Best 2014 Honda Ridgeline Trailer Hitch Ball Mounts

Works great with my truck and trailer - quick to put on and take off

Decent quality. Made in China.

Disappointment came with the ball mount I bought, it comes with a pin & clip, but that isn't stated, so I bought a pin & clip that I don't need! The quality of the product is excellent though.

Ball mount with 2" drop and pin with lock worked perfectly on 2011 Honda Ridgeline RTS.

Easy to install. Did the job it was purchased for. I needed it on my 2017 Honda Ridgeline to pull a kayak trailer.

Just what's needed

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

Once the bike rack and the ball are installed there is only 3" of space for the trailer coupler to attach to the ball. Mine open hitch height is 4 ½”, most others are similar. I cannot think of any trailer/rack combination that this could even be used for. The only way it could be used would be to hitch up the trailer then attach the rack then load the rack over the trailer. Not a good or safe proposition. The only way to detach the trailer would be to unload the rack and then remove it from the mount.

This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.

I actually got my hitch the date they said it would be here to my surprise. When the box arrived it was pretty much beat up, not the hitch just the box. I wished there was instructions how to install it. Overall very satisfied and will buy from 5hem again

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

We have a Pink Tractor (google Mom's Pink Tractor) that we pull to events, mainly in Ks, Ok, Mo, and Ne. We have around 35 events a year we take the tractor to to promote breast cancer awareness. The other day my wife and I were leaving for an event, i had let a friend borrow the hitch to see how he liked it. In less then a mile from the house my wife started complaining about the trailer jerking. That is coming from a lady that really was upset when I paid that much for a hitch. She told me to stop and buy one. (a long and expensive trip, we had to stop at a casino so she could rest her neck) I could write a review with a lot of trailer talk, but, this story tells the story.

I like the look of this set very much and it is easy to mount and adjust the ball mount. The workmanship and finish are beautiful. Customer service was excellent in assuring I found the correct mount for my Ford Escape. I pull my 6'x10' utility trailer or very seldom my pontoon trailer. I like that the adjustable mount comes off very easily as I remove it until I need it while my vehicle is in the garage--it helps prevent knocking your leg against it in the garage. However, I am not having any luck loosening the bolt that secures the 2 chrome balls to the adjustable ball mount; I have the correct Allen wrench but cannot exert sufficient torque to loosen the bolt while the adjustable ball holder is off the ball mount. I want to put a different ball combination on so I can pull my son's trailer, which has a smaller ball than comes with the set, if I have to. I also added the anti-rattle device and it stops the mount completely.

This hitch has worked great for the Curt friction sway control for my pop-up camper. I tow with a Honda Ridgeline and this fits perfect and works as it should. I would recommend this to others.

To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

Hitch is too long! Need to have more that 1 hitch pin hole.

The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.

Mistakenly ordered the 2.5 inch receiver instead of the 2 inch. Ashley replaced the receiver within 2 days! Outstanding service! I will continue to use etrailer.com!

Great American made product! Their 2.5 to 2in sleeve is made in China though!

Retail type stores only carry mainstream items so when I needed a special length ball mount for my 2011 Traverse I found the size and quality with Curt Products .

Recently bought a Kubota RTV x900. The receiver is located under the bed. With the extra long ball hitch drawbar I can easily get to the drawbar and use a clevis to hitch my 5ft. wide mower or attach a ball and use the trailer. The pictures will illustrate the length of the drawbar which makes access very easy. The product is heavy duty and well made. Ordered this product on Thursday morning and it was delivered the next day, Friday afternoon. Customer service was helpful, will use etrailer again. Thanks

Excellent quality, built to last a lifetime - the B & W brand quality was exactly what I was looking for. After shopping and considering several other brands, very glad this is the one I purchased. Highly recommend it.

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

Great solid forged Ball mount!

GREAT PRODUCT FOR THE RIGHT PRICE. SHIPPING WAS QUICK AND WBSITE VERY USER FRIENDLY

Works great for our various race boats with all different trailers

I have been using the Rapid Adjustable Aluminum Ball Mount hitch for over a year averaging 3 days a week delivering new compact diesel tractors to customers. The hitch has held up very well with no signs of wear. The Teflon black caps on the ball are awesome when hitching up, there is no problem with the receiver sliding onto the ball when miss aligned. I have recommended this hitch to many of my friends and customers, they too are pleased with the hitch.

This was the right set up for my 2018 4Runner. Works great. As a footnote, I now have a second vehicle for towing (2019 Tundra 4X4). Using the measuring process provided by etrailer folks, I found the same ball works great on the Tundra. Thanks!

All of the products I've have bought for my trailer project from etrailer have been great. My go-to place for anything trailer related!

Arrived today, one day ahead of schedule. Haven’t tested it yet, except for fitting it into the 2” receiver mounted on the SUV. No problem with mounting or pin. It should work as expected. If I note a problem, I’ll update my review.

A very nice unit. It is all welded and looks to be very sturdy. It includes the pin and clip

Super hitch. Best money spent for towing so far. Prompt shipping and a pleasure to buy from this vendor! Thrilled with my experience and will look here for all my trailer and towing needs.

I needed an extra long shank to fit on my goldwing with 2010 champion trike kit Could not find anything local so found this on on your site and bought it got it in and it was a perfect fit only wish I had bought that ball and pain for it also

2013 Goldwing Motortrike receiver hitch to Bushtec trailer. etrailer was the only company that I could find that had the hitch in the right dimensions that I needed: Length of at least 12 ", and rise of at least 3.5 ". My order was processed and shipped faster than anything I have ever ordered over the Internet. I am extremely pleased with the price and service. I recommend etrailer to anyone needing hitch equipment.

New GMC AT4 required a new ball mount and this one fit all the requirements for the truck and new multi-pro tailgate. With the AT4, I needed more drop and a longer shank (12" hole) for the tailgate to not hit my trailer jack stand; plus, the multiple drop adjustments will make changing trailers a snap. Great product from Curt and great service from etrailer (as usual).

Curt makes great products. I've bought their stuff before and never had any problems.