# 1
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
# 2
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
I would like to tell you about my experience with etrailer.com. I am a return customer because I always find what I need at reasonable prices, quick and inexpensive shipping charges. I ordered this for a 1999 GMC Safari to fit my new Draw Tite hitch. I use it for my bike rack which fits like a glove. I highly recommend etrailer.com. I feel they are a very good company to deal with because I get personal service which is uncommon these days.
# 3
Hitch Extender For 2" Trailer Hitch Receiver 7"
I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.
Good quality, heavy duty took a couple extra days to get here otherwise great product
# 4
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
This is the only hitch I could find to fit the Polestar 3/ Volvo 1-1/4" hitch pin hole alignment.
Seems great, should have come with hitch pin
# 5
Malone 2" Dual Purpose Hitch Receiver
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
I purchased this product from Etrailer instead of other online sources because I trust them having products that they stand behind. In looking at ratings from other sites made me question quality.
# 6
Hitch Extender for 2" Trailer Hitches - 8" Long
Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.
Appears to be well built and sturdy. I’m sure it will accomplish what ineeded
# 7
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
Work great! I needed an extension due to my truck camper. It holds my heavy duty bike rack and 2 ebikes with no problems.
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 8
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified
Great product. Correct fit. Arrived fast and it is exactly what we were looking for. Thank you.
# 9
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
Swing away is built very well! Easy to use and price was good. Should have bought it along time ago.
The Yakima swing arm provided just what we needed to allow the use of the Hollywood RV Rider bike rack behind our 2023 Wrangler JL.
# 10
Curt Extender for 2" Hitch Receivers -18" Long
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
Works great. Gives me the space I need to swing my Jeep's tail gate open further so I can access the rear cargo area. One thing that would make it a five star would be safety chain rings welded on so I didn't have to buy more chain to extend the already very long chains all the way to the bumper, which leads to a lot of chain dragging on tighter turns.
# 11
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger's Side
This is going to be great to be able to swing out bikes out of the way so we can get in the back of the jeep.
I recommend etrailer. Customer service helped me get the bike rack and swing away to fit my needs. The Pivot 2 works wonderfully when it’s not broken. First the release latch stopped working within a month-Kuat customer service replaced it. Then there was a 1.5”split in the steel where the bike rack slides in, (it could have been a very tragic outcome had I not removed my bike rack when I did).Kuat customer service would not give me a refund but they did replace it with another one. Here’s hoping third one is the charm. Note: I went directly through Kuat when I had a problem not etrailer. I didn’t give etrailer the opportunity to make it right because I was traveling and felt as though the manufacturer would get me faster results. I’m not sure if that was the best decision.
# 12
Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches
Built very strong, easy to install and operate. Using with Thule Apex XT 2 bike rack.
Love it! It swings out of the way so I can get the back door open. The other advantage is it allows the back door to be open a few inches at night (when the hitch is in the locked position) for airflow when it’s hot.
# 13
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Outstanding service
# 14
RockyMounts Hitch Extender w/ Hitch Pin and Lock - 2" Hitches - 8" Long
Easy installation, install and forget.
I bought this hitch extender to move my Swagman bike rack further away from the back of my trailer because the bike handle bars were rubbing against the trailer. I chose this extension because of the anti-rattle pin to better secure the hitch during transport. This extension moved the bikes far enough away that the handle bars no longer rubbed against the trailer. It also allowed the receiver to be centered on the back of the trailer because the bike tires no longer interfered with the spare tire on the back, provided clearance to access the city water connection with the bikes still loaded, and provided better visibility to one of the rear taillights since the receiver could be moved to the center of the trailer. After a 2,000 mile journey, the pin never came loose and the bike rack on the extension rode smoothly. This extension solved many issues i was having with the bike rack on the back of my trailer.
# 15
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
Great product, simply gets the Job Done!! Spare tire on Jeep Rubicon, no impediment, no problem!!
Great customer experience. I had issues with my address and Kurt and the team for and solution. Also great to resolve on a Saturday.
# 16
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
The quality of the hitch adapter looks great and very stout.
Just the trailer hitch adapter we've needed with the 5" rise. Thank you!
# 17
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
This is a much higher quality (thick and heavy) than I imagined it would be; I'm pleasantly surprised. I'll be using it to mount a trailer hitch cargo carrier and a dog step at the same time when we go on long vacations.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 18
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side
Not super happy with it. It held two ebikes total of 100 lbs and the metal piece that holds the tube in the hitch fell off. I fixed it but, i'm hesitant to use it with my multi-thousand dollar bikes
This is a very high quailty-made item. Very well packaged also. It would have 5 stars but no matter how I try. I cannot remove the sloppy fitting with the adjustment screw. I have a standard 2 inch receiver. On all the advertisement videos, it looks easy and the adjustment screw turns easily. Mine sounds like a squealing pig when I turn it. I even looked through the other end and can see it’s greased.
# 19
Hitch Extender For 1-1/4" Trailer Hitch Receiver 10"
I recently had a hitch installed on my car. Since the cargo carrier that I have was used previously without an adapter, I assumed that I didn't need one. Now trying to locate one was more of an effort than locating a hitch. The local auto parts stores of national brands don't keep them in stock. One store made an inquiry but didn't give me much hope. Now I can make a rode trip in confidence that the carrier will be secure as I head down the interstate.
Quality product and excellent service from etrailer.com! The Hitch Extender works well allowing me to back my boat trailer further into the deeper water.
# 20
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.
Great product
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"