Valterra Cable with Valve Handle - 72"
(24 reviews)
Price: $33.45
In Stock
Valterra Cable with Valve Handle - 72"
Item # TC72PB
Retail:$44.24
Our Price: $33.45
You Save: 24%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (24)
- Q & A (14)
- Photos
- Why etrailer?
Valterra Accessories and Parts - TC72PB
- RV Sewer
- Waste Valve Parts
- Cable Kits
- Valterra
- 72 Inch Long
72" Flexible cable lets you install valve handle where you want it. Inner wires are constructed of stainless steel. Works with Valterra and Bladex cable valves.
Features:
- 72" Flexible cable lets you install valve handle where you want it
- Cable allows handle to be placed in secure location or easy-to-reach place
- Inner wires are constructed of stainless steel
- Works with Valterra and Bladex cable valves
- 1-Year warranty
TC72PB Valterra Cable with Valve Handle - 72"
Customer Reviews
Valterra Cable with Valve Handle - 72" - TC72PB
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
72" Flexible cable lets you install valve handle where you want it. Inner wires are constructed of stainless steel. Works with Valterra and Bladex cable valves.
- TC72PB
by: William09/05/2018
The cables purchased from etrailer are of much better quality than the original factory cables, the factory cable mounting ends were plastic, and did not hold up at all; The Valterra Cable TC72PB has metal mounting ends. We were able to remount the cables to a location inside of the large cabinet on the left side, which makes it so much more convenient to open and close the Gray & Black tanks, (No getting more down on the ground to open & close the valves). I have enclosed a photo of the completed installation.
- TC72PB
by: Derek11/25/2018
This product has been good, I only gave it 3 out of 5 stars due to the fact that I am going to have to replace this cable. Maybe a design flaw on the RV Manufacture end or bad cable. The outer shield and how the cable locks into the valve block no longer stays in place so the valve does not work again. The cable itself is strong, the handle design is of good quality. It was easy to trim to size, I would buy again.
- TC72PB
by: Marty02/19/2021
Works great
- TC72PB
by: dell.m08/06/2019
valterra cable with valve handle after in got it on it work real great
- TC72PB
by: Larry C01/02/2018
Have not had the opportunity to install items. My long association with etrailer and their products gives me complete confidence that I will not be disappointed. Outstanding service.
- TC72PB
John - 05/14/2020
by: John05/13/2019
Quick delivery and a great price.
Comments
Installed on 2011 LTV Serenity Gray tank. Has 180 degree turn which creates a good amount of friction on the cable and it very hard to pull or push back in using the service area T handle. But it does work. Can now see why the original cable outer housing wore out so quickly at 28,000 miles.
John - 05/14/2020
- TC72PB
by: Edward03/28/2020
Great transaction, web page desc was correct and helpful, very competitive price, articles arrived as specified and are exactly what I needed for repairs. Thank you etrailer !!
- TC72PB
by: Michael09/09/2018
Used to replace a different brand cable. Solid core cable performs much better than the competitor's stranded cable. Great product, good price, excellent supplier.
- TC72PB
by: oldpoop6910/25/2020
the cable worked as it was supposed too
- TC72PB
by: Louise06/17/2020
Perfect replacement for my broken cable!
- TC72PB
by: Rex05/02/2018
Great product, had standard shipping ups delivered to our post office who delivered to our door, seems ups could have finished delivery and had a two day less delay.....
- TC72PB
by: Stan09/12/2019
No longer owning trailer but Did the job
- TC72PB
by: TC72PB06/20/2017
All is good! We received the part and installed it last weekend and works great. Thanks for the great and swift service!
- TC72PB
by: Derek01/10/2018
These are nice replacement, not sure about the durability. They are a single cable instead of stranded like my previous. Easy to cut to length.
- TC72PB
by: Joe04/03/2017
the service and customer satisfaction were excellent. the product arrived within 3 days of my order date and was packaged very well. it fit just like it was supposed to and it came with a detailed installation sheet.
- TC72PB
by: Steve10/14/2017
Replaced all three cables on my Laredo work great. Just needed some modification on one cable but all went together. Have sold unit since then so can't say beyond four months of operation
- TC72PB
by: Stan04/12/2017
Good price . just what it said it was going to be . Shipped fast ?? Now I'm ready to camp ????????
- TC72PB
by: MGB10/05/2017
This came in in time and works just as it says. I would recommend.
- TC72PB
by: Jean-paul03/09/2020
Excellent product and service .Great company to deal with
- TC72PB
by: Jack06/17/2021
- TC72PB
by: Randie A08/07/2016
The part came in good time is the correct part fixed the RV all is good ??????
- TC72PB
by: Randy04/29/2017
Very speedy delivery and received exactly what we ordered. Thank you. Will use this company again!
