Best 2001 Dodge Van Bike Racks

Hi This is an Excellent Bike Rack, It came in no time, Nicely Plastic Wrapped incase of Rain, The Instructions were an Easy Read. I Installed it on my 2001 Honda CRV which was a Breeze, I do think that People Who are too week to lift a Tire shouldnt attempt this alone Though. When You install it you have one hand to hold the tire and one to Screw in your bolts. It does require Strength and Dexterity, and we who ride Bikes already Have that I would Think. I put My Trek Bike on the Rack it Fits Great ! , and Im Ready to tour the Countryside. Thanks etrailer.com You Guys Know your Stuff Alan J

Very easy to install, looks great on my jeep. Very strong materials used to make. Looks to last me several years of riding trips. Bonus is that I can also mount it on my pop up tent trailer when I go camping. Very satisfying. Price was decent too. Thank you for prompt delivery. Sincerely, Mr. Mendez

This is a really good rack. We do a lot of car camping out of our Subaru Outback and I wanted a bike rack that would swing aside so we can raise the hatchback and easily access the camping gear, cooler, duffel bags, etc that we carry in back (see photo). This rack 100% solves that problem. Further, the bike hold-downs are very secure. I use them on their own for shorter trips. For a longer trip or one that may involve a rough road, I supplement them with a ratchet strap, but this is probably just unnecessary paranoia--the hold-downs are excellent. My one heads-up about this rack is that it is heavy. I am a large, strong man and can attach it myself, but I do not look forward to the chore. This is a beefy rack and the weight is unavoidable. I welcome how sturdily-built the rack is. We typically carry my normal bike and my wife's heavy e-bike on it, and the rack is totally up to the job. Highly recommended. I have zero regrets about the purchase and the investment in this rack that will serve us for many years to come. The design is pretty much perfect--I can't think of one thing I would change.

We love our RockyMounts BackStage Bike Rack. The fact that it can hold our two e-bikes and swings out for rear door access makes it perfect for vanlife. Service and communication from etrailer is outstanading!

Excellent bike rack. Easy to put together. Fits perfect with the etrailer curt hitch. This is a heavy duty bike rack, which also means it heavy but still manageable. Using this for my Aventon Ebike.

This rack is heavy, easy to assemble and has zero wobble. The reason I purchased this rack was due to the quality of the rack, but also my last experience with trailer. Great customer service, and if you have a question, it's pretty easy to get hold of a real person! I actually purchased this for an Ebike.

This HRSR1 bike carrier will not fit a 2023 Jeep Wrangler JL UNLESS you remove the stock Liddy Light and associated bracket. Upon discovering this, I was able to locate an aftermarket kit which allows for the relocation of the light to just above the rear camera. The kit was easily installed and the bike mount was installed just as easily as the directions explain. The new location of the light is partially obscured with the bikes mounted and, although not ideal, it is adequate and certainly better than total removal. I was unable to find any mention of this situation in the install instructions or reviews prior to purchase of the rack. I just wish I had been aware of this before purchase. I would have rated 5 stars for this product were it not for the slight hiccup. Kudos to etrailer. It is always a pleasure to do business with them. They are very helpful, friendly and knowledgeable.

It's sturdy even off-road, and it's simple to take on and off. I've had to use my spare tire twice since owning this rack, and although I have to remove my bike and loosen the bike rack bolts a bit, it comes off and goes back on with minimal effort, which is nice when you're on the Alaska Highway and it's snowing. I've carried my full-suspension bike on this rack for 35k miles all over the U.S. and Canada. I like how my bike fits close to the tire, where I lock it. My tailgate opens without the bike touching the side of my Jeep. Great bang for the buck.

I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?

Very stable and simple to use bike rack that works great with my road bike AND with my 29" Big Rippers. It makes loading and unloading the bikes a snap and they are safe and secure for traveling once loaded and secured. I have already logged over a thousand miles hauling bicycles with this rack and highly recommend it. I am a big fan of Yakima roof racks but, honestly, wish I would have went with this setup for my bikes from the beginning.

