Product Experts Available Now!
Call 1-800-940-8924
Curt Adjustable 2-Ball Channel Mount - 2-1/2" Hitch - 10-3/8" Drop, 8-7/8" Rise - 20K
(602 reviews)
Price: $453.50
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Curt Adjustable 2-Ball Channel Mount - 2-1/2" Hitch - 10-3/8" Drop, 8-7/8" Rise - 20K
Part Number: C45927
In Stock
$453.50
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (602)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45927
Highlights
- 20,000 lbs GTW for Heavy Loads: Handles large campers, boats, and equipment trailers with the 2-5/16" ball.
- 10-3/8" Drop or 8-7/8" Rise for Level Towing: Adjusts to keep multiple trailers level behind your truck.
- Two Hitch Balls in One Mount: 2" ball rated 10,000 lbs and 2-5/16" ball rated 20,000 lbs for different couplers.
- Anti-Rattle Design for Quieter Towing: Built-in feature cuts down noise and movement in the receiver.
- Strong Steel with Corrosion Protection: Heavy-duty steel, black powder coat, and zinc-coated balls resist rust.
- Channel Mount Adjusts in 1" Increments: Fine-tune trailer height without swapping hitches or tools.
Features to know about
Keeps Every Trailer Level: 10-3/8" Drop or 8-7/8" Rise
When you’re towing more than one trailer, getting the height right makes all the difference. This adjustable mount moves in 1" increments for precise leveling and can be flipped for up to 10-3/8" of drop or 8-7/8" of rise. That means you can match your boat, camper, or equipment trailer perfectly without swapping mounts or fighting uneven loads.
Built to Haul Heavy Loads: Up to 20,000 lbs GTW
This mount isn’t just adjustable—it’s built to handle real weight. The 2-5/16" ball is rated for 20,000 lbs gross towing weight and 2,000 lbs tongue weight, while the 2" ball takes on up to 10,000 lbs GTW and 1,000 lbs tongue weight. The steel shank slides into a 2-1/2" hitch receiver and locks in tight with a 5/8" pin. It’s heavy-duty gear that holds steady under serious load.
Quieter, Smoother Towing: Built-In Anti-Rattle Design
Nobody likes the clang and rattle that can come with towing. The built-in anti-rattle feature helps cut down on noise and slop in the hitch so your trailer tracks quieter and smoother out on the road. Even over rough pavement, everything feels more solid behind you.
Tough Finish That Lasts: Powder Coat and Zinc Protection
Rain, salt, and road grime take a toll on towing gear, but this mount is ready for it. The channel mount has a black powder coat finish, while both hitch balls use a zinc coating that resists corrosion trip after trip. You can leave it installed full-time without worrying about rust taking hold.
Ready for Add-Ons: Channel Mount with Extra Options
The channel-style design does more than adjust height—it also lets you attach a pintle hook (sold separately) when you need it. Two hitch pin holes let you choose between an 11" or 12" shank length for even more flexibility in setup. It’s a solid system that adapts easily to whatever you’re hauling next.
Specs
Application
- Application: 2-1/2" x 2-1/2" trailer hitch receivers
Weight and Capacity
- Gross towing weight:
- When used with 2" ball: 10,000 lbs
- When used with 2-5/16" ball: 20,000 lbs
- Tongue weight:
- When used with 2" ball: 1,000 lbs
- When used with 2-5/16" ball: 2,000 lbs
Dimensions
- Distance from center of hitch pin hole to center of ball:
- Hitch pin hole closest to ball: 10-3/4"
- Hitch pin farthest from ball: 11-3/4"
- Distance from center of hitch pin hole to center of adjustment holes:
- Hitch pin hole closest to adjustment holes: 7-1/4"
- Hitch pin hole farthest from adjustment holes: 8-1/4"
- Distance from center of hitch pin hole to closest point of the support gusset:
- Hitch pin hole closest to gusset: 3"
- Hitch pin hole farthest from gusset: 4"
- Maximum rise: 8-7/8"
- Maximum drop: 10-3/8"
- Distance between vertical adjustment holes: 1"
- Pin hole diameter: 5/8"
- Interior channel width: 3"
Warranty
- Limited warranty: 1-year
45927 Curt Channel Style Adjustable Ball Mount - 20,000 lbs
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
602 reviews
by:
Mike
03/29/2020
Easy to install and allows my tailgate to still open without hitting. Gives me full range to adjust height for multiple trailers and easy to change to ball insert.
