Video Transcript for A Closer Look at the TorkLift Camper Packer Camper Stand Kit with Lumber

Hello everybody. This is Jeff with etrailer.com. Today we're gonna take a look at this TorkLift Camper Packer Camper Stand Kit with the included lumber. Now this will easily and safely store your truck bed camper by using this kit to build a nice sturdy stand. And pair the supply brackets right here, with the included two by six size lumber. And as you can see it creates nice two sawhorse type supports.

Basically this camper stand will help support your truck bed camper when it's in storage. And what's nice about it'll prevent any camper frame damage by redistributing the stress off the four corners of the camper frame and onto this stand. It helps extend the life of your jacks by dramatically reducing wear and stress. Basically what you end up doing is taking these two sturdy trusses put 'em beneath your camper. It supports its weight when it's removed from your truck bed.

The weight capacity on this is 6,000 lbs per pair of stands. This will give you a nice, safe, short and long term storage solution. And this kit will include everything shown here. Now we've attached this. When you do get this kit, you would have to put it together.

Comes with a nice set of instructions. But it is very simple to do. We've already assembled it. Just to give you an idea what it looks like. This kit will include these leg brackets right here.

With the pins and the clips that hold it in place. It includes the foot plates right down there at the bottom. The foot plates come with the chains. You can see at the very bottom, they have a chain, and then quick links between the legs there. And it comes with all the hardware for attaching the lumber to the brackets. Now the lumber that's included, it'll come with these two 50 inch long two by six pieces of wood to create these support beams. And it'll come with eight, you can see, of the 30-inch long two by six pieces of wood for the legs. And what's nice about this that is designed to fold up for compact storage when not in use. What you would do is take out the pin and clip on this side just like that, and take out the pin and clip right over here. And then hook with those out, you can see this beam right here is not really attached any other way. You can just lift this up and then lift that end up and remove this whole support beam. And then these two legs would fold up in position, and you could store 'em away. So it comes apart pretty easy. And then when you go to put it back in, just open those up, slide your support beam down there, lines your hole up with your pins, and then just slide your pins right back through there. Put it in there, just like that. And you can see your pin go all the way through, and then you clip it on the other side and you'll do the same on that end. Now these brackets are powder coated steel brackets that resist corrosion. Now the dimensions on these supports when they're assembled just like that with the lumber in them, the overall height from the floor up to the very top is gonna be 35 inches tall. The width on the support being up there is 50 inches long. Now you can get this kit also with just the brackets and you could supply your own lumber. And we do sell that separately on the website. It's part number TLA7010. But that should do it for the review TorkLift Camper Packer Camper Stand Kit with the included lumber..