Trailer Cover For 7x14 V-nose Cargo Trailer  

For a 14 foot long V-nose trailer the best cover solution would be the Adco SFS part #290-46003 which is a horse trailer cover that allows you to adjust in the front to match the V-nose contour.

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

The best option we have to cover the 6x12 V-nose Arising Industries Cargo Trailer is Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46002 which fits trailers 10'1" - 12' long not including the trailer tongue. The Adco is your…

I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…

Hey Steeves! The best cover for your V-Nose trailer is going to be the Adco SFS AquaShed item #290-46002 you were looking at. It fits fit trailers from 10'1" to 12' long, that are 106" wide, and 94" tall so it's the perfect…

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

Marty, it sounds like you're looking for the Replacement Short Arm Assembly for RV Awnings #LC404523. This is going to replace any Lippert Solera short arm assembly, measures 63" long, and includes the wall-mounted bracket, outer arm, inner…

Hey Todd, yes the Solera 2000 Series and Edge Hardware part #LC65AF does come with two arms and the right hand side does have the drive motor but the wires do not come out of the top of the drive motor so you might email me a picture of what you have…

Hey Steve, for the Solera 2000 awning the correct replacement arms is the kit part #LC65AF that you referenced. Or if you need just the idler arm you'd want the part #LC62ED or if you want the drive arm part #LC22ED.

Hey Tyler, so the difference is the amount of motors that each has. The Lippert PSX2 has two and the Lippert PSX1 like the part #LC298707 has a single motor. The foot print and mounting etc. is exact same so this will fit and work great in place of…

Thanks for all the detailed information! For a 15,000 BTU AC Unit to replace your Dometic B57915.711C0, you will want the Advent Air Replacement RV Air Conditioner for Dometic Setup item #ACDOM150B in black or item #ACDOM150 in white. These are…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…