In addition to a great product this company is amazing!!! I ordered and they shipped same day and I had within 48 hrs. This is a customer experience that i will share!!!
In addition to a great product this company is amazing!!! I ordered and they shipped same day and I had within 48 hrs. This is a customer experience that i will share!!!
by:
Ken
10/23/2025
service and delivery is great! This thing is built like a M1 Abrams.....
Williams to care of my order entry mistake and got the correct item out the same day. what a great guy!
thanks for the great service and virtually unlimited product line.
Ken K
Williams to care of my order entry mistake and got the correct item out the same day. what a great guy!
thanks for the great service and virtually unlimited product line.
Ken K
by:
Daniel
10/14/2022
Nice hitch but was sent a repackaged hitch instead of brand new in curt box
by:
Kenneth
08/21/2022
Super heavy duty hitch!!!!
by:
Jonathan
09/23/2020
Good product. Fast shipping! Well worth the money. Customer service was outstanding.
by:
Thomas
07/21/2023
I wish those balls where at right angles for ground clearance
by:
Nick
04/30/2025
Great product, built strong! Highly recommend.
by:
Matt
09/18/2023
Awesome setup. Extremely rugged and easy to use. I have one on each truck
by:
Fred
08/15/2026
by:
Kevin
09/22/2022
What a *nice* piece of kit! Was a challenge to find a setup for my new lifted truck, but this is the bees knees!
by:
Matt
09/13/2022
by:
Kenneth
10/01/2022
by:
Alex
02/12/2026
by:
Thomas
09/12/2021
by:
Craig
05/19/2023
by:
Tyler
02/06/2021
by:
Jesse
11/29/2024
by:
Jeff
05/25/2023
by:
Bart
08/29/2026
This ball mount has been working quite well for us; our old Airstream needs the 2 5/16" ball fairly high, and our boat trailer needs its 2" ball about 4 inches lower. This ball mount makes it simple to switch back and forth w/o tools and without carrying multiple mounts. Our equipment trailer and utility trailer have their own preferred heights; this unit handles all of them. There's also enough shank to use our Rock Tamers with the Airstream.
by:
David
08/06/2025
Appears to be well made. Arrived as promised, packed well.
Easy installation. I haven’t pulled one of my loaded trailers with it yet. I really dislike reviews from people that admit they haven’t installed or used a product. I will update this review aftertowing a couple hundred miles. In closing, I have been purchasing from etrailer for several years, great company, knowledgeable staff. I highly recommend etrailer. They never gave me poor advice or sold me a bad product.
Easy installation. I haven’t pulled one of my loaded trailers with it yet. I really dislike reviews from people that admit they haven’t installed or used a product. I will update this review aftertowing a couple hundred miles. In closing, I have been purchasing from etrailer for several years, great company, knowledgeable staff. I highly recommend etrailer. They never gave me poor advice or sold me a bad product.
by:
Gregory
08/20/2026
This is a solid, heavy duty, and well built product. Use 2 hands inserting and removing from the receiver.
by:
Jon
12/23/2019
New GMC AT4 required a new ball mount and this one fit all the requirements for the truck and new multi-pro tailgate. With the AT4, I needed more drop and a longer shank (12" hole) for the tailgate to not hit my trailer jack stand; plus, the multiple drop adjustments will make changing trailers a snap. Great product from Curt and great service from etrailer (as usual).
