Video Transcript for Detailed Breakdown of the Taylor Made Jaw Slides for 3/4" Bimini Top Poles

Today, we're going to take a look at the Taylor Made Bimini 00:00:03 top jaw slides for the three quarter inch diameter poles. It's for a quantity of two. Now these Taylor Made jaw slides will allow you to securely connect your Bimini top support poles to properly support your top in the open position. It does require external ions on this end to connect your support poles to the jaw slides. Those external ions we do sell separately on our website and they're listed on this product page as a related product. Basically you remove this large Phillips screw right here.

Put your ion in there, put the screw back in, tighten it down, it'll hold them together.This is designed to fit the Bimini support poles with a diameter of three quarters of an inch. They are black nylon construction. It is for a quantity of two jaws slides. Last thing I want to do is give you some dimensions on this, the overall length on it is two inches. Overall width at the widest point is right at one inch.

The inside diameter where the pole goes is three quarters of an inch, and the overall heights on this is right at one inch. Now they do have the Allen set screw. This will hold the jaws slide to the upright pole, so you just loosen that side this on the upright pole and then tighten it down to hold it. But that should do it for the review on the Taylor Made Bimini top jaw slides for the three quarter inch diameter poles for a quantity of two.