Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(218 reviews)
Price: $203.79
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$220.09
Our Price: $203.79
You Save: $16.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (218)
- Q & A (0)
- Photos
- Used (1)
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (218 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: James 05/20/2024
Ordered these for new camper. Very easy to install and does the job without the high cost of frame mount.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: dave07/08/2016
Its a good product for a light camper. I personally would not use it on anything heavier than 1000lbs. But then iam not an engineer. I sold mine and my camper and bought frame mounted tie downs
Dave
7/11/2017
Did not work for me. Tried to send them back but shipping would cost a bundle so i would get less than half of what i paid. Sold them same day on-line. Not good for a larger camper.
Rachael H.
7/12/2017
25
218
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Brophy Camper Tie Downs that Fit 2016 Ford F-150 Short BedAccording to my contact at CR Brophy Machine Works, their # HSSF truck bed camper tie-downs are compatible with the 2016 Ford F150. You'd also need the hardware package, part # TDHP, which includes the hooks, turnbuckles and lengths of chain to connect the tie downs to the camper. The # HSAB will not fit your truck.
view full answer... - Will the Brophy Camper Hold Downs Fit on a 2007 GMC Sierra New BodyYes, the Brophy Camper Hold Down, # HSSF, will work on your 2007 GMC Sierra 1500 Crew Cab. This is a universal fit item and will support any size camper that is designed to fit your truck. The hold downs will wrap around the bed rail and mount inside the bed. If you have a bed liner that blocks the inside edge of the side rail, then you may need to modify the bed liner to fit this hold down. I have attached a photo showing how this hold down installs on a truck. You may also be interested...
view full answer...
- Which Brophy Camper Tie Downs Fit 2019 Nissan TitanBrophy tie downs, # HSSF, will work well for your 2019 Nissan Titan. The Brophy tie downs don't have a specific vehicle fit list but this is the kit we've found works best on import truck beds. The part # HSBP would not be the kit I would recommend as Brophy has told us it does not fit import trucks well. This setup is rated for use with any camper that fits the bed dimensions of your truck so it would work well with yours. I also recommend hardware package # TDHP to secure the camper...
view full answer... - Will the Brophy Camper Hold Downs # HSSF Fit on a 2012 Chevrolet Silverado 2500HD Long BedThe Brophy Camper Hold Downs, # HSSF, are a universal fit item that were designed to fit many different trucks, including your 2012 Chevrolet Silverado 2500HD Long Bed. We have not had the chance to test fit these hold downs on a 2012 Chevrolet Silverado 2500HD long bed at our facility yet, but we have successfully installed these hold downs on previous generations of GM trucks. We have also had customers install these hold downs on GM trucks that have the same body style as yours without...
view full answer...
- Camper Shell Hold Down Recommendation for a 2013 RamIn order to determine if the camper shell from a 1997 Dodge Ram could fit on a 2013 Ram you will need to measure the dimensions of both truck beds. If the dimensions are the same then the camper should fit on either truck bed. Without knowing more information it's hard for me to be any more helpful. If you need camper hold downs the part # HSSF and the hardware kit part # TDHP.
view full answer... - Camper Tie Down Recommendation for a 2003 Toyota TundraFor your 2003 Toyota Tundra you would want the Tie-Downs part # TDSF. We had a customer use these on his 2005 Tundra (same generation as yours) and let us know that they worked very well for him. The # HSSF that you referenced is a universal kit that could work for your truck, but we don't have fit information for this kit so your best option would be the # TDSF since we know it would work for you. You also will want the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Are There Camper Tie Downs For A 2024 Nissan Titan XD?Hello Jerry, I am sorry to say that we do not offer any custom fitted camper tie downs for a 2024 Nissan Titan XD. We carry both the Torklift and Happijack brand tie downs and neither of these manufacturers make anything for this vehicle. It may be possible to use some universal no-drill bed-mounted tie downs like the Brophy # HSSF, but we have not tested for fitment so we cannot confirm that they will work. I have linked the review video and installation instructions below if you want...
view full answer... - Economically Priced Truck Bed Camper Tie-Down RecommendationFor a more economical option we have the Brophy camper tie downs, but they are not frame mounted. They are bed mounted. The Brophy Camper Tie Downs, part # TDSF, are a universal application for full-size trucks and they will fit your Ram 1500. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length. If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down....
view full answer... - Brophy Camper Tie Downs that Fit 2012 Ford F-250Yes, the Brophy camper tie downs part # HSSF that you referenced are a fit for your 2012 Ford F-250 and will work well. You'll also want the hardware kit part # TDHP to secure the tie downs to your camper.
view full answer... - Will Brophy Camper Tie Downs Fit a 2007 Dodge Ram 1500 with Spray-In BedlinerIf you do have 2 inches underneath the bed rail then you can use the Brophy camper tie downs # HSSF on your 2007 Dodge Ram 1500. I also recommend hardware package # TDHP. If you do not have the necessary clearance then the best option is going to be custom tie downs that attach to the frame. I have included a link to the custom tie downs for your truck. Use the drop down menu to select the version that describes your truck to see the options that fit.
view full answer... - Will Brophy Camper Hold Downs Scratch Paint of VehicleWhen installed the Camper Hold Downs part # HSSF that you referenced would not contact the sides of your truck bed so you wouldn't have to worry about them scratching anything. When used with the hardware kit # TDHP the camper will be adequately secured to the bed of your truck. Frame mounted hold downs would provide a stronger attachment point. But at the same time we have had zero issues with the Brophy hold downs allowing the camper to slide out the back of the truck.
view full answer...
