bing tracking image
  1. Roof Rack
  2. Yakima
  3. Aero Bars
  4. 60 Inch Bar
  5. Black
  6. Overhang
THIS ITEM IS NOT A FIT FOR
1997 BMW M3
Special Savings on Select Yakima Products.
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Yakima

Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars - Steel - Black - Qty 2

Part Number: Y99YB
In Stock
$523.20
Roof Rack
Not Confirmed to Fit

1997 BMW M3

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars work with most clamp-on accessories. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars - Steel - Black - Qty 2 part number Y99YB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (44008)
  • Q & A (0)
  • Videos (1)
  • Photos

Yakima Roof Rack - Y99YB

Highlights

  • Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
  • Complete Roof Rack System: Includes 2 CoreBars, 4 BaseLine towers, and a custom fit kit for your vehicle.
  • Heavy-Duty Strength: Steel CoreBars support up to 220 lbs for kayaks, cargo boxes, or camping gear.
  • Quieter Highway Trips: Aero-style bars cut wind noise while maintaining strong load capacity.
  • Long Loading Space: 60" overhang design offers extra room for multiple clamp-on accessories.
  • Corrosion Protection: Black vinyl coating shields steel bars from rust and wear over time.

Features to know about

Stay Steady on Every Haul: Heavy-Duty Steel CoreBars

When you’re loading up kayaks, canoes, or a cargo box, you want crossbars that feel solid and secure. The Yakima BaseLine Roof Rack comes with CoreBars made of steel for serious strength and stability. Each bar has a black vinyl coating to protect against corrosion, so it stays looking good after long trips in all kinds of weather. With a total weight capacity of 220 lbs, these bars are built to handle real gear without flexing or wobbling.

Cut Down on Wind Noise: Aerodynamic Bar Shape

Roof racks can be noisy on the highway, but these CoreBars have an aero-style profile designed to move through the air with less drag and sound. The smooth, tapered design helps reduce the rush of wind so your road trips are quieter and more enjoyable. You’ll notice the difference when you can actually hear your playlist or carry on a conversation without shouting over the whistling.

Bring the Gear You Want: Works with Most Clamp-On Accessories

Whether it’s a kayak cradle in summer or a cargo box for family trips, these full-length bars are ready to carry what you need. The design works with most clamp-on accessories from popular brands, giving you flexibility for different adventures. You don’t have to buy a separate setup every time your plans change—just mount what you need and go.

Set It Up Once, Hit the Road Fast: Custom Fit for Naked Roofs

Installing a roof rack doesn’t have to be complicated. The BaseLine system uses custom components built specifically for vehicles with naked roofs, so everything sits where it should without guesswork. Once mounted, the rack feels like part of the vehicle. And if you want added protection when you park at a trailhead or hotel, Yakima’s Same Key System lock cores (sold separately) let you secure the rack against theft.

Built to Last for Years of Trips: Quality Construction and Warranty

Every piece of this setup—from the coated steel bars to the durable BaseLine towers—is made to handle daily use and long-distance hauls. The construction strikes a balance between strength and quiet performance, giving you confidence trip after trip. Yakima backs it all with a limited lifetime warranty for peace of mind that matches the rack’s rugged design.

Specs

Dimensions

  • Crossbar dimensions: 60" long x 2-3/4" wide x 1" tall

Weight and Capacity

  • Weight capacity: 220 lbs

Color

  • Color: black

Construction

  • Construction: steel

Warranty

  • Limited lifetime warranty

8000422 Yakima CoreBar Crossbars - Steel - Aero Profile - 60" Long - Qty 2

8000162 Yakima BaseLine Towers for CoreBar, JetStream, and RoundBar Crossbars - Bare Roofs - Qty 4

8006121 Custom BaseClips and Pads for Yakima BaseLine Towers

Installation Details Y99YB Installation instructionsAlternate Instructions Y99YB Installation instructions



Video of Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars - Steel - Black - Qty 2
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for How to Install the Yakima BaseLine Roof Rack Kit - 2018 Jeep Grand Cherokee

