Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tired of dealing with complex wiring installations for your trailer? The Curt T-Connector Vehicle Wiring Harness makes it easy to set up a 4-way trailer connector right at the back of your vehicle. Simply plug it into your existing vehicle wiring, no cutting or splicing required, for a clean and efficient installation.
Say goodbye to complicated and time-consuming wiring setups! This harness is custom-designed to fit behind the tail lights of your vehicle. It's perfectly engineered to match your Dodge Dakota or similar vehicle models, integrating seamlessly with your vehicle’s existing system for a hassle-free experience.
Ensure consistent signal connectivity to your trailer with the included dust cap, which helps to keep the 4-way flat connector clean and ready to function by protecting it from dirt and road grime. This small but essential feature helps in maintaining the longevity and reliability of your trailer's lighting connection.
whether you're driving on a 2004-2011 Dodge Dakota, Mitsubishi Raider, or other compatible models, this wiring harness is versatile. Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately), this harness expands your trailer's connectivity options, making it easy for you to adapt to various towing needs.
Avoid common corrosive damages that come with trailer wiring using a small amount of grease on all electrical connections. It aids in preventing rust and maintains efficient performance throughout seasons and towing adventures.
Imagine having your trailer wiring ready in just 15 minutes. That's the kind of rapid installation this T-connector offers, allowing you to spend less time setting up and more time enjoying the smooth operation of your trailer's lights on any journey.
California residents: click here
Exactly what I wanted. Installed in 15 minutes. Works great.
Dakota trailer wiring harness. - good product - quick service - best price I could find.
Perfect fit with a 10 min install time. Works great.
Works like a charm . now I need a receiver hitch , I will be ordering it
from etrailor
Just what I needed. No problem installing, instructions were great.
Product as described, fast shipping, installation instructions are right on.
when i got the wiring harness it only took me 5 mins to install. the zip ties could be alittle longer but they gave me enough to get the job done. Anyone who has a dakota i highly recommend this.
Easy to install. Pricing through e-trailer with shipping was half the price that NAPA wanted for the same product.
Not only is the product great and exactly as described, but the customer service is out of this world! Great communication all around! In fact, I don't think I've ever had a company keep me up to date about the current status of my order as well as eTrailer. My order seemed very personalized.
Would definitely do business with again!
Easy to install. Good instructions. Quick delivery and good price.
Good product, easy installation for my 2007 Dodge Dakota. Shipping was very fast. Overall, more than pleased. Will certainly look to your company for future needs.
Easy peasy !! Remove light plug in harness, plastic tie to factory harness all done
This product (item #55323) is very easy to install. I found multiple videos on YouTube and the instructions are just as easy to follow. All I needed to do was clip some wires together and that’s it! No splicing necessary which is what I was looking for. I signed up for the cheapest shipping method and it still showed up here in Minnesota a couple days early. Now I can actually have working lights on my trailer! Totally worth the money and I will be shopping etrailer.com more often! Thank you!
Product was easy to install, haven't tried it yet, but the truck lights function properly at least, the shipping took longer than was originally promised by a few days.
So far so great super easy install with the hitch and wiring harness. Great price and fast shipping I will be back for all my trailer needs. Thanks guys.
Performed exactly as advertised on my 2005 Dodge Dakota. Although the vídeo wasn't super helpful with specifics (like the vídeo for the hitch intall, which was perfect), it's pretty easy to figure out. I got a little bit ahead of myself and unplugged ALL of the tail light connectors when in fact I only had to unplug one on each side. On my Dakota, each side has two separate bulbs and therfore two connectors. The bottom bulb and conector are only for the White backup light and there is no such conector on the trailer wiring harness therefore no need to mess with that conector. The top bulb and conector are for the running lights and blinker/brake light. Therefore, you only have to unplug that top conector and insert the conector for the trailer wire in it's place. Last trick, at least for my Dakota, the tail-light lens module comes off by pulling it straight back towards the rear of the truck and at first it seemed like it would never let loose. I almost broke one of the alignment pins by attempting to twist or pivot the lens module and it would have been better to find a way to pry it off by pulling straight toward the back of the truck rather than pulling out to the side. The trailer wiring harness was a perfect fit for my Dakota and worked perfectly once installed, no cutting or splicing of any kind was necessary. The only other thing you may want to do is buy some dielectric grease to prevent corrosion in the contact points of the connectors. Most auto parts stores sell a single use packet of dielectric grease for about $1.79 on a rack near the cash register along with single use packets of caliper pin grease, silicone grease and other special lubricants.
Fit perfectly. Installed the trailer hitch receiver by myself in about an hour but was no easy task (had no help).
The trailer wiring harness installation info could have explained the installation a little better but worked as described.
Stevec
3/14/2018
Still working great!
I bought one a few yrs back for my 2000 dodge Dakota. They worked Awesome intal I got rear ended. I pick up another dodge Dakota. I took my old ones off for my next truck. But didn’t match up.
That’s ok.. Yes they worked great & easy to intal.
so I called etrailer ordered another set.
2-3 days later & 5 minutes to intal
Happy Camper. Plug & play that’s it.. well Recommend... Happy trucking
Thx etrailer ??
Manny L.
5/14/2021
This set works just as awesome as the first one I bought… Great product..
Talk about an easy fix!! Highly recommend this product!
I haven't been able to test the product with a trailer, but I can easily write a review about the installation and etrailer's efficiency.
Etrailer processed the order and had at my door within three days. The product was packaged very well, and etrailer's communication was top notch. The kit installed with very little effort, and etrailer's installation video was perfect.
I will definitely come back for future trailer related needs.
Marshall
7/20/2015
Honestly, I never had to use it. And I just sold the truck last week. Thank you for following up. Shows great customer service.
Had the harness in two days and it was exactly as advertised. Instructions were just a skosh bit fuzzy but that's probably because I'm on the downhill side of 78. Only problem I experienced was popping the plastic "rivets" out of the bed panel while removing the tail light assembly without breaking the lens. Works great and had it done in less than an hour. Thanks
Chuck S.
6/8/2017
I no longer have the vehicle but everything I have ever purchased from you folks has been really good.
The kit appeared very well made, good materials. It was very simple to install (using the well-written instructions). I tested my lights before applying the tie-wraps and it functioned perfectly, so I applied the tie-wraps, and was finished. It took me about 45 minutes total. Not bad at all. Good product, reasonably priced, well made, and easy to install.
Joseph
10/25/2020
Works great after a year
I could not be any happier with this product or with etrailer. This installation was very easy from beginning to finish. The price was very reasonable and I look forward to do business with etrailer in the near future.
Top bolt threads a little difficult but. Greased it and then scrwwee down ok . fit perfectly. Great deal along with the tail light wiring. Easy to install
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
4/17/2018
We actually offer a small tube of dielectric grease as part #496971. Dielectric grease works very well for keeping moisture and corrosion out of electrical connections.
Helpful Links
Accessories-and-Parts/Loctite/LT37534.html