See what our Experts say about this CURT Trailer Hitch Ball Mount

• Trailer Towing Setup Recommendation for 2014 Buick Enclave
  You are on the right track! The Draw Tite hitch part # 75528 is a confirmed fit for your 2014 Buick Enclave as well as the trailer wiring kit # 118270. The wiring mount part # 18144 will also give you a place to mount the 4-way that bolts to the bumper. The ball mount part # C45036 that you referenced is would also work well if you need 2 inch drop. I attached a help article that details how to pick out a ball mount drop as well.
  view full answer...
  
• Length of Curt Towing Starter Kit for 2 Inch Trailer Hitches
  I'm not 100 percent sure I know the exact dimension you are referring to by center of the hitch pin hole to where you slide the mount up to the receiver, but I believe you are asking about the hitch pin hole to the rear of the Curt Towing Starter Kit for 2" Hitches # C45554. It is approximately 2-1/2" from the center of the hitch pin hole to the rear of the ball mount, and 8-1/4" from the center of the hitch pin hole to the center of the hitch ball. I have added links to a pair of video...
  view full answer...
  
• Recommended 2024 Kia Telluride Trailer Hitch, Wiring, and Ball Mount Kit for Towing a Trailer
  To tow a trailer with your 2024 Kia Telluride you'll need a trailer hitch, wiring, and a ball mount. Here are the parts I recommend for doing so: - etrailer Trailer Hitch Receiver # e45ZR - Wiring # C59236 for Standard Telluride OR # C93FV for LX and S models without LED taillights - Mounting Brackets # 18144 and # C57202 - Curt Towing Starter Kit # C45554 I really like the etrailer hitch because of the durable matte black finish, the Curt wiring is very reliable, and then the towing...
  view full answer...
  
• Can EcoHitch Handle Half Ton Trailer With 2022 Honda HR-V
  As long as your 2022 Honda HR-V is capable of towing that much yes, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7322 can handle it. The maximum gross trailer weight for this hitch is 2,000 lbs. The same is also true for the Draw-Tite # DT84YR you were looking at. If you plan on towing you will also need wiring and a ball mount. The T-One Vehicle Wiring Harness # 118673 plugs into the connection points in your rear cargo area. This is the most reliable option when it comes to wiring....
  view full answer...
• 2001 Jeep Cherokee Trailer Hitch, Wiring, and Ball Mount Recommendations
  I recommend the following parts to get your 2001 Jeep Cherokee ready for towing a trailer: - etrailer Trailer Hitch Receiver # e97AR - Curt T-Connector Vehicle Wiring Harness # C55354 - Mounting Brackets # 18144 and # C57202 - Curt Towing Starter Kit # C45554 I really like the etrailer hitch because of the matte black finish that does a great job at hiding scratches from road debris, and then the mounting brackets allow you to keep the 4-Way next to your hitch receiver. The ball mount...
  view full answer...
• Differences Between Curt Trailer Hitch And Etrailer Trailer Hitch For A 2023 Nissan Murano
  When choosing the correct trailer hitch to install on your 2023 Nissan Murano there are currently two choices to choose from but are very similar. There is The etrailer Trailer Hitch Receiver # e98907 and then there is The Curt Trailer Hitch Receiver # C13205. Both hitches are made in The USA and both have a towing weight capacity up to 3,500 pounds and have a maximum tongue weight up to 350 pounds, but there is one thing different which makes one better then the other. I recommend The...
  view full answer...
• Difference Between EcoHitch, Curt and Draw-Tite 2 Inch Hitches for 2020 Subaru Forester
  What sets the EcoHitch # 306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is the best option to retain the OEM look of your Forester. EcoHitches are made in the USA and are constructed of recycled aluminum, steel and stainless steel, making them slightly lighter and more eco-friendly. The Curt # C13409 is assembled in...
  view full answer...
  