Jon
12/26/2020
Wow, this puppy works like a champ after one year of use. I pulled my trailer and Ranger to 26 NSCA tournaments with no issues and smooth, noiseless travel on these long hauls.
by:
Johnathan M
04/03/2019
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
by:
JohnnyB
09/28/2017
Excellent product. Installed in minutes. I tow a 14 k lb dump trailer. Needed the additional rise on the hitch. The draw bar is adjustable so that I can tow my utility trailer as well. High quality like most products I have purchased from etrailer.com
Johnnyb
10/1/2018
Very good except the Rubber s have worn causing hitch to vibrate
by:
Dan
03/18/2026
It is a good product with good selectibility to tailor your ball height to your towed trailer. I like the anodized ball coating to prevent rust in our harsh MN winter climate. I would buy again.
25
602
true
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Can Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks Have 20k CapacityHey Luke, yes the Curt ball adapter part # C29NR does fit the weight distribution shank you have now and since the shank was designed for 2.5 inch hitches it would give you the full 20k capacity. The part # C45927 is a different approach to the same thing but is basically a 20k adjustable ball mount like you said you'd want as well. I wouldn't say it's better but since you already have the shank I'd go with the # C29NR.
view full answer... - Does Curt Adjustable 2-Ball Channel Mount For 2-1/2" Hitch & 10-3/8" Drop Come With PintleHey Colt, I did a lot of searching and unfortunately the Curt Adjustable 2-Ball Channel Mount for a 2-1/2" Hitch # C45927 does not come with a pintle hook-only attachment, and there isn't a similar option for a 2-1/2" hitch with a rise/drop similar to the 10-3/8" Drop, 8-7/8" Rise this mount has. I know it's not what you wanted but just to be thorough, you can use this mount with Pintle Hook # C45922 and Pins & Clips # C45925.
view full answer... - Overall Height of 2.5" Curt Adjustable 2-Ball Channel Mount While At Lowest SettingThe distance from the top of the shank to the bottom of the hitch ball at the lowest setting on the Curt Adjustable 2-Ball Channel Mount part # C45927 is 14-3/8". I went out to our warehouse to measure this for you.
view full answer...
- Locking Pins for Curt Channel Style Ball MountsWe have just what you're looking for to lock the hitch ball onto the channel mount of the Curt # C45927. I recommend using the Curt Lock Set for Adjustable Channel-Style Mounts # C23556, which is designed to work with this series of Curt channel style ball mounts. I've linked a short review video of this lock set for you to have a look at.
view full answer... - Curt C45927 2-Ball Channel Mount For 2020 Ram 2500The # C45927 is compatible with a 2-1/2 inch receiver. If your 2020 Ram 2500 has the 2-1/2 inch receiver, the # C45927 would indeed be the correct fit. The gold finish you refer to is a zinc coating for corrosion resistance and its the only finish the ball is available in. If you click the provided link, you can see a product demonstration video featuring the # C45927 ball mount.
view full answer... - Is Replacement Shank Available for Curt Adjustable 2-Ball Channel Mount with 10-3/8" DropThe Replacement Shank # C45917 is for the Curt Adjustable 2-Ball Channel Mount # C45902 which has a 5-1/4" rise/6" drop. I reached out to Curt and my contact said that at this time (July 2020) there is no replacement shank for the Curt Adjustable 2-Ball Channel Mount # C45927 so you'll have to pick up the entire ball mount to use this shank.
view full answer... - Distance From Bottom of Channel to Top of Shank on Curt 2-Ball Mount C45927The distance is 13 inches from the bottom of the channel to the top of the 2-1/2 inch shank on the Curt Adjustable 2-Ball Channel Mount - 2-1/2" Hitch - 10-3/8" Drop, 8-7/8" Rise - 20K # C45927.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Video by:
Andrew K
Edited by:
Lindsey S
Installed by:
Colin H
Installed by:
Kathleen M
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Kristina F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
11/1/2022
I am sorry that this did not show up to your expectations. We do not sell any returned or used items. However, we do have a demonstration team that takes our product and does a temporary installation in order to get videos and pictures of the item in use. It is our policy to make sure that the item is still in good or new condition before it gets put back on the shelf for sale.