Best 2019 Hyundai Ioniq Bike Racks

Perfect for my Toyota Highlander, thanks guys, great job

First rack I've ever purchased I misplaced the end bar used to lock the bikes onto the rack. Can I buy another one?

Performed perfectly on a 140 mile round-trip in my 2017 Acura MDX. It took me a few tries to position the anchors inside the top of the hatch, but I got the hang of it and the rack did not shift at all while driving 50-60 mph on the highway.

After searching for a bike rack for my 2015 Hyundai Sonata, I settled on the Yakima Fullback 3. I initially wanted a roof rack so I could carry my bikes and kayaks, but my options with the panoramic sunroof were limited and expensive. Part of the Sonata trunk lid is plastic so I was very hesitant to use a trunk mounted rack. It seemed that most Sonata owners were using a trunk mount rack, so I placed my order on a Sunday evening. etrailer shipped it the next day and I received the rack on Thursday. It took about 10 minutes to unpack, read the instructions and install it. I put both my mtb and road bike on and went for a test ride. The rack was more stable than the hitch mounted rack I had on my old vehicle, and the best part was it didn't scratch my paint. It keeps the bike pedals far away from my bumper, and it was one of only a few racks that would clear my factory spoiler. It folds up and I can stick it in my trunk while I ride. The only reason for the 4 stars is that the rack is fairly heavy. It would be nice if Yakima could find a way to lighten it up while keeping the rigidity and price where it is now. Otherwise, I'm completely satisfied with the rack and the service from etrailer.

The quality of the bike rack was excellent, but I was unable to use it because I couldn't open and close my trunk (Honda Accord 2012) when the bike rack was closed. It may have worked if I had a different trailer hitch, but I didn't want to spend the extra money on a new trailer hitch. Unfortunately, I will need to return the bike rack.

I was looking for a light weight bike rack for my 2015 Honda Accord. Your videos stated that the Kuat Beta was light and easy to install. You were right. I opened the box, read the instructions, and had it installed in about 10 minutes. I don't use a rack lock. It is so easy to pop on and off the hitch that I keep the rack in my car trunk.

Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.

GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack

Super fast ship! Items exactly as described. Just had hitch installed. On the bike rack easy to put together and load the bikes. I really like the strapping choices.

This is a replacement as old one was damaged during a deer collision.

great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!

The Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.

I like it a lot! I think it has solved my issue with having in easy, yet stable way to haul my bike on my 2012 Honda accord coupe. It's only been one day, so I can't speak about the durability. But it's definitely use a friendly and sturdy.

I looked at a LOT of bike racks, but when I saw the product video for this Hollywood rack and it was holding the bikes rock solid, no loose bouncing anywhere, I decided to try it and I haven't been disappointed yet. It is solid in the mount, it holds the bikes securely and the locking bars are a good deterrent to anyone wanting a quick steal. I don't leave mine on the car all the time, but so far in the weather here in Florida, it's holding up nicely. Add all this to the great price and customer service from etrailer.com and it's a big win for the average consumer. Thanks, etrailer!

I am very pleased with this hitch! Fit my bikes very nicely. Easy to assemble. Rack looks great on my Mazda cx-30. Customer service is very responsive.

A very good, inexpensive, lightweight bike rack. Folds nicely and doesn't interfere with the hatch opening on our 2023 XC40. I wouldn't consider this a heavy duty rack, more suitable for short trips to the riding trails. Good for urban living, as opposed to 4 wheeling out to a mountain destination. Several plastic components. Two things I dislike is 1) the hitch pin lock is cheesy plastic, and because of the threading bolt on the rack's hitch, you can't use a sturdier 5/8" locking pin. and 2) the cotter pins should have a small security cable.

I'm so very happy with this rack!! It was fairly easy to assemble love the sturdy feel. Maiden voyage today the two Ebike's loaded easily and were secured. I think I made the right choice. Thank you

Love the fit and solid quality build of this bike carrier. Can't wait to try it out. I am using this carrier for two e-bikes and I am confident that it will hold up very nicely and will have no problem holding the weight of the 2 bikes.

Pretty straight-forward on how to affix to trunk, any questions are covered nicely throughout the instruction booklets. Once fastened, everything is confidently snug. The only thing I was initially concerned about was the potentiality that the clamps might not fit around my frame (being a thicker-framed MTB). I actually found a YouTube video of somebody reviewing the item and they actually showed some good ideas for how to fit the bike securely to the rack. Once you get that dialed-in, it's as sound as a pound. Haven't had any issues with the rack and don't even worry about it or the bike while driving. Worth the purchase.

Originally I was looking to put a hitch on my 2021 jeep renegade sport for a hitch mount bike rack, after seeing that I would either have to remove seam sealer and drill holes in my rear subframe (this is not a good option living in the rust belt), or remove my entire back bumper off and cut holes in it for the factory style hitch, and still have a rack that is illegal and blocks my license plate/brake lights turn signals I decided to look at different options. A roof rack is a little too high to lift a bike on comfortably. This thule outway platform 2 takes about 10 minutes to install correctly, and is solid and holds the bike securely, and the rack locks to the vehicle, and also the bikes lock to the rack no extra purchases required (comes with 2 keys and plastic spoiler supports). I have driven 80mph over potholes and bumps, also on extreme hills and has held securely.

My one stop shop for everything relating to receivers, hitches, and racks! Great prices + amazing employees = extremely satisfied customers.

Had this for a year now and it is the best rack I've ever owned! Love the tool-free ability to install it on the truck without needing wrenches. Tool-free and anti-rattle, love it!