Almost the perfect bike rack for the Promaster. No complaints after a year of use. Thousands of miles with road bikes, gravel bikes, and modern mountain bikes on there and no problems that weren't my own. And if you are creative, you can use the rack for other things, like carry a storage box or traction tracks. Well worth the money if you want to keep your hitch free for other things.

Absolutely love this rack. We have 2 of the smaller REI e-bikes but they come close to the max recommended weight. I take off the batteries to keep it under. After 1 year we have had no issues. I appreciate the clamp style lock because I also added a cable lock for extra protection and one time while we were hiking someone cut the cable, but the bikes were still securely locked by the rack, so they must have gave up at that point. The only advice I would give (especially when heavier like ours) is that when closing the door, I keep my left hand on the bike to stabilize it so it doesn't "bounce" when the door shuts. I just don't want any unnecessary pressure on the system. Great product overall allows our van to not be any longer than needed.

Super easy to load 4 bikes and go. Takes me 5 minutes to get all 4 on the rack, compared to 15-20 with the rack I had before. I would change nothing honestly. It's a fantastic rack. It has performed great. I can now quickly load 2 kids bikes and 2 adult bikes on the rack with no special adapters. We can hit trails faster and spend more time riding. There is no real downside. It's also significantly cheaper than competitors and provides a much easier and smooth experience. Is it a great rack for small families who want to ride together. No adapters needed for different sized bikes and super easy to load and unload. I would not recommend this particular model if you don't plan on using more than 2 slots. But for 3 or 4 it rules.

One year in and it is great. I have a 2021 Subaru accent and it is perfect. We carry 4 adult bikes and while it is a tight fit it works great. The rack is VERY solid and does not move when tightened up. Over the past year we have used it 3-4 times with no issues so far. It is easy to use and one person can easily load and unload the bikes. The tilt up feature is nice and when the rack is down and there are no bikes we can open the back hatch without an issue and there is plenty of clearance. We have been very happy with the performance and the price.

I've been looking a eBike racks for about a month and finally decided on this Swagman rack because it's rated for use on an RV. That's what I needed because it will be on the back of my travel trailer. I had it on my wish list on another site but etrailer had it for $[XX] less, so I jumped on it. It was fairly easy to put together, I installed it on the hitch on my truck so I wouldn't have to wrestle with it on the floor of my garage, that made it easy to assemble. This rack is very well built, and is very solid, it doesn't move while on the hitch on my truck (I installed the RV hardware) so I have no doubt that in will be fine on the back of mhy travel trailer.

So far so good! I have used it on the back of my Jeep Grand Cherokee and on the back of our travel trailer. It is a pretty solid e-bike rack. I would definitely recommend this e-bike rack. We did purchase it for using on our travel trailer, but also works great on the back of our cars, which have 2" hitch receivers. On the travel trailer we also installed a Draw-Tite Hitch, along with a Curt 14" hitch extender for 2" trailer hitches and a Malone anti-rattle hitch lock system. We purchased everything from etrailer. I am very happy with how all of this works together for hauling our e-bikes on the back of our travel trailer.

One Year Later – Still Going Strong I’ve owned this rack for a year now, and I couldn’t be happier. It securely holds all 4 of my bikes, even on longer road trips, with no shifting or wobble. One of my favorite features is the ability to tilt the rack away from the vehicle—even when it's fully loaded. That’s a huge convenience and makes it super practical for daily use. Durable, easy to use, and thoughtfully designed. Highly recommend if you're looking for a reliable 4-bike solution.

This bike rack has worked well for us. We have a Jeep Wrangler, with the spare tire on the back of the tailgate, and needed a rack that would hold the bikes in a trailer hitch, and swing away so we could easily access the rear storage of the jeep. This has worked out perfectly! I did have to use a hitch extender to clear the rear tire, but that was expected. The rack works well, holds the bikes as expected, and is easy to use, and get on and off the vehicle. I am very satisfied!

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.

