Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re swapping between trailers of different heights, keeping things level makes all the difference in stability and braking. This Blue Ox adjustable ball mount gives you a full 3-3/4" drop or 3-3/4" rise so you can dial in the perfect setup for each trailer. The adjustable platform moves in 1" increments, making height changes quick and precise for smooth, even towing every time.
Whether it’s a camper, boat, or equipment trailer, you can count on this mount to handle serious weight. It’s rated for 8,000 lbs when using the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Pair that with a 1,000-lb tongue weight rating and heavy-duty steel construction, and you’ve got a hitch setup that stays strong under load.
If you pull different trailers week to week, switching between ball sizes is a breeze. The built-in hitch balls—2" and 2-5/16"—cover the most common coupler types. Just pull the pin, rotate the ball assembly, and reinsert the pin to change sizes. No tools needed and no loose parts rolling around in the toolbox.
Towing shouldn’t mean constant clunking from the hitch. The anti-rattle shank helps keep noise and play to a minimum so your setup feels solid on the road. It’s one of those small touches that makes long hauls quieter and less stressful.
Road grime, salt spray, and rain can eat through lesser finishes fast. This mount’s black powder coat protects the steel shank while the zinc coating on the hitch balls helps resist corrosion over time. It stays looking clean and ready to tow season after season without extra fuss.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, it's Evangeline here at Etrailer, and today we'll be taking a look at the Blue Ox two ball adjustable ball mount. This is going to be for your two inch hitches, and it has a maximum towing capacity of 10,000 pounds. So this is gonna be a small, compact, but still adjustable, ball mount. So that's ideal. If you don't need that much of a range you just wanna switch between the different balls, or get a rise and a drop quickly and easily. It has a two inch hitch ball.
This one can tow up to 8,000 pounds. And then for your capacity with a two and 5/16, that bumps up to 10,000 pounds of towing capacity. This gives you some different heights, and you do have increments of an inch in between. So there's 1, 2, 3, 4 holes. So if you need to switch around the balls or you need to get a different height adjustment, you just take out that pin and clip, move this up, or move this down, or even flip this right around to the two inch ball, and then pop that pin right back in, and clip it into place.
So you have this black powder coat finish on the ball mount and that can help prevent corrosion. But then you also have this zinc coating on the ball. So ideally you wanna have a level connection between your ball mounts and your trailer coupler. So that means you may need a different rise or drop, depending on that situation. So for rise and drop, we like to measure from the inside edge of your hitch receivers.
So right there. And then if you need a rise, or a drop, you can adjust your ball mounts appropriately. So just like how you flipped the hitch balls around, you can flip the ball mounts around. So you do have a five eighth pin and a clip. The hitch does not lock with the included tools.
So I do recommend getting the etrailer locking hitch pin, if you wanna upgrade that. Now we just flipped that right around. Line up the hitch pin holes right there, pop that pin right back in, put the clip on and just like that, you converted this from a drop to the rise position. The maximum rise is gonna be three and three quarter inches. The maximum drop is going to be three and three quarter inches. So that short range is ideal if you don't need as much range and you just want a smaller or more compact but still adjustable ball mount. Now Blue Ox has adjustable ball mounts that give you more of a range, if needed, so take those measurements and double check before you get one for you. Yeah, this heavy duty steel construction throughout the ball mount and you have this anti rattle design, so notice how well it fits into that channel. That's to reduce the rattle. There will still be a little bit of movement though, mainly because of your pin and clip. Also, we do have a two and a half inch reducer, so it's nice to know that that pin and clip still fit no matter what hitch size you have. So for a ball mount that is still compact that gives you a little bit of adjust stability. This works out great. Now a similar option you might find here at etrailer is the curt two ball adjustable ball mount. They are similar when it comes to design, as well as the price point. They also have the zinc coating and the two different ball sizes. One small difference is gonna be the range of height when it comes to rise as well as the drop. So that is something worth considering. Again, just double check how much rise and drop you need for your different towing situations. So check out our pictures, videos, and descriptions here at etrailer.com to find the right fit for you. This was a look at the Blue Ox two ball adjustable ball mount with a 10,000 pound capacity right here etrailer.com.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews

Jenny N.
8/15/2022
I reached out to Blue Ox and confirmed that it is made in the USA. If you have found any conflicting information please let me know.

Rj
1/23/2024
ITS BEEN BULLETPROOF

Barry K.
11/1/2023
GREAT HITCH

Brooke M.
11/30/2022
It looks like your experience with the product or with shopping at etrailer could have gone better. If you would like to add any comments to your review, I would be happy to assist you.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Kate F.
3/25/2026
Thanks for including the pictures Rob! What body of water do you mainly get out on on your boat? That is an AWESOME Bug!