# 1
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
Very easy to install went right in place of the two support jacks that were broken just removed the existing self tapping screws and one bolt and the job is complete.
Just what I needed great quality and even better price. Fast shipping arived in 5 days all the way across the country.these are great jacks at a great price I would definetly by these from etrailer if I ever need them again.
# 2
Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
Just as described. Appear to be of very good quality.
Very easy to install went right in place of the two support jacks that were broken just removed the existing self tapping screws and one bolt and the job is complete.
# 3
Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs
CHEAP! CHEAP! CHEAP! This jack is a wobbly very poorly built piece of junk. Replacing a Ram brand 3500lb with this Ultra Fab 3500lb jack one would think that they would be simular. Not at all. The Ram jack is much more heavy duty. The Ultra Fab should not be rated at any more than 1500lbs. DO NOT BUY THIS FOR A TRAILER WITH MORE THAN A FEW HUNDRED POUNDS OF TONGUE WEIGHT.
I used this on a 1972 Argosy and surprising it fit into the original hole pattern. It works AWESOME--I love it and would highly recommend it to anyone!!
# 4
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
Easy to install and use. Adds stability over factory installed jacks. Quality is good.
these are very well built.
# 5
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
Installation would have been a breeze, but my trailer had a completely sealed under side which offered some challenges. That’s nothing to do with the product. The jacks are amazing, makes setup very easy with the push of a button. Should have installed these years ago.
appears to be very well made as i unboxed. in the process of installing. etrailer honored their low price promise. also got free shipping. i will be buying more stuff from them.
# 6
Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
Perfect fit for my Pull behind Motorcycle trailer project. Looks solid and fast shipping! Thanks etrailer!
Excellent product, I can't wait to install it and try it out. So far it seems very strong and capable on Do it what it was design to do.
# 7
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black
We just put this on and we love it !!! It is going to make our life a lot easier! !!
Not as good as I had hoped. Jack motor is very slow and seems weak. The twist off cap on the top loses it's o-ring each time I take the cap off to manually wind the jack.
# 8
Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs
Not as good as I had hoped. Jack motor is very slow and seems weak. The twist off cap on the top loses it's o-ring each time I take the cap off to manually wind the jack.
We just put this on and we love it !!! It is going to make our life a lot easier! !!
# 9
Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs
Great, it matched up to where old one was
Great fit
# 10
Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs
I used this on a 1972 Argosy and surprising it fit into the original hole pattern. It works AWESOME--I love it and would highly recommend it to anyone!!
very easy to install, works great.
# 11
Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs
Good product! 3 day delivery, no missing or damaged components. 2 hour install...an extra pair of hands is very helpful. I completely assembled the device, left all fasteners a litle loose, slid underneath my 36' trailer. Set width beforehand plus one half inch using jack legs to raise against trailer frame then adjusted finish width. Sure makes life easy for someone with physical limitations.
Finally got around to installing my PT II Stabilizers 30" front and rear of our 26' Surveyor. Pre - assembled them to make sure they went together ok. Luckily I had two sources for power front & rear which made wiring easy, I used a Buss block to make all positive connections, grounds straight to frame, soldered all connections and heat srinked to seal. Using the 3/8" self tappers was fun.Well got it all together and all works well makes trailer very stable, don't have to worry about scissor jacks collapsing anymore.
# 12
Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White
Ok.... the customer service from ETRAILER totally saved the review! These guys are incredibly awesome. I ordered 2 of the jacks. The first came with a broken housing cover , the light had beed disloged, and the up down switch was wired backwards. (Up would put the jack down and down would put the jack up) Solution? Glad you asked! I contacted ram about the cover.... waiting! The light was easy to correct, just had to slide it back into the slit that holds it. Switch, well.... if-your2 not comfortable with wiring, I recommend not even attempt to rewire. I just popped it out of the cover, twisted 1/2 turn, popped it back in. Total time to correct.... 8-10 minutes. Total time to install, 15 minutes. Total job less than 30 minutes. Would I recommend this jack... YES. Despite a shipping issue to crack the housing ... its easy to install, price right, powerful. I dont have to hand crank. Simple correction to the switch. And they could use some r&d improvment on the light... but excellent jack! It does what i meeded it to at an affordable price!
We recently replaced our Lippert Power tongue jack with a Ram from etrailer. The jack works well raising and lowering the trailer but the motor sounds very labored. We are concerned how long this jack will last.
