# 1
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Sturdy construction and fits great!
etrailer.com has been my go to place for trailer parts for a very long time. Great customer service, fast shipping, and the best quality parts available. They always have exactly what I need at a super price!
# 2
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
I ordered and received a class 2 trailer hitch, drawbar, and cap for my Town and Country. Everything was received timely. The box that contained the hitch was damaged as it was not secured well in the box and is so heavy that it slid around and punched a large hole in the side. Even the UPS driver was concerned and asked me to check that no contents fell out. Fortunately none had. Regardless, great products for a great price...trust me, I'm cheap and shop around.
The hitch was just what I wanted. Upside down, it clears bumper and puts the trailer height at level position. Shipping was fast. Thanks.
# 3
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Part quality and fit was great. Missing pin and clip due to box being partially destroyed.
Great product. Fast shipping. Exactly what I needed. I really like all the video support.
# 4
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
I ordered and received a class 2 trailer hitch, drawbar, and cap for my Town and Country. Everything was received timely. The box that contained the hitch was damaged as it was not secured well in the box and is so heavy that it slid around and punched a large hole in the side. Even the UPS driver was concerned and asked me to check that no contents fell out. Fortunately none had. Regardless, great products for a great price...trust me, I'm cheap and shop around.
Web site was helpful, and product was delivered as promised
# 5
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
# 6
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Sturdy construction and fits great!
etrailer.com has been my go to place for trailer parts for a very long time. Great customer service, fast shipping, and the best quality parts available. They always have exactly what I need at a super price!
# 7
Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs
This ball mount gives me the adjustment I needed on my Dodge Grand Caravan when I rent different trailers. The part that goes into the hitch does have a little play but it is no worse than my current fixed height ball mount. The adjustable ball mount with the 2 pins also has about a 1/8" play so be ready for that if you buy this adjustable ball mount. That would be the only improvement I think they could make in the future is to have the pins a little larger and/or the holes a little smaller to reduce the play. However, this might just be the way these need to be designed at this price point based on the research I have done with other adjustable hitches.
Unit worked, but the fit between the 2.5" adapter and the hitch was loose. It caused the trailer to rock back and forth with every application of the brakes. Had to make shims to stop unit from clanking. Felt like if length of attaching piece was longer it would had helped. Attached picture to help illustrate.
# 8
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 2,000 lbs
I ordered and received a class 2 trailer hitch, drawbar, and cap for my Town and Country. Everything was received timely. The box that contained the hitch was damaged as it was not secured well in the box and is so heavy that it slid around and punched a large hole in the side. Even the UPS driver was concerned and asked me to check that no contents fell out. Fortunately none had. Regardless, great products for a great price...trust me, I'm cheap and shop around.
The hitch was just what I wanted. Upside down, it clears bumper and puts the trailer height at level position. Shipping was fast. Thanks.
# 9
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
It's a tongue and two ball sizes. Not much to go wrong here. Took about ordered on a Sunday, got it on Wednesday.
heavy, solid construction. Feel it will be very durable for a long time
# 10
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Delivery was fast. Arrived in well packed box. Installed product with no issues at all. Works great and as advertised. Will be towing a travel trailer and needed a connection for a bike rack. When all installed, have plenty of room for placing bikes on bike rack. Really like this product!
Adapter delivered fast and installed in seconds. Fits like a glove..
# 11
Draw-Tite Ball Mount - 6-3/4" Rise, 8" Drop - 10" Long - 5,000 lbs
Perfect Fit! Just the right length for the (75579) Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III.
Solid and heavy.
# 12
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
Part quality and fit was great. Missing pin and clip due to box being partially destroyed.
Great product. Fast shipping. Exactly what I needed. I really like all the video support.
# 13
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Item received in perfect condition. Thank you.
fast shipping
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 15
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Sturdy construction and fits great!
etrailer.com has been my go to place for trailer parts for a very long time. Great customer service, fast shipping, and the best quality parts available. They always have exactly what I need at a super price!
# 16
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack. But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !
# 17
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
A nice solid constructed hitch. It should handle everything I hook up to
# 18
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Part quality and fit was great. Missing pin and clip due to box being partially destroyed.
Great product. Fast shipping. Exactly what I needed. I really like all the video support.
# 19
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
I ordered and received a class 2 trailer hitch, drawbar, and cap for my Town and Country. Everything was received timely. The box that contained the hitch was damaged as it was not secured well in the box and is so heavy that it slid around and punched a large hole in the side. Even the UPS driver was concerned and asked me to check that no contents fell out. Fortunately none had. Regardless, great products for a great price...trust me, I'm cheap and shop around.
exactly as ordered came 1 day earlier than promised
# 20
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."