Recommended Cover for 7x12 V-Nose Utility Trailers

Question

Question:

I have a v nose 7x12 utility trailer and wanted to know what size of cover I should order?

asked by: John G

0

Expert Reply:

The Adco SFS AquaShed Cover for Bumper Pull Trailers work perfectly with V-Nose Utility Trailers. In order to choose the correct one you need to know the length of the body from nose to bumper, part # 290-46002 for trailers up to 12' or part # 290-46003 for trailers up to 14' would be two viable options.

expert reply by: Conner L

0

Answer 1

I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…

view full answer...

Answer 2

The Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 12' Long #290-46002 will work well with the V-nose Cargo trailer in your photo as long as it is between 10 feet 1 inch and 12 feet long. If your trailer is 12 feet 1 inch to 14 feet…

view full answer...

Answer 3

For a 12 foot long enclosed trailer the best cover would be the Adco SFS Aquashed part #290-46002. This is correct size and although it says it's for a horse trailer it is the correct shape as well. It has access panels on the side for access to…

view full answer...

Answer 4

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 5

Hey Brad, congrats on the new camper! The best cover for your 2026 KZ Sportsmen 130 RD is going to be the Adco SFS AquaShed RV Cover for Travel Trailers up to 15' 1/4" Long item #290-52238. It's made of a weather-resistant, 3-ply top…

view full answer...

Answer 6

The best option we have to cover the 6x12 V-nose Arising Industries Cargo Trailer is Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46002 which fits trailers 10'1" - 12' long not including the trailer tongue. The Adco is your…

view full answer...

Answer 7

For a 12 foot long V-nose trailer you would want the Adco SFS part #290-46002 which is correct size and has adjustments in the front of the trailer that allow it to fit the shape of the V-nose.

view full answer...

Answer 8

The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray #290-46004 would work for your 7' x 16' enclosed trailer, but there is a chance that it doesn't completely cover the bottom of the wheels and tires since it…

view full answer...

Answer 9

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long #290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the front and…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Factory brake controllers seem to unfortunately be very temperamental and usually quite a bit more expensive that an aftermarket brake controller so I have to recommend going with an aftermarket option. Luckily there is a brake controller port so…

view full answer...

Recommended Cover for 7x12 V-Nose Utility Trailers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching