# 1
Curt Extender for 2" Hitch Receivers -18" Long
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
Works great. Gives me the space I need to swing my Jeep's tail gate open further so I can access the rear cargo area. One thing that would make it a five star would be safety chain rings welded on so I didn't have to buy more chain to extend the already very long chains all the way to the bumper, which leads to a lot of chain dragging on tighter turns.
# 2
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
# 3
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Was looking for a way to carry 2 e-bikes on a Hollywood rack, and tow my Jeep, behind my Class A RV. This dual hitch looks like it will do exactly what I want, at least when doing my test set-up. Only reason I didn’t give it a 5star is because when the rack and Blue Ox tow bar were installed, there was significant “slop”. I resolved this problem by buying an adapter at the local hardware store, and it is now tight as it should be.
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
# 4
Hitch Extender For 2" Trailer Hitch Receiver 7"
I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.
I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.
# 5
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 10K GTW, 400 lbs TW
Ordered exactly what I needed to lift my tow bar !!! Love that etrailer carries roadmaster products
Works well on my 2014 Wrangler Unlimited. Yakima Swing Daddy - 4 bike rack. I am able to open the gate completely until it locks.
# 6
Malone 2" Dual Purpose Hitch Receiver
One year of ownership and several road trips of use - This hitch adapter has been great for letting me carry more gear (specifically my bikes on a rack) along with my trailer. I'm very happy. Well worth the money spent. I will note one thing: be diligent about measuring and calculating how your gear racks will stick out from your vehicle with this. The clearance on my bikes to my trailer was exactly enough on a turn. If my trailer was 2 inches closer and it wouldn't have worked.
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
# 7
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
Work great! I needed an extension due to my truck camper. It holds my heavy duty bike rack and 2 ebikes with no problems.
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 8
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
Great product, simply gets the Job Done!! Spare tire on Jeep Rubicon, no impediment, no problem!!
Great customer experience. I had issues with my address and Kurt and the team for and solution. Also great to resolve on a Saturday.
# 9
Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches
Love it! It swings out of the way so I can get the back door open. The other advantage is it allows the back door to be open a few inches at night (when the hitch is in the locked position) for airflow when it’s hot.
Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built
# 10
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Easy company to order trailer hitch parts from. Quality and precise fit as advertised in their easy to use online shopping guide.
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
# 11
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.
Appropriately heavy for the job!
# 12
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger's Side
I recommend etrailer. Customer service helped me get the bike rack and swing away to fit my needs. The Pivot 2 works wonderfully when it’s not broken. First the release latch stopped working within a month-Kuat customer service replaced it. Then there was a 1.5”split in the steel where the bike rack slides in, (it could have been a very tragic outcome had I not removed my bike rack when I did).Kuat customer service would not give me a refund but they did replace it with another one. Here’s hoping third one is the charm. Note: I went directly through Kuat when I had a problem not etrailer. I didn’t give etrailer the opportunity to make it right because I was traveling and felt as though the manufacturer would get me faster results. I’m not sure if that was the best decision.
Excellent product, solidly built and easy to install. I was hesitant because of the full size spare tire on the back ladder. The videos and the specifications (especially the sizing details) gave me all the info I needed to make the decision to install it on my Sprinter. The swing away rack gives me full access to the rear of the vehicle. I wish I had bought it sooner.
# 13
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension.
# 14
RockyMounts Hitch Extender w/ Hitch Pin and Lock - 2" Hitches - 8" Long
Delivery was fast, packaged very well, and the hitch extension is really well made. It is perfect for getting my bike rack away from my rear door to allow access to the back of my Forester. Impressive construction. I will recommend it to others.
I bought this hitch extender to move my Swagman bike rack further away from the back of my trailer because the bike handle bars were rubbing against the trailer. I chose this extension because of the anti-rattle pin to better secure the hitch during transport. This extension moved the bikes far enough away that the handle bars no longer rubbed against the trailer. It also allowed the receiver to be centered on the back of the trailer because the bike tires no longer interfered with the spare tire on the back, provided clearance to access the city water connection with the bikes still loaded, and provided better visibility to one of the rear taillights since the receiver could be moved to the center of the trailer. After a 2,000 mile journey, the pin never came loose and the bike rack on the extension rode smoothly. This extension solved many issues i was having with the bike rack on the back of my trailer.
# 15
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side
This is a very high quailty-made item. Very well packaged also. It would have 5 stars but no matter how I try. I cannot remove the sloppy fitting with the adjustment screw. I have a standard 2 inch receiver. On all the advertisement videos, it looks easy and the adjustment screw turns easily. Mine sounds like a squealing pig when I turn it. I even looked through the other end and can see it’s greased.
Love the rack and the folks at e-trailer got it to me remarkably fast. Everything looked great set up for the most part. The directions were very clear and it required minimal effort.
# 16
Buyers Products Hitch Extender w/ Step - 2" Hitch - 12" Long - 17" x 6-1/4" Step
great product. perfect fit to extend our hitch and utilize our bike rack. the step up is very helpful.
Perfect for my needs. Heavy duty and well made. Allows me to reach items further back in the truck bed or to climb off the bow of my boat onto the step.
# 17
Thank you for the 1 5/8ths - 2 inch adapter. This product is not easy to find. Shipping was fast, and fits great. Fantastic follow-up all the way from shipping to receiving. Will be shopping with you again.
Doesn’t fit
# 18
Reducer Sleeve for Super Titan Hitch Receivers - 3" to 2"
I ordered this 3 inch to 2 inch hitch reducer because I had purchased a new RV and the receiver on the new RV is a 3 inch hitch. My previous RV hitch size was 2 inch. I needed a 2 inch receiver because I am re-using my Blue Ox tow bar which has a 2 inch hitch. Fit perfectly. See pictures.
This does NOT fit '17 Ford F350 built Jan '17. My F350 6.7l has a 3" receiver with a 5/8" hitch pin. This adapter has a 3/4" hitch pin hole. If indeed 3" receiver standard is 3/4" pin, then Ford messed up. Otherwise Reese is at fault.
# 19
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
# 20
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.
This adapter allows us to use a bike rack we have across all our cars. It is perfect for light duty applications, easy to use and it can be stored in the trunk until you need it. I would definitely recommend it.
DIY Install: Yakima EXO SwingBase Swing Away Hitch Extender on your 2021 Toyota 4Runner
Hi, everyone. Aiden here with etrailer.com. And today we're gonna be taking a look at the Yakima EXO System with cargo carrier and bike rack here on our 2021 Toyota 4Runner. Now, the EXO System is a really awesome modular system that you can customize and change over time. We've got it with the cargo basket on the bottom and the bike rack on top, but there's tons of options in terms of what you can mix and match. You can do two baskets.
Fit Test: Yakima Exo System Swing Away Hitch Extender on a 2015 Toyota 4Runner
Hey, everybody. Zach here at etrailer.com. Today, we're taking a look at the Yakima EXO System with the TopShelf on our 2015 Toyota 4Runner. Now, this is it in it's base stage. And I just wanted to give you guys a good idea as to how quick it is to swap all your gear out. So whatever configuration you decide to go with, it's really easy to get gear swapped out.
What our customers are saying:
"Ordered the part on Saturday and had it by Wednesday. $35-$75 cheaper than I could find anywhere else. I plan on using this site again."