Do They Make a Custom Fit 5-Way Connector for a 2019 Acura MDX?
Updated 11/13/2025 | Published 10/18/2025 >
Products Featured in This Question
Question:
I have a 2019 Acura mdx and installed a 4 pin modular kit. my trailer is 5 pin and I need a 5 pin tow vehicle with back up lights to deactivate surge brakes. I bought a 5 pin Hopkins to 4 pin adapter with blue wire to hook into back up lights on vehicle. Where do you do that and what color is the wire? Also is there a 5 pin plug in module for this vehicle that I should install instead? Thanks Paul
asked by: Paul S
Expert Reply:
Hey Paul, welcome back. They do not make a plug and play 5-way trailer connector for a 2019 Acura MDX. Just a 4-way connector like the Curt item # C56192. The blue wire on the Adapter 4-Pole to 5-Pole Trailer Wiring Adapter item # 47515 does connect to the reverse circuit/back up lights on your vehicle but I don't have anyway of knowing what wire it is.
You'll need to use a circuit tester like item # PTW2992 and a buddy to test the wires going to your tail lights. You'll need to find the wire that has voltage running through it only when your Acura is in reverse.
What kind of boat do you have?
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Q&A: Why Does 2016 Acura MDX Call for 20 Amp Fuse But For Curt Trailer Wiring 10 Amp Fuse is Recommended
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Replacement Tail Lights for a 2008 Featherlite 4926 Car Hauler Trailer
- Q&A: Recommended Front SumoSprings for a 2026 Thor Vegas on Ford E450 Chassis
- Q&A: What are the Correct Bearings and Races for Dexter 8-201 Electric Drum Brakes?
- Q&A: Replacement Hub for Harbor Freight 4 x 8 Trailer
- Q&A: Bearing Buddy Grease Caps for Hub Bore Dimension of 2.05-Inches
- Q&A: Replacement Hub For A Trailer With A BT8 Spindle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision



Jerred H.
11/13/2025
Hey Paul, were you able to find the correct reverse light wire on your MDX using the circuit tester? Knowing how that connection worked could really help others trying to hook up a 5-pin trailer for their boat.