- No Drill Camper Hold Down Recommendation for 2015 Chevy Silverado Bed RailThe Brophy Camper Hold Downs part # HSSF is a bed mounted camper tie down that doesn't require any drilling to install. I attached an install video for you to check out as well. You will also need the hardware kit part # TDHP to secure the camper to the # HSSF.
view full answer... - Difference Between The Brophy Camper Tie-Downs HSAB And HSSF The Brophy # HSAB and # HSSF are essentially the same thing with the exception that the # HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part # TDHP.
view full answer... - Recommended Camper Tie-Downs and TorkLift Trailer Hitch for 2018 Ford F-350I do have an option for you, however there is not a set of TorkLift Custom Frame-Mounted Camper Tie-Downs available that will work with the running boards on your 2018 F-350 that run beneath the bed. I instead recommend taking a look at the Brophy Clamp On Camper Tie-Downs # HSSF. These are universal tie-downs that will clamp onto the truck's bed side rails to provide attachment points for securing your camper. They feature a strong steel construction with a black powder coat finish to...
view full answer... - Can the Brophy Clamp On Camper Tie-Downs Be Used On a Ford F-150 with Aluminum BedWe have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP. Although certainly...
view full answer...
- Camper Tie-Downs for 2007 GMC Sierra 2500 New Style with 6-1/2-ft BedThe correct choice of camper tie-downs for your 2007 GMC Sierra 2500 New Style with 6-1/2-ft bed will depend on whether it is equipped with running boards and on what type of hitch is installed: factory, aftermarket or Torklift. The link provided will take you to our main page for tie downs for your truck. The drop-down 'Select Vehicle Style' menu at the top of the page will let you select your particular truck's configuration to see compatible tie down kits. For example, if your truck...
view full answer... - Spring Loaded or Rigid Turnbuckles for CR Brophy # HSSF Truck Bed Camper Tie-DownBrophy recommends using their rigid tie down hardware kit, part # TDHP, as their tie downs provide a small amount of flex.
view full answer... - Which Brophy Tie Downs Will Fit a 2002 Dodge Dakota? When we are unable to measure we recommend going with the larger Brophy Tie Down # HSSF which has a 5-7/16" measurement from the lip to the bend. The Zinc Plated # HSBP one you found has a 5" measurement from the lip to the bend. We have not attempted to fit these on a Dakota in our shop and Brophy builds these as a universal option and only has to do a redesign when the market changes which is why you see wider options since the rails have gotten wider on newer trucks.
view full answer... - How to Determine if the Brophy Clamp On Camper Tie-Downs # HSSF Will Fit a 2008 Chevy Silverado 2500The Brophy Clamp On Camper Tie-Downs # HSSF are actually a universal item so there isn't really a "fit guide" for which pickups that it fits. I did add some pictures of the dimensions as well as the installation instructions though so that you can compare what your 2008 Chevy Silverado 2500 bed side look like to determine a fit. If you find that these will not fit your Chevy just let me know and I can help you find one that will work for you.
view full answer...
- Comparing Brophy Truck Bed Camper Tie DownsOn the ends of the Brophy tie downs # HSAB where you would tie off the camper the tip is turn up to be parallel with the ground. The angled design allows more clearance between hold-downs and truck fenders.On # HSSF the tips are not turn up and are at about a 45 degree angle. For either kit I also recommend the associated hardware package # TDHP.
view full answer...
- Do Brophy Clamp On Camper Tie-Downs Have A Weight CapacityThere is no weight capacity for the Brophy Clamp On Camper Tie-Downs # HSSF. The tie-down hardware kit # TDHP, that is used to secure the camper to the # HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will handle the camper and the concern would be if the truck capacity was not able to handle it, but with an F-350 you should have no issue. Since the front tie-down is behind the camper tie-down, the rear tie-down must be forward of the camper...
view full answer... - Recommended Camper Tie-Downs for 2016 Toyota Tundra with 6-1/2 Foot BedFor your 2016 Toyota Tundra with a 6-1/2 foot bed, I recommend looking at the Brophy Clamp On Tie-Downs - Bed Mount # HSSF. These are a universal fit that will work great on your Tundra as long as the underside of the bed rail lip is at least two inches wide. I have attached an image that shows the space that is needed. This will include 4 camper tie-downs, 12 neoprene pads and the necessary hardware. I recommend adding the Brophy Basic Turnbuckles # TDHP that will include the turnbuckles,...
view full answer...
- Difference Between The Brophy Tie Downs TDSF and HSSF For a Camper Towed By a 2000 Ford F-150I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where as part # HSSF mounts over the sidewall of the truck bed. Also, part # HSSF is ok to use in trucks with spray-in bed liners. If your truck has a drop-in bed liner, it...
view full answer... - Will the Brophy Camper Tie Downs # HSSF Fit a 2013 GMC Sierra 2500 Long BedAs long as your 2013 GMC Sierra 2500 does not have a step side bed, double wall bed, and is not a dually, then you can install the Brophy tie downs, # HSSF. I also recommend the hardware package # TDHP to help secure the camper. I have included a link to the installation instructions for you.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.