# 13
Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
This was a perfect replacement for a damaged jack. This is a quality product for a very fair price. This is not my first order with etrailer.com and will not be the last. Every product I have ordered is high quality and shipped quickly. I am never disappointed.
Cathy T was most helpful with all my questions. I ordered the RAM 2,500 lbs. jacks to replace my OE jacks on my 2018 Sonic 200VML TT. My OE jacks BAL were poorly designed ,and cheaply manufactured using very thin materials (flimsy) , The RAM jacks use thicker materials ,and bolts in manufacture. RV does not wobble now.
# 14
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2
Deception in advertisin It may be my fault for not reading to total description in detail rather than glancing over it. Similar products from other companies list the weight capacity as each but this product lists the 10,000 pound weight capacity as both. They are only good for 5000 each. The [online] option was at least 6000 pounds! The only reason they were not returned is the 30in capability.
These worked out great easy to install with the circular mounting plate.
# 15
Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs
Delivery was on time, but the box it arrived in didn’t fair we’ll and parts were hanging out of the box! But everything was accounted for and the parts were well wrapped. Installation was very easy. The only issue was the locking pins mount plate is tack welded to the primary leg that the motor moves up and down. Those mounting plates had to be removed to install the lead and follow jacks. A grinder made short work of that. I didn’t put the mounting plates back on, instead I used my spring loaded pins that were on the old legs, they were still in good working condition. Also I didn’t use the adjustable cross over rod that came in the package . I opted to use the one that was on my old jacks, it was constructed of heaven gauge tubing and didn’t have a much (slop) movement in it. Also did not use the plastic housing gear box, I purchased a aluminum house gear box from e-trailer a few months back and used that one keeping the plastic for a spare. Very satisfied.
The leg pin came out because of the design, it is not a strong locking mechanism to not pull it all the way out. (My wife pulled it all the way out) Afyer furthet inspection, in addition to poor locking mechanism, the size of the pin is not adequate for the specified weight of the jack.
# 16
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
great saves my back
Not as good as I had hoped. Jack motor is very slow and seems weak. The twist off cap on the top loses it's o-ring each time I take the cap off to manually wind the jack.
# 17
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set
appears to be very well made as i unboxed. in the process of installing. etrailer honored their low price promise. also got free shipping. i will be buying more stuff from them.
Installation would have been a breeze, but my trailer had a completely sealed under side which offered some challenges. That’s nothing to do with the product. The jacks are amazing, makes setup very easy with the push of a button. Should have installed these years ago.
# 18
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black
I looked long & hard for a trailer jack that would allow the tailgate of my '14 Ram lower without inference. This is the answer that I came up with. The clearance dimension is as close as 1/2" between the tailgate & the front of the jack. etrailer personnel assisted with printed info, taking physical measurements, photos, etc. All in an effort, so I can make the best decision for my situation. The added feature of the auxiliary lights is great coupling/uncoupling in the dark or near dark. I have had this jack for approximately one year without any interruption of service. I could not even imagine cranking up & down a traditional jack. Great product choice. I would highly recommend this product.
Put this on my passport 2810BH. Tongue weights of 500lbs to 1080lbs. More than adequate power and travel distance. Easily able to lift trailer up a bit to enable weight distr bars to be installed/removed. Tow with a 2018 Ram Rebel 1500. Am able to put tailgate down and it clears the jack by about 3/4”or so. If there’s any significant offset angle between truck and trailer that tailgate clearance goes to below zero and you may scrape the tailgate on the jack. Be careful. This is with the jack mounted “straight ahead”. If you rotate the jack 120 degrees and install it ‘sideways’ you’d have more clearance. It just looks weird. The “On/Off” paddle switch is for lights only. It doesn’t turn power off to the jack. So if you hardwire it to 12V system, the “Ext/Retract” paddle switch is always live. Lots of reviews say the sun will fade the green dyed fluid in the level on top. I just made a simple bag/cover for it from a tarp. Overall, very satisfied with the jack. If you’re still hand cranking, why? This makes your life SO much easier.
# 19
Leveling Scissor Jack - 24" Lift - 5,000 lbs
Easy to install and use. Adds stability over factory installed jacks. Quality is good.
these are very well built.
# 20
Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black
The bolt pattern matched my trailer so it was very easy. No skill needed. I soldered a connection on and hooked it directly into the battery. I had to drill a hole for my foot extension. So far so good. 23 foot travel trailer.
As always a big help in getting what I need, and wanted. Good tec help, fast service. Already installed.
What our customers are saying:
"Great web site, excellent shipping service."