Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling serious weight, you need a mount built to handle it. This BulletProof Hitches 2-Ball Mount pulls up to 12,000 lbs on the 2" ball and a massive 36,000 lbs on the 2-5/16" ball. The solid steel construction and welded gusset keep everything rigid and stable under pressure, so you can tow heavy trailers or equipment without second thoughts.

Different trailers mean different heights, but this setup makes it easy to match them all. The adjustable channel gives you 7 mounting positions for precise alignment. Just slide the ball platform where you need it, lock it in with the included pins and clips, and your trailer sits level every time. It’s built for flexibility, whether you’re towing a boat one day or a camper the next.


This mount isn’t just strong—it’s built to stay that way. The 5/16" thick channel plates and 1/2" welded gusset brace the shank to prevent bending at full load. A matte black powder coat finish protects against corrosion and road grime, while CNC-chamfered edges make it easier to slide in and out of your receiver without chipping the coating.


Securing your hitch matters as much as the pull itself. The InfiniteRule Locking Pins #34061674-D are made for this setup, giving you three stainless steel locking pins keyed alike with a shear strength of 42,000 lbs—well above the hitch’s own rating. Once locked in place, your mount stays secure and solid mile after mile.
If your towing setup changes over time, this mount can grow with you. It pairs with available BulletProof accessories like weight distribution shanks, clevis or shackle attachments, and hitch steps (each sold separately). That means one heavy-duty mount covers your towing, recovery, and utility needs without swapping hardware.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a look at this BulletProof Hitches Extreme Duty Adjustable two-ball mount for 2 1/2-inch hitches. This adjustable ball mount has a maximum capacity of 36,000 pounds, making it ideal for extreme heavy-duty towing. Now, this shank is going to slide into your 2 1/2-inch hitch receiver on your vehicle, and it's ideal for vehicles with 28 to 30 inches of clearance from the ground to the bottom of the inside of the receiver tube. The adjustable height lets you tow trailers of different heights with the same vehicle. The hitch ball platform slides up or down the channel and secures in place with the included pin and clips.
Now, this adjustable channel is made of 5/16 of an inch thick laser-cut steel plates, and these steel plates can handle high capacities without bending. And because of the laser cutting, the channel plates have consistently sized pinholes, so you can easily remove and position the hitch ball platform. And I'm just gonna show you how easy that is. I'm gonna remove our clips, remove our pins, and right now I have this on the 2 5/16-inch hitch ball. I'm just gonna turn it over to the two inch and lower it a little bit, and I'm just very impressed with how easy it is to remove these pins and replace them.
As you can see, you're not gonna be struggling with these at all when you want to adjust the ball platform. So they're gonna very easily slide right into place and then you can be on your way. Now, these pin and clips are made of heat-treated steel to withstand the heavy weight from your load, and that zinc finish is gonna provide corrosion resistance. As you can see, we have nine adjustment holes that's gonna give you seven mounting positions, providing a maximum drop of about 13 1/4 inches. And if you flip this over, you're gonna get a maximum rise of about 13 inches, and the adjustment hole diameter is 5/8 of an inch.
Now, you can tow up to 12,000 pounds with this two-inch ball or up to 36,000 pounds with the 2 5/16-inch hitch ball. The maximum tongue weight capacity is 6,000 pounds, and these hitch balls are welded onto the ball platform for extra sturdiness. This is made of a heavy-duty steel construction that's strong enough to handle trailers and heavy-duty cargo. And the matte powder coat finish is not only attractive and not only is gonna make this look great on the back of your vehicle, but practically it's going to protect the ball mount from rust and corrosion, even after repeated use. This is a thick application of powder coat, so it's textured as well, so it's not gonna easily chip off or peel off.
Now, this extreme duty version by Bulletproof is constructed of a different grade steel than their heavy-duty ball applications. So just making it very durable and well-built for those extreme towing conditions. This solid steel shank is CNC Chamfer, making it easy to slide the shank into and out of your hitch receiver, so there's no sharp edges on the shank itself and that powder coating is less likely to chip and peel. The hitch pin hole diameter is 5/8 of an inch. And I do wanna point out that this does not come with a pin and clip or with a hitch lock. So if you do not have a pin and clip, that would be a separate purchase. However, I would recommend checking out the hitch locks here at etrailer.com to secure this investment to the back of your vehicle. This half-inch-thick steel gusset is welded between the shank and the channel, bracing the mount and keeping the channel from bending, even at maximum drop or rise. And this adjustable ball mount is compatible with a wide variety of accessories that are sold separately. So for instance, instead of using the included ball to tow, you can install a weight distribution shank in the channel of the mount to attach your weight distribution system. You could add a clevis or shackle attachment for off-road or recovery operations, or just simply add a hitch step to easily access your truck bed. Check out the Related Products section on this Product Page to see those options. Speaking of this Product Page, we do have a detailed diagram of all the important measurements that you are going to find helpful to make sure and confirm that this is going to work for your application. So again, this is for extreme heavy-duty towing applications. The total weight of this is about 84 pounds. Now, this is SAE-J684-certified. This does have a limited lifetime warranty. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews

Mike L.
9/30/2026
We're processing the return right now Kevin.

David
1/29/2026
Still excellent and holding up well.

Brooke M.
5/13/2025
Their packaging is, would you say...bullet proof? [slaps knee] haha! What are you towing with such stout equipment?

Ed T.
10/4/2021
Great - did 9k miles in early summer with no problems.

Colton
1/16/2022
Love this hitch. Best hitch I have ever owned.

Robert C.
11/13/2021
It has worked out great. I have used it extensively on 5 different trailers with our 6 lifted truck. Not only has it been extremely versatile but overloaded tongue weights as well.

Katrina B.
4/12/2022
This is not common as the hitch is covered with a high quality powder coat. If you ever get any paint chips or scratches on this ball mount, we recommend using a rust-oleum type of paint to cover those scratches. That will help with any corrosion as time goes on. I have a link for your reference below.
Helpful Links
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.














Galen
10/4/2026
Ive been using the hitch for a year. Im very happy with how easy it is to adjust, and how well it is built.