# 1
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
Have not installed yet but looks as described.
# 2
LED Trailer Tail Light with License Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side
This was almost perfect. It fit well and was almost exactly like the original. The "almost" was the fact that the wires exited the rear of the light just a little bit offset of the existing hole on the RV. I especially like the way the website is set up. It was sooo easy to locate this exact replacement light.
Used this set of lights to replace regular incandescent lights on our 36 foot Montana 5th wheel. The dimensions are very close and did not leave any evidence of a misfit. They are very bright and well made . I would buy again.
# 3
Optronics Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - White Base - Red Lens
This is a good quality light, water tight and worked well. It has been on the trailer for over a year now and still has no issues. The lens can interchange on other similar bases, but if the base is old and damaged like mine was, this is a great replacement.
Easy replacement for my Thor Hurricane back lights.
# 4
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side
First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.
My replacement lights came quickly and were quite easy to install.
# 5
Low Profile LED RV Tail Light - Brake, Tail, Turn - Passenger - Rectangular - Surface Mount - Red
My replacement lights came quickly and were quite easy to install.
The taillight worked great. E-Trailer is the best company to deal with.
# 6
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
These are great. They fit into a 2x4 piece of steel C channel very nicely. This makes for a very strong and easy to mount combo that actually holds up when pulling the trailer off road. The stock tail light housing was very thin and would rip off going over uneven terrain, not to mention the oval lights would vibrate out. These lights bolt on and won’t fall out.
Very satisfied with the combination trailer tail lights. Much brighter than the original lights. Fit was perfect, no alterations were needed.
# 7
Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Amber Lens
I purchased $XX worth of led lights 6 marker lights and 2 ovals. The marker light had a protective wrapper and showed up pristine condition, however both ovals were thrown in the box with no protective wrapper the clear oval has a scratch but is still in good condition the red oval has scratches all over it to the point it looks used. Pretty Sad. Wish I could off included photos but it was hard to see the scratches In the picture my camera isn't the greatest.
These are exactly what I was looking for
# 8
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.
Well being a construction trailer one has been smashed at least 3 times but still functions with a little tape. I will be replacing them soon with similar parts from etrailer
# 9
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - White Base - Amber Lens
I should have looked at the photos more closely, as the wiring comes directly out of the rear of the light. The wiring on the OEM light I replaced was a bit more flexible for mounting the light on the fronts of the two fenders on my tow dolly. Also, the mounting holes for the hardware were a larger diameter than I expected, so I had to use washers to keep the smallish bolts from pulling through. On the other hand, the LED lights are brighter than the incandescent bulbs in the OEM lights and they will NOT come loose from road vibration as did the cheesy bulbs and bulb mounts in the OEM lights. Overall, a definite step up for use. The only complaint was the extra time deciding how to accomplish the wiring and mounting.
I wired the lights into my camper trailer; no problem connecting and lights are bright and a year later, still reliable. One thing that might be specific to my set up was that lens was somewhat loose, so to avoid losing somewhere on the highway, I secured with silicon adhesive. Other than that - a good product; does what it is supposed to do.
# 10
LED Trailer Light w/ Reflector - Brake, Turn, Tail - Passenger Side - Oval - Red
OEM product for a great price
Exact fit replacement. Still working as expected.
# 11
LED Clearance Light Assembly for Trailer Fender - Trailers over 80" Wide - Driver Side
Nice lights, a bit over priced but work well. I have them mounted on my trailer so I can see the end of the trailer in both mirrors when traveling straight.
The compact size made it easy to locate on the fender. I added a grommet for extra protection going through a metal fender.
# 12
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens
Was the same size as original equipment.
# 13
Optronics LED Trailer Clearance and Side Marker Light w/ Reflex Reflector - 6 Diodes - Amber Lens
We have upgraded all our trailers to LED. This is the first light we have replaced in 7 years. We use etrailer for all our trailer lighting.
