See what our Experts say about this Tow Ready Trailer Hitch Ball

• Ways to Prevent Rust on Interchangeable Hitch Ball Sets
  Yes, I am sure that there are many people out there with your similar concerns. Since an interchangeable hitch ball set like part # 63803 has the quick-release mechanism on the top of the ball, it is very possible for water to get in here. In an effort to prevent this, we recommend doing just as you said, keep things greased with a light weight oil and stored when not in use. As for using a cover, the good news about a cover is that it will prevent the ball from direct contact with the...
  view full answer...
• Trailer Hitch Recommendation for 1996 Cadillac Fleetwood Hearse with 38 Inch Frame
  While a custom fit hitch for your 1996 Cadillac Fleetwood Hearse is not an option, the Multi-Fit Trailer Hitch # 5350 may work for you. The hitch is adjustable to fit vehicle frames from 24 to 46 inches wide, has a capacity of 5,000 lbs and features the 2 inch receiver you wanted. It requires no welding and all hardware to install it is included. Since your frame is recessed a good 16 inches behind the vehicle's fascia, your best option is to go with an extra long ball mount like # EA40...
  view full answer...
• Will Tow Ready Interchangeable Hitch Ball be Safe to Use
  I totally understand your concern but the Tow Ready Interchangeable Hitch Ball Set # 63803 is totally safe to use and would not come disconnected when either towing or not towing. I attached a review video for this for more info as well.
  view full answer...
• Torque Spec for Nut On Tow Ready Interchangeable Hitch Ball Set Part 63803
  The torque specifications for the nut on a hitch ball will be based on the diameter of the shank. The Tow Ready Interchangeable Hitch Ball Set part # 63803 has a 1" diameter shank so the recommended torque specification for the nut is 250 ft. lbs. That said, I understand you are not likely to have a torque wrench capable of this just laying around. Although I must recommend that you follow the guidelines laid out by the manufacturer in regards to torque specifications, I can tell you that...
  view full answer...
• Replacement Interchangeable Hitch Ball Set with 1-7/8 inch, 2 inch, and 2-5/16 inch Hitch Balls
  We have a few different interchangeable hitch ball sets that fit the description that you gave of have a 1-7/8 inch, 2 inch, and 2-5/16 inch hitch balls and they are: Tow Ready Interchangeable Hitch Ball Set - # 63803 Convert-A-Ball Interchangeable Ball Set - # 105TB The Tow Ready and Convert-A-Ball sets have 1 inch shanks while the Fastway and Diversi-Tech option fits to their specific ball mounts, like part # DTSTBM6400.
  view full answer...
• Can Rust on Hitches, Ball Mounts and Hitch Balls Like Tow Ready # 63803 be Prevented
  Rust is not covered by the warranty on Tow Ready # 63803. However, there are some steps you can take to slow the process of rust forming. Hitches, ball mounts and hitch balls will always be exposed to abrasive road grit/sand, corrosive salts in cold climates and general dings from road debris, no matter what you do. On a powder-coated steel hitch, for example, you can do your best to keep the hitch clean (to remove salts) and to touch up with anti-corrosive paint any spots that might have...
  view full answer...
• Hitch Ball with Interchangeable Ball Sizes to Match Coupler Sizes
  It sounds like you are interested in the Convert-A-Ball Interchangeable Ball Set # 900B. This kit allows you to simply move a metal shank from the side of the ball to exchange hitch ball sizes. I've attached a few videos to assist and there are instructions on the product page to further assist. Another option is the Tow Ready Interchangeable Hitch Ball Set with 1-7/8", 2" and 2-5/16" Hitch Balls # 63803 which interchange using a pin on top. The 2 inch hitch balls are not available...
  view full answer...
• Recommended Interchangeable Ball Set Made In USA
  The Tow Ready brand that manufactures the Tow Ready Interchangeable Hitch Ball Set with 1-7/8", 2" and 2-5/16" Hitch Balls part # 63803 is made in China. If you prefer a USA made option, I recommend Convert-A-Ball Interchangeable Ball Set part # 900b which has a -7/8", 2" and 2-5/16" interchangeable ball with a 1" shank. The Convert-A-Ball set is nickel plated. I have attached an installation video for your reference.
  view full answer...
• What is the Weight Capacity For Each Hitch Ball In The Tow Ready Interchangeable Ball Set 63803?
  I reached out to Tow Ready and they were unable to provide me with any specs for the individual hitch balls on the Interchangeable Hitch Ball Set # 63803. While I thought this is quite strange I am not surprised and it likely has the same ratings as the TowSmart Hitch Ball Set # 3481256. The 1-7/8" ball is rated up to 3,500lbs, the 2" ball is rated up to 6,000lbs and the 2-5/16" ball is rated up to 8,000lbs. This information is printed right on the balls themselves so there is no confusion...
  view full answer...
• How Long is the Shank on the Tow Ready Interchangeable Hitch Ball Set # 63803
  The shank length on the Tow Ready Interchangeable Hitch Ball Set # 63803 is 2-3/8 inches. I have linked a video review of this ball set for you.
  view full answer...
• Availability of a 50MM Trailer Hitch Ball to be Used to Tow European Gilder Trailers
  After researching with Tow Ready, I found out that they do not have a 50mm ball option for the Tow Ready Interchangeable Hitch Ball Set, like # 63803. However, I have a solution for you. The Brophy 50MM Hitch Ball, # EH53C-C, can either be installed in your current ball mount or you may want to purchase a second ball mount to mount the 50MM ball. The ball has a shank that measures 1 inch in diameter and 2-1/8 inches long. This will allow you to switch ball mounts in and out with out...
  view full answer...
• Recommended Multi-Ball Hitch Ball Kit for Use in 1988 Dodge Ram Pickup
  We do offer interchangeable hitch ball kits that you can see on the linked page. You will want to measure the diameter of the ball hole in the bumper and select a ball with the matching shank diameter. You'll also want to choose one with a shank length that suits the thickness of the bumper material. The ball sets shown have either 3/4-inch or 1-inch diameter shanks and shank lengths from 2-1/4- to 3-inches. Just click on the filters on the page to select the features you need. If you...
  view full answer...

Do you have a question about this Trailer Hitch Ball?