• Replacement Arm Assembly For A 58 Inch Lippert Edge
  We have just the replacement arm for you! Depending on if you need the drive arm or the idler arm we both options available. The Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED is 58 inches long and will replace the drive arm on your Lippert Edge. The Replacement Idler Arm Assembly for Lippert Edge # LC62ED is the same but for the idler arm. Both come in a white color. You will have to use your current hardware to mount them.
  view full answer...
• Best Hitch And Wiring Harness For A 2024 Subaru Crosstrek
  Yes we do! I can definitely help get you set up. For your 2024 Crosstrek I recommend the etrailer class 3 hitch # e98912. This is rated to tow 3,500 lbs and has a 525 lb tongue weight capacity. For the 2024 Crosstrek models, Subaru added a transmission cooler and increased the vehicles towing capacity to 3,500 lbs. So you will be able to use this hitch to its full carrying capacity. This will be a fairly simple no drill install. You will have to use the included bolt leaders to fish the...
  view full answer...
• Curt Vs Etrailer Hitch For A 2023 Subaru Outback Wagon
  Though both hitches are very similar for your 2023 Subaru Outback Wagon I recommend The etrailer Trailer Hitch Receiver # e25TR. I like the etrailer hitch better than the Curt trailer hitch because the etrailer hitch has a matte black powder coating finish which will help conceal scratches and scuffs better than the Curt hitch would. Both hitches have a bolt-on installation. When installing a trailer wiring harness onto your 2023 Subaru Outback Wagon I recommend The T-One Vehicle Wiring...
  view full answer...
• Recommended Trailer Hitch For A 2023 Kia Sportage HEV
  When installing the etrailer Trailer Hitch Receiver # e38KR onto your 2023 Kia Sportage HEV the rear bumper will not need to be notched. You will need to lower the exhaust for ease of installation. The Underbody panel(s) and or fascia must be temporarily loosened or removed and you may have trim to reattach the panel or the fascia. I recommend the etrailer hitch over the Curt hitch # C94WR because the etrailer hitch has a matte black finish that will make scratches and scuffs that you...
  view full answer...
• Recommended Hidden Hitch For A 2022 Toyota RAV4
  The EcoHitch Hidden Trailer Hitch Receiver # EH97FR is going to be the closest hitch to a factory installed hitch. The EcoHitch cross tube will install behind your RAV4's rear bumper, leaving only the receiver visible beneath it, which will provide you with a clean from the factory look. The EcoHitch has an easy, bolt-on installation with no drilling or welding required. When installing a trailer wiring harness I recommend the Curt Vehicle Wiring Harness # C56434. I like this wiring harness...
  view full answer...
  
• Will Curt and Draw-Tite 2" Trailer Hitches Both Fit a 2023 Kia Sportage PHEV
  Yes, both the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT22MR and Curt Trailer Hitch Receiver part # C94WR are fits for a 2023 Kia Sportage PHEV per the respective manufactures. They are also both great options for this vehicle. The main difference is that the Draw-Tite hitch has a bracket welded on for a towing connector so that is what I'd go with if you do plan to tow but if you're just using it for bike racks and cargo carriers then go with the Curt hitch. Please note, if...
  view full answer...
• Recommended Trailer Hitch/Trailer Wiring For A 2023 Honda Passport
  When installing a trailer hitch onto your 2023 Honda Passport I recommend The Curt Trailer Hitch Receiver # C13421. I like the Curt hitch because it has a concealed cross tube so when installed your Honda will have a clean off the factory look. The Curt hitch is manufactured in the USA. When installing a trailer wiring harness, I recommend the Curt T-Connector Vehicle Wiring Harness # C56291. This harness has a powered converter that will help reduce the strain on the wiring system and...
  view full answer...
• Recommended Trailer Hitch for a 2023 Toyota Tacoma
  Yes, the Curt Trailer Hitch Receiver part # C13264 is a confirmed fit for a 2023 Toyota Tacoma. I verified this with Curt for you. It features a simple bolt-on install with no drilling required. It has a class III rating with 2" opening for use with hitch mounted accessories or towing. Please note, if you will be towing then you'll also need a trailer wiring harness for which I recommend the Curt T-Connector Vehicle Wiring Harness part # C56349 which is plug-in play. The only other parts...
  view full answer...
• Recommended Hitch for a 2023 Toyota Highlander Hybrid
  The trailer hitch that I recommend for a 2023 Toyota Highlander is the etrailer Trailer Hitch Receiver part # e75ZR which is a fit for all models, including the Hybrid. It features a bolt-on fit without any drilling required. In order to complete your towing setup you'll also need a wiring harness like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # TK99FR and a ball mount kit like the Curt Towing Starter Kit part # C45554. Unfortunately, the Highlander is on...
  view full answer...
• Parts Needed For Towing a Trailer With a 2023 Kia Carnival
  First you will need the etrailer Trailer Hitch Receiver # e36KR for your 2023 Kia Carnival. This will give you a 2" receiver which will allow you to use the Curt Towing Starter Kit # C45554 which includes the ball mount, 2" ball, pin and clip and locking hitch pin. The Vehicle Wiring Harness # C59236 will give you a 4-way flat connection for the lights on most small trailers. If you will be pulling a trailer with electric brakes you will need to add the Universal Installation Kit # ETBC7...
  view full answer...
• Difference Between Curt and Draw-Tite Hitches for 2019 Subaru Crosstrek
  Yes, the biggest difference between the Curt trailer hitch # C13382 and the Draw-Tite Max-Frame hitch # 76209 is that cross-tube on the Curt hitch is hidden behind the bumper, whereas on the Draw-Tite it's fully visible as shown in the comparison photos on a 2019 Crosstrek I've attached. For this reason, I recommend the # C13382. The installation on both hitches is pretty straight forward, requiring only to lower the muffler, insert the hardware in the frame and raise the hitch in place...
  view full answer...
  
