# 1
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
Product was delivered on-time as expected. This adapter is being used on a Volvo XC60 with a retractable receiver. Although it fit in the receiver the locking hitch pin did go all the way thru without a little brute force. Not sure if it is a receiver, adapter, or a hitch pin problem. Would have been nice to have a little more guidance.
The product is definitely highest quality! You can feel it when you hold it in your hand. It has to be the best adapter 1 1/4 to 2 inch
# 2
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
Purchased to use with a hitch bike rack. It has held up to a 52 pound rack carrying 45 pounds of bikes.
The quality of the hitch adapter looks great and very stout.
# 3
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
I purchase this to use with a Thule bike rack. The Thule rack requires a 2-in receiver so this should have worked. However it's so shaky and loose that I didn't feel comfortable driving it down the street. I should have returned it but I went back to using another vehicle I have with a 2-in receiver.
Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.
# 4
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Sits fairly loose in the 1 1/4" hitch receiver. Also didn't come with a hitch pin, so you have to buy that separately too.
# 5
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
# 6
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Super fast delivery. Fits 2” receiver. Very nicely painted to prevent rust. I’ve ordered many things from Etrailer and the delivery is always fast and products are just what Etrailer say they are.
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
# 7
Hitch Extender For 2" Trailer Hitch Receiver 7"
I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.
Good quality, heavy duty took a couple extra days to get here otherwise great product
# 8
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
2” or 4” up/down is the solution I needed for a flat tow, 4” lower drop and a 2 bike rack, 2” rise. Very well constructed and looking for years of service out of this drop/rise combination!
Wanted to be able to combine tow hitch and bike hitch. This required a 2" drop and a 4" rise with a 10K lb capability. Etrailer.com came thru with product, price, special free shipping, and great customer service. Ordered on Sun and received on Wed and installed on Thur and ready to go!
# 9
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We used this to be able to take our golf cart in the bed of our truck while pulling our travel trailer. This extender allowed us to have the tailgate down for the golf cart. It worked perfect and even had a couple people come up to us wondering how we were able to bring our golf cart. Before this we had to take 2 vehicles or just not take the golf cart.
Works great!
# 10
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
Did the job
# 11
Curt Hitch Extender for 2" Hitch Receivers - 8" Long
The product is 5 star, packaging and shipping is a 0. I am not sure how this hitch extender ever made it to my residence due to the lack of proper packaging (see photo.) When the package arrived, I did not need to open the box, I only had to reach throught the hole and pull it out. This is not the first time I've had issues with etrailer packaging. When I ordered the extender, the screen showed I would receive it Saturday. Received it 3 days later.
I use this on my Yamaha Kodiak 700 and it works great with my cargo carrier. I needed an extender in order for the carrier to not rub against the back tires. No complaints.
# 12
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified
The adapter seems to be of very good quality. Before looking at etrailer I'd been having a hard time finding adapters that had both the 5/8" hole (#3 pin) for attachment to my 2" trailer hitch, and a 1/2" diameter hole to attach the 1-1/4" bike rack. Some just had one size holes, others had terrible reviews. The fit is good, though there is some wiggle room. From all the reviews I've seen, ALL adapters have some movement, and the only solution is adding a locking collar, which I may do after I've tried it for a while (I just got it today). Bottom line, I'm happy with my purchase.
# 13
Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long
Works Perfectly!...nice and snug for my thule 2 bike rack>
Use it to allow me to use my bike rack on my pickup truck
# 14
Trailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L
Every thing worked as planned for a 2" bike rack. One thing I have looked for and not found at you site- an alternate for a 4 pin trailer electric connector that make is easier to connect. Just dielectric grease does not help
Work well to adapt my heavy duty two bike rack that holds electric bikes to the lighter receiver on the Hyundai Accent. Happy with the performance.
# 15
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side
Shipped ahead of schedule in excellent condition. Kuat Pivot is built extremely well, heavy duty, and looks sharp.
I am very happy with this purchase. The swing out is well constructed and appears to be very durable. Other product reviewers comaplained their swing out would bend under pressure. I cannot envision this swing out every doing that. I like the FlatLock hitch feature that tightens the swing out to hitch connection.
# 16
Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches
this is exactly what I have been needing, don't know why I waited; Could never open the rear doors of the RV van w/ the bike rack mounted - always had to remove the two eBikes (and the rack unless I want to shin into it several times); Now - simple-pimple, the Saris Swing Away swings out to the right - and boom, easy access to the doors to get inside the rear of the van, for supplies. I love it!
Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built
# 17
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
Overall, I like the design and the build quality and the paint job. However Yakima should fix the following issues.. 1) the mounting/locking bolt is 23mm. Not a common size wrench people have laying around. They could have provided a crude wrench that fits this bolt. 2) secondly and more importantly the Jesus clip that fits over the pin that mounts the clasp flew off and bent when I operated the clasp. It happened a second time when I used the spare Jesus clip. The solution was to insert the pin in the opposite direction and install the clip on the opposite side. Still, there is a chance that the clasp could hit the Jesus clip on that side too, so I'll just have to be aware when operating the clasp to make sure this does not happen. I will probably come up with some type of spacer that centers the clasp buckle so that it clears the Jesus clip, I just haven't had time to look into it in any detail yet.
From purchase to delivery went well excellent job to all. God is great I give him all the praise for helping me get this done. I was in an accident which damaged my swing away hitch and Hollywood rv back rack.these are built very well I would recommend.
# 18
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.
Works great. We're towing a jeep and have a bike rack behind our motor home.
What our customers are saying:
"very easy to shop"