Hey, everyone, it's Evangeline here at etrailer. Today we have the Yakima Roof Rack System here on the 2018 Jeep Grand Cherokee. Now this specific system is designed for the Grand Cherokee that has the matte flush rails, so with this, you are able to carry around different cargo, baskets, kayaks, and all those fun accessories. So we'll take a look at how this fits this vehicle, and I'll also show you how to get it installed. So there's a bunch of different types of rails on the Grand Cherokee, so I was very specific about the matte black ones just because while these are technically flush rails, you can't really clamp much to it. So for that reason, Yakima found that the best fit for a roof rack is a BaseLine tower system, one that has pads that contour to the curves of your roof, as well as hooks that fit perfectly into the door area of your Grand Cherokee.

So with this kit, you have three important pieces. You have your crossbars, you have your foot pack or towers, and then you have your custom fit kit. It might be a little confusing getting them all paired together, but that's what our fit guide at etrailer is for. Put in your year, make, model, select your type of roof, and then we'll have the kits all kitted together for you. By the way, what I have here today are the 60-inch long CoreBars, which are very helpful for being aerodynamic.

But if you do want the other style, let's say JetStream bars or HD bars, we have kits and fits for those too. With the 60-inch bar, these are gonna sit a little bit further past the tower. That's called overhang. I like overhang 'cause then you can maximize your crossbar space. Here we have from tower to end cap 4 1/2 inches.

So this is areas that you can still clamp other accessories too if you want them further out or a little bit easier to reach. Some other measurements that are important though are roof clearances, and there's two measurements here. The first is how much space do I have underneath the crossbar and the roof. So here I have about three inches of space. Now, that will be a little bit different depending on where you measure, but that's still pretty good space for most types of clamps that clamp around your bar.

