the signals are correct going into the converter but incorrect coming out to the 4-Way, then the converter is bad, and it will need to be replaced. If you determine the issue is on the 2005 Honda Odyssey,...
view full answer... - Troubleshooting Malfunctioning Trailer Wiring Harness on 2009 Honda OdysseyAccording to your description, it sounds like the converter is shot, allowing output on incorrect circuits. The vast majority of the time, the failure of the converter is caused by a short circuit of some kind in the trailer wiring. Before replacing the trailer wiring harness with a replacement like the Tow Ready # 118438, you'll want to closely examine the wiring on your trailer to find the short. If you don't locate and repair the short, you will continue to blow up wiring harnesses....
view full answer... - Comparing Trailer Wiring Harnesses for a 2008 Honda OdysseyThe Curt wiring harness # C56161 and the Tow Ready wiring harness # 118438 for the 2008 Honda Odyssey install the same way. Both install behind in a junction box located in the cargo area of the van. This is an ideal setup because it uses the factory location on the vehicle. The Curt harness actually uses a newer technology inside the converter box. Both harnesses would work well for you. I have linked instructions and a video for you.
view full answer... - Running Lights Are Not Working On a Trailer Towed by a 2008 Honda OdysseyThe typical cause of trailer running lights not working is a bad ground connection but there are some tests you can do to determine where the problem is. First, disconnect the trailer from the tow vehicle. Then use a circuit tester such as # PTW2993 if you need one to test the connector on the vehicle. Have someone sit in the vehicle and turn on the running lights while you test the connector with the circuit tester. If the running light circuit works at the trailer connector then the...
view full answer... - Troubleshooting Trailer Wiring Harness That Stopped WorkingI wish the fuse would have blown instead of what seems to be the converter box but in your situation that's just how it seems to have gone. You can test this with a circuit tester like # PTW2993 for voltage on the input side of the box as well as on the output side of the box. If voltage is going in but not coming out of the box like it sounds like is going on then the issue is the box and you'd have to replace the entire kit since they are not available separately.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Patrick B
Video Edited:
Chris R
Test Fit:
Nicholas E
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Adam P.
1/5/2015
Havent used the wires in over a year after our move across the USA. Just towed a boat this late week and the wires all still worked perfect. Had no issues and they were in the same shape as when I first opened the box. High quality product, highly recommend.