Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
This item does not fit your vehicle
1993 Geo Metro
These items fit your vehicle
1993 Geo Metro
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you like keeping a clean, factory look when you’re not towing, this setup makes it easy. The crossbar-style brackets sit far back on the frame, leaving the front end virtually invisible once the drawbars are removed. The partially hidden design keeps the brackets protected behind the grille, so they stay out of sight and safe from scrapes and scuffs.
Getting connected is quick with the twist-lock drawbars. Each arm inserts into the bracket, clicks to lock in place, and secures firmly for towing. When it’s time to disconnect, built-in pull rings let you unlock and remove the arms just as easily. It’s a simple, repeatable motion that makes setup and breakdown smooth every time.
This kit uses computer-cut, all-steel construction for exceptional strength and a precise fit. The black powder coat finish adds durability and corrosion resistance that stands up to years of road use. Once bolted to the frame, the base plate provides solid attachment points that spread towing forces evenly while keeping everything aligned mile after mile.
Installation is straightforward—no welding required. The kit bolts directly to the vehicle’s frame and comes with instructions and mounting hardware. Integrated mounting points make it simple to attach an electrical connector plug or bracket (sold separately), so your wiring can stay neatly organized right up front.
If you already run Roadmaster towing gear, this base plate fits right in. It’s compatible with Roadmaster tow bars when used with the quick-disconnect crossbar (910021-00?– sold separately). That means you can connect your existing system without replacing major parts and still get a secure, reliable towing setup.
Ratings & Reviews
Install pretty easy. You will have to change directions of one bolt due to obstruction ( frame). Cannot torque a few of the bolts. These are the ones with wire attached.
Rock guard needed addition trimming from factory instructions.
Awesome delivery speed, and a well made base plate for my 2007 Element. Installation was a breeze (thanks to my son’s heated shop) and I had to do no cutting to make this fit. I had a Stowmaster tow bar that came with my RV and etrailer was able to steer me to the correct missing parts to make this a really affordable installation. Now to get out of this snow!
Purchased for a 1997 Subaru Impreza. Delivery was amazingly fast! I didn't have it installed until a few months later, as my travel plans had stalled. It didn't quite bolt right on, but was close, and a friend had to modify it some to make it work. I still hear a grating noise when I turn too sharp on one side, but otherwise it's fine.
The front connection plates didn't line up with the holes, so had to have those modified, as well, in order to line up and attach to the tow bar. Once the new holes were drilled, I was able to hook up and go.
It's relatively easy to connect after finding a way to do it alone.
I've towed from CO to TX and all over TX with it with no problems.
I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.
Fit and finish is great, the illustration for what you trim on the bumper isn't great but otherwise pretty easy install (I ended up measuring between the mounts on the draw bar and just trimmed accordingly)
After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.
Overall the installation was great, however the process of drilling 3 - 1/2" holes in that little bumper that has a Rockwell Hardness of about 60, seems to be a bit over the top.The instructions are spot on, delivery was great, the quality of product was accurate. I am a happy boy!
Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.
The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.
Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.
Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.
Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.
The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier
Great product. Well made and easy to setup.
One year and thousands of miles later ~ Still performing Perfectly!
This product was easy to install and works fine for me. I have towed the car for over 6,000 miles since install and have not had any problems with it.
The quality is top notch. Fits my car like Cinderella's slipper.
Excellent product, Excellent shipping... WILL be using in the future...THANKS!!!!!!!!!!
I ordered a Roadmaster tow hitch and all the parts required to install on a 2012 ford focus. It only took a couple on days to get to my house in Colorado. I just finish installing and it works greats. Thank you etrailer.
Unit arrived as promised. All parts were accounted for, instructions were clear and structure appears beefy enough to handle towing without issue.
Very pleased with the base plate kit. Arrived on time and a good price
Perfect fit with detailed installation instructions.
As always roadmaster went above and beyond on construction. Super solid installation. I mean the only thing I wish roadmaster would make custom steal brushgaurds that you can adapt there amazing towbar too.
Excellent parts, Fast shipping Great person i ordered from.
Kevin L.
7/27/2015
excellent
The installation when well. The only issues are:
1. The directions do not tell you how to unbolt the front fascia from the fenders (drivers/passengers) side. It required unbolting 2 bolts on each fender.
2. Need to put a note in the instructions to have a step drill bit for the front bumper core. This metal was very hard and I used up 12 drill bit before I went to the store to get one for hardened metal.
Other than that the items went together very well and have already tested the tow bar.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Theodore
6/26/2023
Just finished another 7,000 trip this am. The baseplate still works flawlessly.