The next one is gonna be the height added to the roof. So roof to the top of crossbar, a little past four inches. That's where your cargo sits. So let's say you have skis with extra tall bindings. You wanna make sure that you have space for those bindings when your skis are on your roof and you're not scratching things up. And if you find you don't have enough space, that's when you can take a look at some of our ski carriers or other accessories that give you that extra height and extra clearance. So the measurements here on our Grand Cherokee are pretty good. A lot of clearance but not too much where we still look pretty sleek. The clearance underneath is also important because you can't channel mount your accessories. They have to be clamped around accessories. So compared to the JetStream bars, which has channels that run in the middle of the bar, this one is a very straightforward, very sleek, very aerodynamic crossbar. So if you do have channel accessories, check out the JetStream 60-inch bars as an alternative kit. But if you're fine with clamp style only, then that's what the CoreBar is very popular for. You don't have to worry about extra features that you may not even use. The main benefit of the Yakima BaseLine roof rack is also its main downside compared to either roof racks. So this roof rack is pretty tricky to install if you're installing it for the very first time. Now, I do have an installation video at the end of this video that help guide you through that process to make it a bit easier. But the bonus to it is that you can then get the most custom fit roof rack on top of your roof. Meaning, you'll notice here that your roof on your Jeep Grand Cherokee is angled downwards towards the front, and then the tower then compensates and angles itself as well as the crossbars so that you have a very level surface from the first crossbar to the last crossbar. You also have it at a really easy to use or not as intrusive spot on your vehicle. Meaning, if you have your crossbars further back, you then run out of things that you can carry because then you can't open up your hatch. So that's why Yakima placed their crossbars in this position. You then get a 32-inch crossbar space. Meaning, from one crossbar to the other, that's 32 inches of space, which is on the longer end. You'll still be able to fit most types of accessories, but you'll especially be able to fit longer ladders, longer kayaks and canoes, things like that. So if you want something that is very custom fit for your vehicle despite being an aftermarket roof rack and still gives you a very strong and level surface, then that's where the Yakima roof rack comes in handy. On the other side, it does take longer to install and to fine tune to get that very specific measurement. So it does depend on what your priority is. Installing your roof rack might seem a little complicated and that's because it is. There's gonna be a bunch of different bolts and measurements and things like that. So I'm gonna guide you through that process and hopefully that'll make it a bit easier. I already installed the front crossbar and we are going to install the rear crossbar together. Now I am installing the Core crossbar. So if you have a JetStream bar, it will look a little similar but be a slightly different process. For the Core crossbar, it all starts with removing at the end cap and getting at these collars on there. So you're going to want two collars on your CoreBar and then you put the end cap back on. And that way for the tower or the foot pack, we can then get that set up. So you first start by going to the front and you're gonna pull this door. Pull it would open till it clicks. Then you're going to go to the top and then you're gonna get your adapter plates, and then this also clicks into your tower. (adapter clicks) And then when you turn it around, since you open that door, you'll then be able to see that bolt on the inside. So go ahead and get your tool 'cause this will fit for that bolt. And that way when you fit this tower over the collar, that bolt will line up. Do this for both sides of the crossbar. The instructions will have you slide the bar onto the collar. That, I find, is pretty tricky to do, so this is the route that I go. Once you're on there, you're only gonna need to thread that bolt on in just a couple threads. Do not tighten it back down yet because you're still gonna need to slide that collar back and forth. Here we're gonna have our M3 measurement, and that's gonna be 41 inches and 5/8 of an inch. You do get a tape measure included with your kit. Now, you also have to make sure that that measurement is centered. So in our case here for the rear crossbar, 41 5/8 would half down to 20 13/16 of an inch, so make sure that's where the arrow is, and also make sure the arrow is facing away from you. Once you've figured out where the tower goes, you're then going to tighten it down in that spot. So this is when you adjust for the pitch. So see how it is adjusting the tower back and forth. Now for the case of the rear bar, the pitch is B, which is just the center, so very straightforward, we're gonna use our tool to tighten that down. Now, before I fully tighten down, I'm also gonna double check the toll. Now, the toll is adjusted by just pivoting the tower side to side. In our case here, we don't need to adjust the toll. It's gonna be in the middle, so that also gets tightened down. So listen for this click. (bolt clicks) With our special tool, whenever we tighten down a bolt, it stops at this very specific torque. So always tighten down all your bolts until they click when instructed to do so. (bolts clicking) Next step is to get your foot packs. For the Jeep Grand Cherokee, all the foot packs at the same number, so I'm not concerned about it. Just get one and pop it onto that tower, (foot pack thudding) making sure that that arrow and number are facing the ends of the bars. And then for figuring out where on your roof the crossbars go, you do have those measurements written. So for the front crossbar, it's gonna be 10 1/2 inches from the edge of your windshield to the center of your tower. But then for the second measurement, which is M4, we go from the leading edge of the front crossbar to the leading edge of the rear bar. So we're gonna go for 32 inches, and then we're gonna make a tentative mark here on top of the vehicle to get this on there. Making sure that those rubber foot pads are on there, we're then going to gently place our crossbar into position. And you wanna double check that your crossbar's facing the right way, meaning the taller portions facing front and the tapered edge faces the back of the vehicle. And as for measuring, you'll know you did a good job if your rubber pad perfectly lines up with the grooves on your Jeep. So this is what that looks like. You'll see that little notch in that rubber pad fits against the wall of that side panel, and you'll want it to look like that on both sides. You're then gonna clean off the end of your vehicle because that's gonna be where your hook makes contact. So opening up this door, we're then going to slide this hook into that opening underneath, and then that hook slides in until it's get caught by the drive bolt. Now, notice here how the hook does make contact with the edge of our door, so we're gonna loosen that drive bolt a bit. We need to loosen this just so that we have enough clearance for this to swing down. And that's what the swing bolt is for up top. So now we're going to tighten down the swing bolt, and you'll see how it lowers your hook. And we're gonna tighten it just until it makes contact with the vehicle edge. So do that on both sides, and now we're gonna tighten down the drive bolt just until the hook makes contact underneath with the vehicle. Now, we're not gonna tighten down that drive bolt because we're gonna go back to the swing bolt and then fully tighten the swing bolt down. But you wanna make sure you're easily tighten down on both sides of the vehicle. You don't wanna pull your whole system one way to the other of the vehicle, and that's why we go back and forth as we tighten down these bolts. So the very first thing you're gonna torque down is gonna be the swing bolt up top. So once that's torqued on both sides, that's when you can then tighten down the drive bolt on both sides. So continue on until your torque tool clicks. And what I always recommend doing too is have it click at least twice, kind of like a gas cap. (torque tool clicks) (torque tool clicking) There we go. Everything looks flush, everything looks secure, everything's been double checked, we're now gonna close that drive bolts door and then close this top door, and then we're going to put our end cap back on. So this goes in from the bottom, pivots up, (end cap clicks) clicks into place. If you have the metal lock cores from the Yakima Same Key System, which is a big pack of cores sold separately, now's gonna be the perfect time to replace this plastic cover with that metal lock core. If you followed all these steps correctly, then don't be worried about slamming the door on those hooks because you've installed your roof rack. And that's gonna be about it. You're now ready to load up this crossbar with all the cargo and all the things for your adventures, and now you can hit the road. This right here was a look at the Yakima Roof Rack System with the 60-inch long CoreBars, the Yakima BaseLine towers, and the custom fit kit for your 2018 Jeep Grand Cherokee with matte black flush rails. My name is Evangeline, and I hope you enjoyed this journey.

