Replacement Cable for a Valterra Waste Valve for RV Gray Water Tank
Updated 06/18/2025 | Published 06/12/2025
Products Featured in This Question
Question:
Does the cable bracket come off the old valve. Mine looks like tc372 but Im not sure if the cable sheath clamp bracket is used with the new valve.
asked by: Jim
0
Expert Reply:
I'm not sure Jim because I have no idea what valve you have. Have you tried taking the cable off of it? If nothing else you should be able to cut the cable and then reuse it. It'll just be a bit shorter.
We do sell a cable for the Valterra Waste Valve for RV Gray Water Tank item # T1001PBC. It's the Valterra Cable with Valve Handle - 72" item # TC72PB.
What kind of trailer do you have?
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter
- RV Waste Valves
- Straight Valve
- Single Waste Valve
- 1-1/2 Inch Valve Body
- Manual
- 1-1/2 Inch Spigot
- Stationary Valve
- Valterra
more information >
Continue Researching
- Q&A: Difference Between Valterra T1003VP and T1003VPM Waste Valves
- Q&A: Comparing Valterra And LaSalle Bristol Cable Actuated Gate Valves
- Q&A: How Much Does The MORryde Cushioned 5th Wheel Pin Box MR84VR Weigh?
- Q&A: Replacement Black Waste Water Valve for 2017 Winnebago Micro Minnie
- Q&A: Replacement 3 Inch RV Waste Valve Alternative For Black Water Tank
- Q&A: Comparing LaSalle Bristol Cable-Actuated RV Waste Valves
- Q&A: 1-1/2 inch Gray Tank to 3 inch Bayonet Fitting Adapter Recommendation
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: How to Raise Your Travel Trailer Height
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
Jim
6/17/2025
I have a Grand Design 5th wheel. I think that it has a valterra valve ( at least it has a valterra handle in the wet compartment) . But the valve leaks and I'd like to replace it. I wasn't sure if I needed the cable and everything I think it's just the valve or seals. I figured that while I have it apart I might as well replace the valve. I just wasn't sure if the old part where the cable sheath attached would work with the new valve. I'm pretty sure the old valve has the bracket on it to clamp the end of the sheath so it doesn't move.