bing tracking image
Q & A Icon

Recommended 12 Foot Cargo Trailer Storage Cover

Question:

Will this fit a 6x12 v-nose cargo trailer?

0

Expert Reply:

The Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 12' Long # 290-46002 will work well with the V-nose Cargo trailer in your photo as long as it is between 10 feet 1 inch and 12 feet long. If your trailer is 12 feet 1 inch to 14 feet long, then I recommend # 290-46003 instead. Measure from the longest two points including a bumper but excluding the trailer tongue to determine size needed. These covers feature triple layer SFS AquaShed top panel and polypropylene sides. They have multiple zipper entry doors and access to rear ramp or doors. They have a buckle cinching system to remove slack and prevent billowing.

click to enlarge
expert reply by:
0

Products Referenced in This Question


Product Page this Question was Asked From


Follow up Questions


Eric
I have a 24’x8.5’ box trailer with a 5’ V nose with an extra 6” height from a stand trailer. Looking for a cover for it for storage
Etrailer Expert
Reply from Jon G.

I'm guessing the box itself is 19'? The closest thing we have for your trailer is the part # 290-46005 but it will only fit up to 18' long box trailers. You could potentially use something like part # 290-34840 but I'm not sure how well it will fit since it's designed for travel trailers.

Rich V.
i have a 7x12 bull nose that measures 14 to the nose and then the hitch sticks out 2' past the nose and 92 high. the width is 7' + the wheels and fenders stick out 10" more on each side. looking for access to back amp and passenger side door
Etrailer Expert
Reply from Chris R.

The Adco # 290-46003 will work really well for your trailer - you don't need to worry about the tongue length since the cover won't be fitting over that portion.

Dave D.
I have a 6 x 14 v nose trailer.The v nose is not part of the measurement.What cover would be good.The trailer cover is black thanks
Etrailer Expert
Reply from Chris R.

The Adco SFS AquaShed # 290-46004 should work really well for your trailer. It's designed for trailers like yours that are up to 16 feet in length (including the V-nose). I'd just take a quick measurement of your trailer's overall length, from V-nose to rear, to make sure it doesn't exceed 16 feet.

Mark S.
Hi i have a v nose snowmobile trailer its 14 feet with the v 101 wide top to bottom form the ground to the top of the trailer is 90 inch and do you have something were the back opens up thanks
Etrailer Expert
Reply from Chris R.

The Adco # 290-46003 should work really well. It's designed for 14 foot long trailers like yours, features a zippered rear panel opening, and matches up to both your width and height measurements.

Thomas W.
I have a Featherlite motorcycle trailer with a v nose front. Do you make a cover for this trailer? The walls of the trailer are 6 higher than normal.Thank you,
Etrailer Expert
Reply from Chris R.

We likely have something that will fit well, but I would need to know the overall size of that Featherlite to be sure. Can you tell me how long the trailer is (excluding the tongue that extends from the V-nose)?

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>