Best 2020 Ford Ranger Ladder Racks

Very easy to put together, seems sturdy and well made.

Very well built, heavy duty, high quality.

They look decent enough and do exactly what I need. Super easy install. I think I'll be able to remove the rear one(4 nuts with a zip gun) slide my KLR 650 in the bed put the rear one back on load the canoe and scoot down the highway in my 2011 Ranger. Super happy with these at this price point.

I used the ladder rack as part of my roof top tent trailer build. The rack is awesome. I was able to install it so the top is further apart than the bottom so the tent would attach properly. Very well made. And as usual the customer service was excellent. Thanks Hally C.

The quality and ease of installation was great. Very nice rack!!!

Easy website to navigate, great help videos that made the buying decisions and the installation seamless.

Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage. The installation instructions were clear and simple to follow. I’m very happy with my new rack system

Rack has been stable with a 250# RoofNest tent installed.

Install wasn’t horrible but I can’t imagine removing it often. The stops naturally don’t slide on the rail but can be relocated without tools which is nice. Seems sturdy. The cons, it’s steel and has started rusting after two weeks in places the paint wore off during install. I will have to clean it up and repaint it to keep it from looking horrible. In addition, the J bolts sit pretty far off the side of my 2007 F150 so the bracket is hanging off the rim inside about an invh. Once all together it doesn’t seem to matter but would be more comfortable if it sat tight. Overall, it gets the job done but if looking for pretty, get something that doesn’t rust.

The product itself is of good quality. It is a heavy duty truck rack. They say it is adjustable but that is only if you have the wrenches with you. It took several hours to assemble it alone. The bolts need to be a little longer especially on the mounting sleeves and the top of the cross bars. The sliding mounts were quite difficult putting on as the sleeves were very tight, I recommend WD - 40. When it was to the point of installing the cross bars it was necessary to loosen the mounting sleeves and move them. I called customer service and sent several e-mails and received no responses . I plan on using it to carry my kayaks while pulling a travel trailer.

Bought this for my 2020 Toyota Tacoma and with the adapter kit (https://www.etrailer.com/Accessories-and-Parts/Thule/THXK4.html), it works perfectly for what I needed. Right now using it to haul two kayaks but eventually will be using it to haul a hardtop camper. Perfect midsize height. Very sturdy, somewhat easy to assemble (Thule instructions are pretty bare bones but once you get started it's pretty easy to follow).

It’s very well made, heavy duty. Looks good and should last a very long time. I’ve put my Yakima SkyBox 18 on it and we are ready for adventure.

I have owned this for a year now installed on my 2023 Ford Ranger and works great. Would definitely purchase from etrailer again in the future.

The rack fit well on my 2010 Ford ranger and was the perfect answer to transporting the long poles for large canvas tents for my living history group. It would be perfect for ladders as well.

Ability to raise and lower the rack is very useful. It allows me to keep the boats as low to the ground/truck cab as possible for easier loading/unloading. I can raise the rear rack and load a motorcycle without removing it. I have removed the endcaps and run straps through the crossbars and was able to load two 17 aluminum canoes at once. Note, the endcaps are a bit delicate and extremely expensive to replace!

Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.

I’ve been using this ladder rack for a year now and it has stood the test of time. I love the ability to remove the arms when I’m not using them so my tonneau cover can be closed. Highly recommended for the occasional need for a tough ladder rack.

Excellent packaging, great quality and simple to install. Should last for years.

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

The Yakima Outpost HD bed rack is great, strong and sturdy. I would recommend etrailer.com if you are looking for truck accessories. Great customer service!

I think the bottle opener feature advertised should work! I emailed about that shortly after installing the product, even sending photos, and no one from your company every reached back out to me to resolve the issue.

Easy to install

Very sturdy. Great look. Worth the $ in my opinion.

I ordered a truck rack Monday Sept 17th just after 8am pacific time. Within an hour I received an e-mail that the order was being processed. A short time later i received an e-mail that the order had shipped . I received my order on Friday the 21st. I have installed the Rack in my truck and it looks great. I am a return customer and would recommend etrailer to anyone in the market for any items they may need. Etrailer your great. Thanks for the fantastic service.

Very expensive but very high quality. Getting ready to take my Ranger with the kayaks to Florida behind my Motorhome. Tested on an expressway run before the big trip. Very stable and secure

Yakima product is very solid, as always. The T track adaptors do fit on the t-tracks on my tonneau cover on my '24 GMC Canyon. However, the Yakima t track rubber gasket adaptors do not quite fit the roll-n-lock M series XT tonneau cover I have without modification. I did have to cut down the outside of the rubber gasket as they are too tall, which forced the towers to angle in toward the middle of the truck. Once cut down it fit appropriately. Next, I had to cut the rubber gasket on the bottom of the middle of the tower, which overhangs the cover, as the cover has a lip that did not clear the rubber gasket when opening and closing. However the lip does clear the yakima towers when the rubber is removed so the cover does function normally once the rubber feet are modified. I'm sure yakima would not condone this, but it should not have functional consequences and so still fit my needs.

Service was Unbelievable. Fantastic , couldn’t get any better ther than someone driving a car from wentsville to my house. Thank you all, keep up the good work, I need more stuff.

Yakima products are renowned for their ease of assembly, installation, and sturdy craftsmanship. The BedRock HD does not disappoint in any of these categories. We bought the BedRock HD Truck Bed Rack with the hope that it would make loading/hauling our kayak and SUP more user friendly when used in conjunction with the LongArm Extension. Another factor we considered when purchasing this combo was how securely the watercraft would ride for 10-12 hours of driving time. Though we have yet to make a trip of that length, both watercraft are extremely secure once loaded and strapped down. I am able to make the truck bed sway back and forth when pushing and pulling on the strapped down SUP. I’m confident both craft will be held securely for any duration we intend to drive. Since the 2020 Toyota Tacoma with the 5 ft. bed is somewhat limited on bed space it was important for us to have a set up that would allow us to maximize our truck bed use. With the BedRock HD and LongArm combo we are able to accomplish our goal. There is 19” of clearance between the floor of the truck bed and the bottom of the HD crossbar with pad installed. Without a pad on the crossbar there is 20” of clearance. Plenty of room for our gear totes and cooler. For those interested, I installed the forward-most crossbar/tower assemblies 17.75 inches rearward of the front outside corners of the bed. The rearward-most crossbar/tower assemblies are installed 14.25 inches forward of the rear outside corners of the bed (excluding the top of the tailgate). That gave me a center to center crossbar spread of 28”. The LongArm Extension is bolted with the tee bar at its shortest configuration, and the entire assembly is bolted one hole placement from the vertical position. [See attached photos]

Best online company I've ever dealt with. Website and follow-up outstanding. Great customer service.

Box was broken on delivery I notified them and they told Me if anything was missing that they would take care of it. Come to find out everything was still there. Everything went together perfectly. Thank you for the communication. Look forward to working again with you all in the future

Rack has worked great hauling 20 foot lumber, 17 foot kayaks and standup paddle boards. The only issue I have had is the front cantilever bar over the cab is about 1" from the roof. If I hit a bump in the road it hits the top of the cab. I have a 2004 Dodge Ram 2500 Crew Cab short bed. Wish there was a little more clearance between the cross bar and cab.