Most Popular LED Light for 2021 Jeep Cherokee

They are great! Everything was in there for putting them on! Will be ordering from them again! Thank you E Trailer!

Installed the new lights today. Easy peasy. I grew up on a farm, in the country, and have been fixin' and futchin' with trailer lights since I was 6, it seems (I'm 74 now). Hopefully this is the last time I'll need to fix the lights on this particular trailer.

Fit perfectly where the old lights were. Perfect replacement.

Installed the new lights today. Easy peasy. I grew up on a farm, in the country, and have been fixin' and futchin' with trailer lights since I was 6, it seems (I'm 74 now). Hopefully this is the last time I'll need to fix the lights on this particular trailer.

Fit perfectly where the old lights were. Perfect replacement.

I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services! My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.

Great addition to the basic, rear brake lights of a camp trailer. I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning. These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!

POS used by Thor to make you purchase a $[XX] plus hunk of plastic to replace a fifty cent light bulb! What [bull]. Warren Buffet screwing the little guy.

Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.

I found that the travel trailer OEM tail lights were blocked by the cargo carrier. I installed these light as an extension of the OEM tail light. These lights enhanced the OEM lights. Now I worry a bit less about the vehicles behind me.

Super clean look. Installed these on my boat trailer that just went through a complete restoration.

These were designed as a clearance light application and at a great price. I bought them to use as turn signal lamps on my RZR. They are high quality and extremely bright when lit, so they work great for both applications. These guys have great parts at a great price and quick shipping. I would recommend them to anyone needing trailer/boat/lighting. Thanks guys.

I actually purchased these lights to use as a side marker light on my Jeep Wranglers after installing after market fenders. Lights have worked fantastic up to this point

Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.

I bought this light about a year ago. It's a quality product for a fair price and was exactly the right item I needed for my trailer repair. I will go back to etrailer again for any future trailer parts I need.

Wow, what a difference LED clearance lights make, especially at night. It makes my business information really stand out and people who follow me really notice that. I've been wanting to go LED the past couple years and now that I recently made the change, I'm not ever going back to standard low-level light bulbs again. Thanks etrailer for offering these lights and at a very affordable price. You were almost half the price as our local part store was selling them for, plus these are more stylish as well.

These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--

It was a direct replacement for a damaged tail light and works perfectly.

LED trailer tail lights are the only way to go for good lighting! I’ll definitely come back to ETRAILER for my future trailer supplies!

etrailer delivers again. Exactly what I expected. After two hitches and several other items, etrailer has become my “go to” all my towing/trailer needs. The generous length of the wiring is appreciated as these lights will be installed so the lights and wiring can be removed & installed in just a few minutes. This trailer is used infrequently and removing the lights and wiring is the only way I can keep the squirrels from chewing the plastic!

Fit my boat correctly, worked properly, has a lifetime warranty.

Always look forward to getting parts from etrailer. Shipping is decent and parts are as described.

My two year old yacht club trailer side marker lights had a mind of their own and would inadvertently decide to energize or not. The bulbs could not be replaced as these were a one piece unit.I ordered two LED marker lights from etrailer and after replacing the incandescent fixtures I haven't had an issue. I predict my rear lights being next.

This light was exactly like described. I purchase a lot on line and use amazon prime for free shipping. I could not find this light on amazon and was very impressed that etrailer.com had very reasonable shipping prices. Instead of gouging the cost was in line what normal shipping cost would be. The shipping and tracking were spot on and the lights were delivered as promised. A VERY good company to work with.

I bought these lights for a boat trailer. They are very bright and we're easy to install. I would recommend to anyone looking for replacement lights

Great service. I ordered this item on a Sunday and by the evening it had shipped. Really good communication and the items arrived in a few days. The item was exactly as described. great quality. Haven't installed them yet.

I bought this to replace the third high mount brake light on my 4 Runner. I wanted a brighter light due to the large number of drivers on cell phones and not paying attention to traffic. This light is at least 8 to 10 times brighter and is absolutely perfect. I mounted it directly on top of the existing light and just drilled a hole through that light to run the wires. I used two sheet metal screws to secure it to the frame and filled the open space in with clear caulk. I did not use the existing mounting hole because I wanted to aim the light into the face of the driver behind me. Seriously, we have a real problem with drivers on cell phones. Shipping was fast. I was stunned that the light was packed for shipment in 3 hours on a Sunday morning. You people should really take Sunday off.

Optronics makes really good trailer lights. They don't survive me backing my cattle trailer into poles, but that's my issue. My cattle trailer is 20 years old and originally came with old school bulbs. But Optronics makes LED replacements in the same form factor so I have upgraded as I break them. Nice to know I can still get newer LED bulbs for fixtures that are 20 years old. That's what you get with a company like Optronics. And, etrailer has the best technical descriptions and videos available so I know what I'm getting and that they will fit.

The lights work perfect, very pleased with my purchase

Perfect fit, matches the driver side. Delivery was on time, instillation was easy. Thank you guys and gals at etrailer! I'm ready to head for the lake again!!

I am totally satisfied with the new Optronics LED replacements for my 2001 RangerTrail. The new lights are approximately a couple of weeks old and they are replacing sealed Wesbar lights. The LEDs have been in and out of the water about 7-8 times with no issues. I can tell you the new LED lights are a lot brighter and crisper than the original lights and throw more light down the road when driving at nighttime. Installation was mostly a breeze. The only issue was I had to re-drill one hole on the RH side because the factory holes were off by about 1/4 inch vertically. Drilling a new hole through the fiberglass allowed the new LED fixture to fit nicely into the cutout of the trailer. No issues with the LH side. I definitely plan to purchase more LED lighting in the near future from etrailer.com as I look to replace the other running lights on the trailer. I highly recommend Optronics LED lights for anyone who plans to upgrade their old, bulb-style lighting. The pictures I have attached are with the running lights on. No brake lights depressed.

Bought these LED Stop/Tail lights for my new dump trailer. The factory stop/tails are mounted very low, and any car directly behind me blocks my lights from the 2nd or 3rd car behind me. So I mounted these new ones up as high as I could to let people know I am stopping or turning. I also mounted a side marker light so I could see where the trailer was while backing up at night. The factory marker lights are so low I can’t see them in my mirrors because they are blocked by the step on the drivers side and the spare tire on the passenger side. I am a retired 18 wheeler driver of 47 years.

I am in the process of renovating a 1966 Airstream. I wanted to upgrade the tail lights and the clearance lights. I found etrailer.com on a web search. I ordered the round 4" LED, rubber 4" grommet, and Oval LED clearance light. The round stop with grommet adapeted perfectly into the lens on the Airstream. I will feel so much safer now with the added visability. The lights are stellar.

Great replacement for a set of older incandescent style lights. Far far brighter, super easy install, larger size let me pretty well cover the existing holes from the old rectangular lights. Does have a license plate holder but those are usually pretty brittle anyhow. I just got a flush mount plate bracket which looks better.

Wow very nice quality. Very bright and looks great on my vintage Shasta. Also Etrailer customer service is wonderful!

These small amber marker lights fit my old existing incandescent light trailer mounting holes perfectly!

Before installing these marker lights on my boat trailer, I touched the power wire and ground wire to the terminals on my truck battery. This light is at least 2X brighter and more vivid than the older LED lights that I am replacing. The older lights had a very suspect push on connector that would rattle off from road vibration. These Optronics have a sealed, through the back, power and ground wire. Far better!

The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn

Much brighter than my previous tail lights. Easy to install. Would definitely buy again!