Ratings & Reviews

4.8

45145 reviews
5 Stars
(38974)
4 Stars
(4284)
3 Stars
(375)
2 Stars
(421)
1 Star
(1091)
Review Sort Icon
by:
Great products but even better customer service!! Cammi and Kate have always been the best in ensuring my orders get to me and the products are exactly what I need!!!!
Keith profile picture

Keith

8/29/2025

Still the best bars ever!! Love them

by:
Ford Flex
We purchased the Yakima Skyline Towers roof rack with the Jet Stream crossbars. Took about 2 hours to install on the naked roof of our Flex. I drilled through the roof strip for the mounting bolts and they fit tighter than the factory rails. Very happy with our choice.
by:
Perfect. Perfect. Easy to install and high quality. Confident in this product. Excellent instructions. Used with towers of course! Towers and crossbars have demonstrated to be strong and durable with several trips with kayaks.
by:
2011 Honda Element
Was skeptical at first because I needed the posts as well for my 2011 Honda Element. The Honda crossbars were not adequately weight rated and is why I opted for Yakima. Couldn't be happier with my choice as this assembly has served me well throughout the year.
by:
Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer
Brooke M. profile picture
Etrailer Expert

Brooke M.

2/26/2025

Thanks, Eric! Glad the crossbars have been working well for you :)

by:
I ordered the wrong set up for my car, but the excellent customer service specialist set me up and expedited my roof rack that fit perfectly. I highly recommend calling and speaking with the knowledgeable staff about your needs. I'm super happy with the experience overall!
by:
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by:
2019 Toyota Highlander
I have not bought car roof racks for decades--back when there were those very useful rain gutters. So I was shocked with the high prices. But what you get today is much more carefully engineered with a complicated construction. This Yakima version even comes with a manual 3.5 mm hex driver which turns out to be a torque wrench too. You use it 16 times, torquing to its limit, in installing the two cross rails on the four towers. Years ago you installed the towers where you wanted them on the rain gutters and adjusted the cross rails by sight. No more. You must go on line to Yakima. You must get the precisely engineered dimensions for your exact vehicle. You even adjust the towers for the roof slope and any toe-in of the roof line. Pay attention to the precise instructions. The result is very solid. I wish that I had more space between the cross rails. There is room for another 6 or 8 inches given where the door openings on my 2019 Toyota Highlander are spaced. But then the rear base clips would be different and that logistics would add yet more to the price. I am confident that I can secure a 4 X 8 sheet of plywood on the cross rails. And I will find my vehicle in the mall parking lot easier with those good looking rails. While I am happy with the end product, I wish the vendors had given more explanation of the fixed dimensions of today's installations. That would have helped make my on-line shopping less frustrating. Part of the problem is that Yakima and Thule do not provide cross rails for my LE Highlander's existing tower bases. And I could not get 60 inch cross rails on any of the versions that fit my LE's bases.
by:
The roof rack has been awesome! It has been really handy to be able to attach our bike rack attachment, kayak bars or traveling cargo carrier. My only complaint is that the end caps fell off somewhere along one of our many adventures and looks a bit disheveled. Other than the appearance it has been very versatile and we love it!
by:
I want to thank the staff at eTrailer for their outstanding support. After my roof rack order got off to a shaky start the customer service staff stepped in and made it right; 100% RIGHT. I cannot thank them, and eTrailer, enough. Regarding the roof rack itself, I have now installed it and can vouch that the installation was a breeze. All parts fit and the instructions were correct. For the record, this is not my first purchase from eTrailer (I've bought hitch items from them before) and it won't be my last. They have ALWAYS given great service, their web site works, their products and descriptions are good, etc., etc. Thank you!
by:
Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.