The cover almost fit perfectly. Well built. Held up well to a harsh winter. A surprising find was that it keeps our fifth wheel dust free on the inside as well as the outside. well worth the expense.
# 14
LED Trailer Tail Light w/ Reflector and Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side
I ordered this product as an exact replacement for the one I had to replace. Placing he order and checkout was extremely easy. Via there website I was able to track the entire process from ordering, handling and the shipping process. Etrailer is company I have in the past and will continue using.
Our tail light quit working during our vacation - we checked with a local RV shop and they told us the part was on back order and they wouldn’t have it for 4 weeks. We found it on trailer and ordered it and had the light in 4 days delivered to the campground we were staying at- Thank you etrailer!!!
# 15
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
Perfect fit for replacement. Quick shipping.
perfect fit on a 2015 Aliner , etrailer is the best!
# 16
ONE LED RV Combination Tail Light w/ License Plate Bracket - 4 Function - 1 Diode - Driver Side
Terrific upgrade in my opinion. The installation was pretty easy for me. The light is slightly smaller than the original and I have the corrugated sheet metal siding I did not experience any led hyper flash with this light. I was slightly concerned about this after seeing videos of people changing to led light bulbs on the tow vehicle. This light was plug and play. 4 stars because the manufacturer did not provide a wiring diagram :( I don’t feel you should guess what wire goes where. The least they could do is tell you what they (the manufacturer) wired for ground. In my case, the white was ground, same as my trailer wiring. However I needed to connect green to black to get my turn signal to work. Your situation may be different. Would I buy it again? At this time, yes. I’m hoping this light outlasts my usage of this travel trailer- which should be for many years.
I ordered both the RVSTLB0060 and the RVSTLB0061. My only disappointment with the RVSTLB0061 was the LED module was not attached to the frame like the RVSTLB0060. Luckily, I had two small sheet metal screws I could use to secure the LED to the frame mount. My installation was on a 2016 Rockwood A212HW. The OEM lights were the Optronics incandescent version. RVSTLB0060/61 are direct replacements except for the odd (offset) drill pattern used during factory assembly (they did not use all the Optronic predrilled holes). OEM mounting screws were reused but I added a bead of glue to the threads to help secure over time. Note the factory uses a good bit of RTV silicon on the top portion of the light frame to help hold in place and fit the slight curve of the body.
# 17
Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber
Very bright light, same connectors as my 2001 Shoreland'r boat trailer, just had to plug them in. Cannot say enough about the staff at etrailer, very helpful.
SPLENDID! Popped the old incandescent Side Marker Lights out on my 2008 Triton 21X2 trailer and installed these Thinline LED Clearance and Side Marker Lights (both the AMBER and RED ones). Just Plug-N-Play and my boat trailer looks AWESOME! Shipping was a snap!
# 18
Incandescent RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangle - Surface Mount - Red
All I really needed was the lens but I ordered the whole light to have spare parts. Fits perfect.
This product was received in perfect condition and was exactly what we ordered. This is the exact product on our trailer now and we were pleased to find a replacement at such a reasonable price. Unfortunately, when we attempted to remove the lens from the base, one of the clips broke. I just ordered another one. Fingers crossed it doesn't break this time.
# 19
Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long
Great service! My order was shipped the same day as my order. The lights are high quality for a good price. Will definitely be using etrailer for my rv needs.
Good product and lights up well. The glue could be a bit stronger than it is. Had a couple parts of the strips come loose when the weather got warm.
# 20
LED Trailer Tail Light with License Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side
Just got my lights they look great but l will have to wait till it warms up from -15 to install them
Tail light delivered on time and easy to install . LED’s much brighter and visible than the original incandescent bulb. Nice lights!
What our customers are saying:
"I was very pleased with the promptness of the delivery of my order, and the products were exactly what I needed. I highly recommend your company to anyone needing anything to do with trailers. Thank you"