Replacement 1-1/2 Inch Hub and Valve for Valterra T80 Double RV Waste Valve Elbow
Updated 04/15/2019 | Published 04/12/2019 >
Products Featured in This Question
Question:
Which replacement hub for the 1.5inch side is correct? T1006 or T1005? I havent had any luck finding the dimension on the T80 for comparison. Thank you!
asked by: Todd H
Expert Reply:
The Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # T80 will use the Valterra RV Sewer Spigot with Flange - 1-1/2" # T1005-1 to match the original hub. This secures to your pipe with solvent # A05-0303. The Valterra RV Sewer hub # T1006-1 will also fit but is designed to fit differently than the T80 original connection so it can be a replacement part as well. I've attached a video to help with the dimensions and a couple photos to further assist with dimensions of the other products.
If you need the replacement valve body use # T1001VPM for the replacement or if you want a cable with handle use # T1001PBC along with # TC72PB.
Product Page this Question was Asked From
Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug
- RV Waste Valve
- Sewer Elbow
- Double Waste Valve
- 1-1/2 Inch Valve Body
- 3 Inch Valve Body
- Manual
- 1-1/2 Inch Hub
- 3 Inch Hub
- Rotating Valve
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: lasalle bristol rv waste valve
- Search Results: sewer wye
- Search Results: rv waste valve
- Search Results: lasalle bristol rv sewer hose fittings
- Search Results: rv sewer hose fittings
- Shop: Valterra "Y" Coupling for RV Sewer Hose - 3" Diameter
- Shop: LaSalle Bristol RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot
- Q&A: RV Sewer Hub with Flange with 3-3/4inches Between Mounting Holes
- Q&A: Dimensions Of Valterra Double Rotating Waste Valve # T80
- Video: An In-Depth Look at the Valterra RV Sewer Slip Hub with Flange
- Video: In-Depth Review of the Valterra "Y" Coupling for RV Sewer Hose
- Video: DIY Install: Double RV Waste Valves on your 2011 Coachmen Freelander Motorhome
- Video: In-Depth Review of the Valterra RV Sewer Termination Adapter
- Video: What to Know About the Double RV Waste Valves-T80
- Shop: Valterra RV Sewer Slip Hub with Flange - 1-1/2"
- Shop: Valterra RV Sewer Termination Adapter - 3" Lug Fitting to 3" Hub
- Shop: Valterra Clearview Extension for RV Waste Valve - 3" Bayonet Fitting - Clear Plastic - 5"
- Shop: Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub
- Shop: LaSalle Bristol RV Sewer Slip Hub with Flange - 3"
- Q&A: Double Waste Valve with 3 inch and 1-1/2 inch Hub Fittings On Both Ends
- Q&A: Replacement Double RV Waste Valve For a 2015 Nucamp 320s Camper
- Video: LaSalle Bristol RV Waste Valves Review
- Video: A Closer Look at the Valterra Elbow DWV Fitting for RV Sewer System
- Search Results: grey tank handle
- Search Results: gray tank handle
- Q&A: Do You Carry a Valterra Waste Valve for RV Gray Water Tank - 1-1/2 Diameter - Spigot Screw on Cap?
- Q&A: What Flange Fits Valterra Street DWV Fitting # D50-2880
- Q&A: How Do I Adapt a 1-1/2" Gray Water Valve to a 3" Bayonet Sewer Connection?
- Shop: Trailer Hitch
- Shop: Trailer Wiring





