Best 2018 Honda Odyssey Trailer Hitch Ball Mounts

Well built. Make sure you buy the pin separately, as it does not come with the receiver - which I thought would make sense.

Perfect rise for 03 Odyssey Perfect rise for my 03 Odyssey to match up with my boat trailer. Called etrailer and they helped me select this one, and it fits wonderfully. This is a great group of people who want to sell you the right product the first time!

The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.

Perfect fit, no hassle to install, works just like one off the factory line. :)~ This online company has some of the best customer service I have ever dealt with, and we all know customer service is tough to find in this day and age. Low prices and great products. I highly recommend etrailer.com!

The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.

Love the hitch, ball mount, ball and wiring harness. All were a breeze to install.

Excellent 2" ball mount. I have one of these for every vehicle that I use for towing.

Feels great in hand, but I won't be using it. For my 2006 Odyssey I need a 4" lift so my brother has already claimed it. Made in the USA.

I have never regretted ordering through etrailer. As always, this order arrived precisely on-time. The wiring for trailer lights proceeded exactly as expected. The online video describing the installation was very helpful with no surprises encountered while following the instruction. Don't forget to order a hitch pin. Surprisingly, it wasn't included with the drawbar.

The bar was exactly as I expected, but there were two deep dings that penetrated the paint and actually deformed the underlying metal. Disappointing as this is, knowing that it will probably develop rust prematurely while in use, I decided to not go through the hassle of requesting a replacement unit.

Very please with the purchase. Solid construction and raised the overall height of the receiver hitch on my Honda Odyssey with added ground clearance. Excellent service/shipping from eTrailer as usual.

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.

Very well made, great value!

This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.

The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.

This is exactly what I needed for my front end mounted receiver.

As advertised and quick delivery, I am an Etrailer fan!

Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position.

Everything was perfect.! Nice paint, package, and fast shipping.! Im satisfied.!

I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you

Works great for my lifted truck. The cushion part of it works great, not so much loosness in that area felt any longer.

Good fit, well made, worked well on first use, ball attached easily, was the reciever I was looking for.

Holds my ball at the perfect height

I purchased this Curt Ball mount 10-1/4" because I also bought ball hitch mounted mud flaps and my existing hitch was too short.This hitch was maybe a little too long, but it should work.I hope this combination will protect my horse trailer from my nasty gravel roads!

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

I hooked up the draw bar today for the first time to the trailer that I built and the hitch I installed. The draw bar uses a cotter pin that slides on the bolt rather than going through a hole to mount the bar to the hitch. I have never used a sliding on pin in anything - I've only used those that go through a small hole matching the pin. This includes my farm tractor and other tools. I hope it is secure because it does slide on easily. The bar itself appears nice and strong.

We used our car hitch and cargo carrier last summer in a Honda Accord to support a cargo carrier. It held up great on a 4,000 mile camping/hiking trip from Mid Missouri to Glacier National Park, MT. We were able to use the carrier/hitch to carry our large tents and baggage (approx 120#)directly behind our car trunk. Initially I was a little hesitant at the smaller 1-1/4" tube hitch, but it was very stable throughout the long trip. Sure was a lot less drag than putting all our gear on a roof cargo carrier.

Arrived today. Fast shipping, and thank you for that! Seems to be a quality ball mount. Just what I needed to get the ball lower to tow my trailer. With this, now the top of the ball is at 16" where it needs to be. Custom built receiver on my old moving box van. Just need to weld on safety chain slots and paint it. Can't drop the lift gate with the receiver in (its pinned on both sides), but hey....I can tow now.

Tow infrequently; got new(to us) 2015 RAM 2500 pick up to tow our 38’ touring travel trailer. Have a HD WD hitch & adjustable sway control hitch set up we use for this trailer, but needed a drop hitch for our smaller Travel trailer& misc use haul trailer,,,,both much lighter & do not require the sway control set up. This drop hitch & ball fit the bill perfectly as the needed drop did not provide suffice t ground clearances to utilize the WD hitch mount setup (which was not needed) for those smaller loads. E-trailer worked w us to get the product we needed & an option that was inexpenve but sufficiently rated to pull our smaller trailers! Very happy our results !

Seems to be high quality.

Fits snug with the built-in tapers. Seems sturdy. Hopefully will last a long time.

Your company has been terrific!! Everything went well did have a small issue that required a return but well very smooth. Thank you for your support and high quality personnel and products!!

I ordered this extra length ball mount to keep the back end of my Honda Odyssey out of the water when I launched my boat. It does exactly what I wanted. It connects with the hitch I purchased from etrailer last year. Going to etrailer was my first step when I realized I needed additional length. I wish that more Internet companies had the service I get from etrailer. John Boddie

Great!

Joann came through on this order. Five stars for her.

Fast and just want I needed and good quality

Very convenient kit. Nice to have the locking pin and receiver cover. I reversed to the 2" rise position since my 2016 Honda Odyssey already sits low to the ground.

Great purchase experience. eTrailer has this convenient package of ball and hitch already torqued together, AND includes a locking pin in addition to the normal cotter pin! Website is clear on details of package, contents, and dimensions of each component. Shipping was fast and packaged well. I’m not sure if I saved money compared to buying all this separately, but I’m going to believe I did. Thanks!