I got this rack for my 2011 Toyota RAV4. This rack is great easy to install and use. It holds up on long, bumpy rides. The only complaint that I have is that the bar that goes around the top of the spare tire rubs against my rear windshield wiper arm, but I removed the small piece of plastic molding at the base of the wiper arm and it no longer rubs.

Does not fit 3 bikes easily, my son's bike will not even fit on it. the hubs are not user friendly. I would not recommend

Such a fabulous bike rack!! The rack is simple to mount onto the van’s hitch. It’s easy to add or take off the outer rack either before or after putting it on the hitch. The two part design is a great feature for taking a bike to the shop for repair, for when it’s just the two of us, or we can quickly add the second half for two more bikes. It folds up against the back of the van easily and securely. When needed it holds four adult bikes without any problems. Bikes are SO enjoyable to load onto this rack - way better than racks that support the bike by the frame. I have a Y frame bike so it was always challenging to load it onto a traditional rack. The tire supports move to accommodate any size bike. Bikes that have the lower frame get mounted closer to the vehicle for each section of the rack. The rack is stable when driving, even when fully loaded. The locking feature is nice, especially for when we’re away from home and the bikes stay on the rack overnight. Be careful when lifting as the rack itself is heavy.

I've been using a Yakima RidgeBack 4-Bike for many years however I needed to find a bike rack that would transport my wife's new Trek Verve +2 Lowstep E-Bike. Since it is a Step-through and weighs 52 lbs. with the battery, I was uncomfortable hanging the bike off the RidgeBack. I typically only transport 2 bikes however occasionally need to pack up 3 or 4 bikes. After much research, I decided on the Hollywood Racks Sport Rider SE4. I loved the fact that I could take off the extension and make it a two back rack and appreciated the price. I was however concerned the E-Bike might be too heavy as the specifications note a 50 lb. per bike limit so I reached out directly to Hollywood Bikes. I asked if they thought it'd be alright to place the E-Bike closest to the vehicle with the battery removed. I heard back from them within 24 hours and they agreed, with the battery removed it would be fine. I ordered the SE4 on Monday morning and it arrived Thursday. It was well packaged and easy to assemble using the instructions. I had absolutely no issues and it went together perfectly. The rack is of very good quality and sturdy even when loaded up. I really like that the bikes can be locked down and everything, including the supplied cable is keyed alike. I was able set it up for only 3 bikes as that is all we're taking to Florida next week. I'll follow up after our trip.

We had an unusual situation. This bike carrier seemed to be the best starting point. We are pulling a sailplane trailer with an RV but wanted to bring a large E-bike with us but not fill the RV. We adapted the provided receiver mount to clamp on the trailer tongue. It made the trip from north NJ to central SC fine. You can see how it worked out, it even retained the tilt.

The rack is compact when folded up and the tilt function is very handy when driving an SUV for access to the rear door. It's solid and rugged. And at less than $200 it's a real bargain. I would have given it five stars but for the fact that, if you want to lock it to a 2" hitch receiver you must buy a separate locking threaded hitch pin for $37.50. The provided hitch pin will secure the rack but the tip does not protrude far enough to place the provided safety clip on it. Not a problem if you have a 1 1/4" receiver. And if you do opt for a locking hitch pin be sure to order the Part Number: S64029. The other optional 2" hitch pin Item # S64027 not work on this rack!

Great bike rack and an awesome price. No complaints I would recommend for sure.

Easy to use and mount on my Outback and feels very solid. The hold-down bars slide easily, Velcro straps simple to engage and I love the fact that it folds up. I can put the garage door down while the rack is attached to the car. It is rather heavy, but manageable. I also love the screw device at the bottom that tightens the tongue in the car hitch.

We love this rack. Both my wife and I use it all the time. I can mount and remove it in less than 5 minutes. I often transport 2 substantial ebikes. When we ride together, either of us is able to load and unload both of our bikes in less than 8 minutes. This is a solid rack and the price was definitely right. And when not in use it folds up neatly behind the bumper.

Excellent bike rack. I had a very small issue trying to hook up the hitch part, but all went well. Also, I received excellent customer service from Sara. She was very helpful and extremely friendly. It was a pleasure receiving great customer service from Sara.

