Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
This item does not fit your vehicle
1992 Ford F-150
These items fit your vehicle
1992 Ford F-150
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This crossbar-style base plate keeps your front end looking clean when you’re not towing. The visible portions of the brackets can be removed with two pins, leaving the mounts virtually invisible within the grille. Once the drawbars are off, there’s no bulky hardware left to bump into or spoil the factory look, and the brackets stay protected from scrapes and scuffs.
The base plate is made from computer-cut, all-steel components that provide exceptional strength for secure towing. Each piece is built to line up cleanly for a precise fit and includes a black powder coat finish that’s durable and corrosion resistant. This design eliminates the need for welding and bolts directly in place using the included mounting hardware.
Each square drawbar slides easily into the bracket and secures with hitch pins, so getting hitched up takes just a minute. The design pairs with a quick-disconnect crossbar (910021-00, sold separately) for compatibility with Roadmaster tow bars. It’s a straightforward system that makes connecting or removing your setup smooth every time.
Custom base plates ensure a perfect fit for your vehicle’s frame so towing forces stay evenly distributed. The sturdy brackets give you reliable attachment points for long hauls and steady tracking behind your motorhome. Instructions are included to guide a simple installation, and the design supports years of dependable use once mounted.
Ratings & Reviews
After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.
I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.
Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.
The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.
Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.
Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.
Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.
The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier
Great product and great service.
Quick communication, fast shipping and delivery! Very impressed with speed. This was my second purchase from etrailer and both have been the same, excellent! Thank you!
Worked exact ally as described. Bolted right up, quick and easy. And super fast shipping.
Fit my Jeep perfectly taking the front fascia off was the biggest pain .
Nice unit. Fairly easy to install. Had no problems last trip, loading up for another in two weeks.
Installation was easy thanks to all holes matching up. It took a few hours to complete but was a successful installation.
We requested it be delivered ASAP and it arrived at just the right time. Product works perfect. It was easy to installand took about 1 hour without any experience with this kind to attachment. Directions to attached to vehicle were correct and easy to follow. Had to figure out the reciever attachment for my self. Not that hard to figure out. Would recommend product.
Fast delivery and good customer service! I ordered online and made an error that ended up as a double order. I called and the problem was immediately fixed and there were no issues with the products or my payment. I received it within 2 day! Amazing! Right product, right fit for my Jeep and clear instructions to install.
Found fit for passenger side bracket was a little tight in fitting against radiator, this could be due to being a v8 Jeep Grand Cherokee.
All ended well just a little aggravating that the bracket was so close on fitment.
I would buy again should the need arise
Your sales representative was great his name is Brent J I have opened up the box and the parts look to be in really good condition and complete. I have yet to install the parts I will be doing that today. I’ll be more than happy to fill out the form to let you know how it pulls and how easy the connections were. Thank you for yawls prompt service. I never expected it to get to me so quickly and that’s a great thing. I will be ordering more parts from Brent he has a sent me a list Of options that will fit on my Winnebago for suspension and air ride.
item attached as directed. The only thing I would change is that
they provide the wire tool to help put the top two bolts in around
the top attachment. I looked on youtube and etrailer had a very nice video how to install with the part number for the wire threader.
This Roadmaster Base plate is absolutly the strongest for safe towing. 1/4" base plate. Everything is heavy duty. Everything FITS perfectly and hole LINE UP!! One TIP - the 4-10mm x 1.5 x 45mm bolts would not fit my 2002 Gran Cherokee. INSTEAD get 8.8 hardness 3/8 x 16 thread (NC) x 1 1/2 inches long. This is the thread thats in the 2002 Grand Cherokee frame. Everything else is good to go. I would recommend this product and am VERY HAPPY. Installed about 1 hr. No hurry I'm 70. Will pull behind my truck camper with confidence 8^). Best price AND service from etrailer as always. Oh and get the fish wire bolt leader.
High quality materials
Precise fit in a very tight space
6-8 hour install
No jacking or vehicle raising required.
Fast delivery
Good price
2002 Jeep Grand Cherokee Limited
Great product, shipping was FAST. Instructions were adequate, but minimum - this was not surprising, you have to know how to bend wrenches to install something like this yourself.
I had a factory-installed tow hook on each side that had to be uninstalled, but once you remove the front bumper shroud it is easy to remove and all the bolts are easy to remove. Once the hook was out of the way, easy-peasy!
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stephen
12/7/2020
Works fantastic! Install was relatively easy, I made adapter plates for my Husky tow bar. Nice!