- TC72PB
by: Denis06/13/2021
- TC72PB
by: Gregory12/17/2020
24
24
Ask the Experts about this Valterra Accessories and Parts
- Replacement RV Waste Valve Cable KitI have a solution for you, but there is not a cable only available to attach to an existing handle for an RV waste valve that is cable actuated. You would instead need to replace the entire cable and handle with something like the Valterra Cable with Valve Handle # TC72PB. This assembly has a 72" long cable and is compatible with Valterra or Bladex cable actuated waste valves. If you need a different length cable, I've gone ahead and linked the available kits we have that you can use to...
view full answer... - Can 72" Valterra Cable with Valve Handle be Trimmed to 48"You most certainly can trim the 72" Valterra Cable with Valve Handle # TC72PB to accommodate your application! The black part is just a protective sheath to help keep the cable in good shape.
view full answer... - How to Install the Valterra Cable with Valve Handle # TC72PBTo install the Valterra Cable with Valve Handle # TC72PB you will need to simply follow the instructions that are included in the packaging: Remove the locknut from the cable housing assembly. Feed the cable through the mounting bracket or hold in the wall of chassis. Feed the locknut back over the cable and fasten securely to the backside of the bracket or wall. With the red tab in place, insert the cable housing into the collar entry hole and the wire into the coupler. Tighten allen...
view full answer... - Could Valterra Replacement Waste Valve Cable Fit 1999 Avion Westport 5th WheelValterra and Bladex are too very popular waste valve brands which the Valterra Cable with Valve Handle # TC72PB that you referenced is designed to fit. Most likely that's what you have but you'd want to first check the waste valve to see if you can get a brand off of it.
view full answer... - Can Valterra Replacement Cable be Used with Lasalle Bristol RV Waste ValveI don't see why a replacement Valterra Cable like part # TC72PB wouldn't work as a replacement for your Lasalle Bristol valve but officially it hasn't been tested so we can't say with total certainty. We've asked Valterra this in the past and this is what they told us.
view full answer... - Replacing Valve Cable on LaSalle Bristol RV Waste Valve # 34466N11AB96GMARemove the locknut from the cable housing assembly of the # 34466N11AB96GMA. Feed the cable through the mounting bracket or hold in the wall of chassis. Feed the locknut back over the cable and fasten securely to the backside of the bracket or wall. With the red tab in place, insert the cable housing into the collar entry hole and the wire into the coupler. Tighten allen set screw in the coupler and collar screws in the collar. Secure the cable every 18" to 24" using a zip tie or paperclip....
view full answer... - Waste Valve Will Not Open With Cable PullThe cable is normally attached to the valve using a set screw inside the housing. You would want to pry the housing open and see if the cable has come unhooked if you have the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank part # 34466N11AB60GM. There is not replacement cable available for the Lasalle Bristol so you would most likely need to replace the whole unit. If you have the Valterra brand like part # TC172 you can replace the cable with part # TC72PB.
view full answer... - Replacement Cable & Handle for LaSalle Bristol Waste ValveI reached out to my contact at LaSalle Bristol regarding the LaSalle Bristol # 34466N4BB72GM waste valve that you referenced and they said that they do not have just a replacement cable for that item. However, I think that you could use the Valterra # TC72PB cable for this.
view full answer... - Replacement 1-1/2 Inch Hub and Valve for Valterra T80 Double RV Waste Valve ElbowThe Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # T80 will use the Valterra RV Sewer Spigot with Flange - 1-1/2" # T1005-1 to match the original hub. This secures to your pipe with solvent # A05-0303. The Valterra RV Sewer hub # T1006-1 will also fit but is designed to fit differently than the T80 original connection so it can be a replacement part as well. I've attached a video to help with the dimensions and a couple photos to further assist with dimensions...
view full answer...![Image 1 for]()
![Image 2 for]()
- Replacement Drain Valve For A Grey RV Water TankThe standard size of a water drain valve for grey tanks on most RV's is 1-1/2". For this 1-1/2" drain valve, I have three options for you to consider. The first option is the Valterra Waste Valve for RV Gray Water Tank part # T1001PBC. This valve does not include the pull handle. You will need the Valterra Cable with Valve Handle part # TC72PB in order to operate this valve. The next option with a plastic pull handle included is our Valterra RV Waste Valve part # T1001B. The last option...
view full answer... - Can the Valterra Bladex Valve Handle With Cable Extension be Used With the Bladex Waste Valve # T50The Valterra Bladex Waste Valve for RV Black Water Tank # T50 that you referenced has a handle that is attached to a tube, and the Valterra Cable with Valve Handle # TC72PB uses a cable for the extension so they are not compatible. To add an extension cable to the part # T50 you will need a whole valve body kit. You can find this part on our site listed as part # TC372. I confirmed this with my contact at Valterra.
view full answer... - Is Cable By Itself Available For Cable-Actuated RV Waste Valve The cable by itself is not something that can be purchased separately of the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank - Spigot to Hub - 72" Cable # 34466N11AB72GMA. And while we do not carry LaSalle Bristol waste valve cables, we do carry Valterra, which are compatible with Valterra and Bladex cable valves. There are three Valterra cable sizes available: Valterra Cable with Valve Handle - 72" # TC72PB, Valterra Cable with Valve Handle - 96" # TC96PB, Valterra...
view full answer... - Replacement Cable and Valve Handle Options for a 2015 Open Range 316 5th WheelIf you have a Valterra waste valve on your 2015 Open Range 316 then it should have a set screw to secure the cable that runs to the handle. I have never inspected the OEM waste valves on a trailer before but I would be surprised if there were no set screw. Should you find that you don't have one the worst case scenario would be to replace the whole waste valve with a Valterra replacement like part # TC172 that you referenced. When it comes to the length that is totally up to you. If...
view full answer... - Will Valterra Cable Work on a Bristol Dump ValveI spoke with my contact at Valterra who said that the Valterra Waste Valve Body # TC372 would be able to replace the Bristol Valve body that you currently have installed but that they haven't tested their cable kits like part # TC72PB with Bristol Valve so she wouldn't be able to confirm whether or not it would fit.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Written by:
Amy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.