After doing extensive research before buying my first ever bike rack, I chose the Kuat Sherpa 2.0 platform rack. I considered trunk mounted, hanging and platform racks before settling on a platform rack. I like the stability, the ease of loading and unloading and very importantly, the absence of contact with the frame of my bike. My bike has a beautiful paint job that I want to preserve. I looked at lots of racks online and at a bike shop and opted for the Kuat Sherpa 2.0 because of the excellent engineering, including the design of the packaging that becomes a work bench for assembling the rack, the relatively light weight (32 pounds), the inclusion of a hitch lock and a bike lock, the stability of the platform, even with a 1.25" connection and a class I hitch, and the ease of operation. Additionally, the overall appearance of the rack suggests high quality. Time will tell how well it ages but I'm pretty confident that I'll be pleased with it. I was very fortunate to find a used, like new Kuat via Etrailer at a meaningful discount that still qualified for the manufacturer's warranty! Thank you Etrailer! A tip to pass along that was shared with me, U-Haul is an excellent source for buying and installing hitches to accommodate bike racks - very attractive pricing, high quality installation and a super unlimited lifetime warranty. Can't wait for Spring and the chance to transport my bike to inviting riding venues!! PS The hitch and bike rack work very well with my 2011 Honda Accord Coupe, EXL V6 model that remains in excellent condition.

I’ve had the Kuat Sherpa for about a year now and could not be more happy with this bike rack. When not in use I keep it safely in the garage- it only takes a few minutes to install it to my Honda Civic and safely secure two bikes using its exquisitely engineered and designed system. I’ve used this for 900+ mile trips with no issues whatsoever - the perfect bike rack!

So far really great! I love the stability my bike has on the rack, fit for my 2021 Honda Civic, and the quality of the material engineered into the design to prevent damage to the cars paint/parts.

Very easy to put on and take off of car. Holds bike secure (I have yet to put 2 bikes on it but I'm sure it would be fine). I replaced my hitch mount bike rack with this. So glad. Now I don't have to have a bike rack on the car all the time and can access my hatch back easily when I am not carrying a bike.

My husband and I are in our 60's and had no problem putting this together as per instructions. It's a good solid rack, no wobble even with my big 35 pound 29'er. It easily clears our steep curb on the back of our Subaru Outback. The hatch clears the bike and there's plenty of room to move between the car and bike in that tilt position. We loaded our car for vacation with the bike on the rack. It's a bonus to be able to leave it all on the car in our garage. We also bought the Drawtite 2" hitch from etrailer.com. We're very happy with this setup!

I've had no issues with this bike rack. My bike weighs approximately. 35 lbs and I've taken it several 300 - 400 mile journeys using this bike rack. This bike rack is very easy to assemble, install / remove from the car, and secure the bike for travel.

Great product! Well built. High quality. The tilting feature allows me to open my Jeep hatch without removal.

I think this is a simple and efficient rack, but it is not for everyone. Because it is a frame clamp design, you should not mount Carbon Fiber frames or thin walled aluminum frames for risk of frame damage. Thich aluminum and steel frames should not have a problem. My heavy fat bike fits just fine if it's the only bike on the rack. 2 regular mountain bikes will fit in opposite directions. This rack will never realistically hold 3 mountain bikes. (maybe 3 road bikes) I removed one of the clamps, easy to do, makes a cleaner setup. Bikes with small triangles (smaller frames and certain full suspension) will be difficult to mount due to the locking/clamping mechanism size trying to fit through the frame and made worse with bottle holders. I changed out the bolts at the hitch side to make it a rigid rack. There is no need for me to pivot this rack and now has one less thing to go wrong. The threaded locking bolt makes this hitch rock solid with no clunking noises while transporting. The BIG advantage of this rack is storage. It fits behind my seat and is invisible to the passing eye and can be installed or removed in a few seconds.

I've had a couple of hitch mount bike carriers in the past but they were hanging carriers. I am no fan of those especially with the geometry that doesn't allow for the bike to sit straight. The Kuat Transfer rack was a huge upgrade for me. Loading and unloading bikes is easy. Bikes are very secure on the rack as well. I like the pedal for lifting and lowering but you will need to use your hand instead of your foot depending on the position. I was recently sent a recall notice for the rack where the pedal/lever can cause the rack to release. There's a kit that you can put on or you can have it put on by a professional. They will send you the kit and strap (that you can use temporarily until you get the kit installed). I have the kit but not have installed it yet but from what I can tell, it has another small lever that you'll need to push out of the way as you press on the larger lever. I don't expect the function of the rack to be any different. I use the bike rack every week. I have never had an issue with it and am very satisfied. It does what it's supposed to while tucking away while not in use. I would buy it again.

Works great, no issues.

I like the bike rack; but the rack seems to be made more for bikes with cross bars; my wife's bike does not have one and its a challenge loading her bike securely to the straps on the rack. I also wish there was a quick disconnect of the rack from the hitch. The rack comes with a threaded bolt, nut and cotter pin. I also purchased the security lock that locks onto the threaded bolt. However I don't keep my rack on the car all the time. When I reach my destination by car I take the rack off and lock it into my trunk. Threading and unthreading the bolt is time consuming; A quick discount to and from the hitch would be ideal for those times I lock the rack in my trunk; which is most of the time.

Once I watched the Setup Video provided by etrailer.com I was confident in my purchase. Upon receiving my bike rack I spent a few minutes reading the manual and then went out to my garage to install it. It took minutes. After reading the manual I realized that I would require "straps" to keep the front tire in place during transportation. Overall I am happy with my purchase and quick delivery.