We love this bike rack for its ease of use and solid construction. Bikes are quick and easy to load in and lock down tight. The hitch-receiver tightening system works great for a wobble-free rack and the hinge and locking lever work smooth and solid. It looks nice too.

So after much research into bike racks, I decided on pulling the plug on the Kuat Sherpa 2.0. I've looked into the Kuat NV and other brands, but they were just too much for my needs. If you've got "regular" bikes and not the heavier eBikes, then this rack is perfect. I wanted a hitch rack that was user friendly and not overly complicated. I have a mixed bag of bikes and this rack can handle them all, from mountain bikes, street bikes, and BMX bikes. I like that this rack comes with an adapter piece for 20"-24" wheels. Assembly of the Kuat Sherpa 2.0 is really a no-brainer. I think it's only 4-5 bolts really. Everything else is ready to go. The anti-rattle hitch ball mechanism is simple to use with just a twist of the dial, easy. The tilt pedal/lever is also easy to access should you need to open your hatch, a solid "click" assures it's in place. So far, loving this rack. Fit and finish is superb. Thanks to Jerred and etrailer for answering my questions, always helpful.

Extremely well made hitch rack. Fantastic service from etrailer.com

Works well for transporting two 29" wheeled mountain bikes. However, after one year it's starting to rust in several areas (see attached photos), and the front wheel arms are becoming increasingly difficult to raise and lower. Finally the locking cable is extremely rusty as you can see in the attached photo. I'm not sure how durable this rack will be long term.

I can't say enough good things about this bike rack.I was going to go with a cheaper model but I'm glad I spent the extra money for this Saris.The rack installs and comes off the hitch quickly.The bikes also are easy to load and unload.This thing is great.The first one got ruined by the carrier and etrailer sent me out a new one immediately.Top notch service.

Thanks to etrailer’s excellent information, I managed to find a bike rack that would carry 2 e-bikes and work with my existing class I 1-1/4 in receiver. I had the added challenge that I carry the bikes on a car that I tow behind my RV, so it needed to be rated for a tow vehicle. The Saris Superclamp EX met all my criteria, and for a reasonable price. I was also happy to find that it’s made in the USA. Install was fairly easy, couple of minor hiccup’s as I figured out the drawings, which, to be honest, weren’t entirely clear. But it’s pretty intuitive, so just added an extra minute or two, and probably wouldn’t phase the more mechanically minded. I’m a somewhat out of shape 50’s female, and I don’t have any trouble moving the rack around, it’s a nice weight and fairly compact when collapsed. It’s very easy to access the hatch when the bikes are not mounted. Haven’t tried it with bikes on yet. Once installed, it is rock solid. Loading my 45ish lb bike (with battery removed) is doable. In a perfect world it would have a ramp, but given my other criteria were met, I’m happy to do without the ramp. The rack seems like it holds the bike firmly during transport so overall, I’m extremely happy with my purchase. Also, there wasn’t a ton of unnecessary packaging to get rid of, but things were well protected in shipment. Customer service from etrailer is stellar as well, they helped quickly with a minor issue. Happy customer here!

We have two electric bikes which fit on it perfectly. Very easy to operate and hook up to our Rivian R1S. Highly recommend it!

This bike rack is awesome. Our two e-mountain bikes fit perfectly on the rack. We have taken them on long road trips with no issues. Great bike rack.

I am very pleased with this hitch! Fit my bikes very nicely. Easy to assemble. Rack looks great on my Mazda cx-30. Customer service is very responsive.

A very good, inexpensive, lightweight bike rack. Folds nicely and doesn't interfere with the hatch opening on our 2023 XC40. I wouldn't consider this a heavy duty rack, more suitable for short trips to the riding trails. Good for urban living, as opposed to 4 wheeling out to a mountain destination. Several plastic components. Two things I dislike is 1) the hitch pin lock is cheesy plastic, and because of the threading bolt on the rack's hitch, you can't use a sturdier 5/8" locking pin. and 2) the cotter pins should have a small security cable.