For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7.
by:
I did a lot of research before purchasing my roof rack. I came across this website and liked the prices, and after much thought, decided to get the Yakima CoreBar crossbars. I received my roof rack within a couple days of ordering! It's extremely sturdy and doesn't make hardly any wind noise. I love it and it looks great on my car, couldn't be happier with my purchase!!
by:
The instructions were different for another set of bars. Was a pain to get right...all the measurements on Yakima were off...I figured it out on my own...should have got Thule or nicer bars ..end caps were not good either...flawed fit... otherwise will do just not happy with the product perse or instructions...delivery good...will see how they do.
by:
Had all parts in stock. This is the number 1 reason purchased from Etrailer.com. I was given tracking info the entire way to destination. Order shipped same day. Definitely a 5 star company. Thanks Etrailer.com.
by:
2017 Kia Sedona
This Yakima rack system for my 2017 Kia Sedona works great and are rock solid. I have two Kayaks I take to the lake, river, and beach house for vacations. Dena was extremely helpful and kept me up to date on everything. It’s very seldom to find a company with reps that actually care about the customer!!!! Please keep this going! The shipping was fast and easy and I had them installed within an hour in this Georgia heat! The only thing missing was the etrailer stickers......... ;p I would definitely recommend this product from etrailer for any of you rack needs!!!
by:
2004 Toyota Camry
I have a 2004 Toyota Camry, my purpose is to purchase this Yakima Baseline System for Rooftop tent. My 23Zero rooftop tent weighs 130 lb, so far it's super solid. I did some minor adjustments based on the shape and level of the roof when mounting it.
by:
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by:
One year later and everything works well. I had a problem early on where the rubber protection for one of the j clips from the base towers came off. Contacted etrailer and they sent me a whole new assembly direct from Yakima. Thanks for the prompt response and service!
by:
George J.
Like to say thank you .
The roof rack for my 2022 trail boss looks great.
etrailer.com And Yakima roof racks has a VERY good product .
I would have given you guys more stars if I could.
Shipping Time , boxing of the product and the way everything went together was
A #1. Easy and fast
.
Also, removal just as fast.
Thanks again.
by:
These crossbars have held-up well across for a year now on multiple road trips across some major climate swings - so far, so good!
by:
The 60" CoreBar Crossbars will be much more useful to us than the original 50" bars placed on our shell at the factory. The only issue I had was that there were no instructions with the bars. It took a little while for me to figure out how the old bars came off and how to put the new ones on but I'll consider that a learning experience.
by:
I have truly enjoyed this system. It allows our family of five plus our dog to stretch out in the car while our gear is secured on the roof. It takes a bit to mount it but I want it secure and it does fine with a roof box at interstate speeds. I absolutely recommend this system.
by:
Chevrolet Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
by:
Product was packaged well, arrived in perfect condition.
Instructions easy to follow. Installation took less than (1) hour. I did it alone & I’m 76 yrs. old.
Is very sturdy. Looks good on my 5 door Subaru.
The feature that impressed me the most in dealing with your company was how I was able to track my package inside your facility with the name of the employee handling the item before it even shipped. Very organized. Would definitely recommend you to others & purchase from you again.
by:
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
25
45145
true
Show More Reviews

See what our Experts say about this Yakima Roof Rack


Info for this part was:

Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Daron K
Edited by:
Daron K
Employee Alex H
Written by:
Alex H
Employee Evangeline M
Test Fit:
Evangeline M
Employee Kyle M
Video by:
Kyle M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924