• Is Trailer Wiring Harness Needed for a 2017 Jeep Cherokee
  The etrailer Trailer Hitch Receiver part # e62TR is an excellent option for a 2017 Jeep Cherokee and a confirmed fit. It provides a 2" opening which is great for towing or hitch mounted accessories like bike racks and cargo carriers. It also offers a completely bolt-on install so no drilling is required. In regards to a trailer wiring harness like the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56208 which is what I recommend. This is only needed...
  view full answer...
• Recommended Trailer Hitch For A 2021 Hyundai Palisade
  Though all our trailer hitches that are confirmed to fit your 2021 Hyundai Palisade are very similar, I recommend the etrailer Trailer Hitch Receiver # e95ZR. I like the etrailer hitch over the others because the etrailer hitch has a matte black powder coating that will hide scratches and scuffs better that you would receive from flying rocks and road debris while towing. The other hitches have a gloss black paint which shows the scuffs and scratches more frequently. Since you're towing...
  view full answer...
• Is Curt or etrailer Hitch Easier to Install on a 2008 Volvo XC90
  When it comes to the installation, both the Curt # 13559 and etrailer # e45KR hitches for your 2008 Volvo XC90 are the exact same. I recommend going with the etrailer because it has a matte black finish that helps it blend in with black trim on your vehicle and also helps to hide any scratches that might occur from road debris. To complete your towing setup you also need the T-One Wiring # 118411 to operate the lights on the trailer (use mounting brackets # 18144 and # C57202 to secure...
  view full answer...
• What Bolts Are Used To Install Etrailer Hitch # e98854 Onto A 2016 Chrysler Town And Country
  When installing The etrailer hitch # e98854 onto your 2016 Chrysler Town and Country it uses the existing M10 and M12 bolts that should be present on your vehicle. Since your hardware is missing you will need to contact your vehicle's dealership to get the correct hardware. If you buy standard hardware from a hardware store it will take away the warranty of your trailer hitch. The etrailer hitch in my opinion is the best hitch that we offer for your Chrysler Town and Country because it...
  view full answer...
• Trailer Hitch For A 2023 Jeep Wrangler Unlimited EcoDiesel
  We have the perfect trailer hitch that is confirmed to fit your 2023 Jeep Wrangler Unlimited EcoDiesel! The Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR has an easy, bolt-on installation with no welding required. It has a black powder coated finish that covers an e-coated base which offers a superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 4,500 pounds and has a maximum tongue weight up to 675 pounds. I would recommend checking your vehicle's...
  view full answer...
• Trailer Hitch Package For A 2023 Hyundai Palisade
  Yes, Per the manufacturer The etrailer Trailer Hitch Receiver # e95ZR is confirmed to fit behind the removable cover on the 2023 Hyundai Palisade. The wiring harness has been changed, The Curt Wiring Harness # CU94FR is confirmed to fit your 2023 Hyundai Palisade. The trailer hitch has an easy, bolt-on installation and has a matte black powder coat finish that covers the e-coat base offering a superior rust protection. It also will help keep scratches and scuffs that you receive while...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?