Availability of Extra Tekonsha Brake Controller Installation Harness for Second Vehicle
Updated 05/19/2015 | Published 05/17/2015
Products Featured in This Question
Question:
I have the prodigy p2 brake controller your part number 90885. Is it possible just to get the wiring harness for this. The reason for this is I have it installed on another vehicle and would like to be able to switch it to another vehicle without un wiring it. Thank you for your time
asked by: John
Expert Reply:
If you need just an extra 4-wire pigtail harness for your Prodigy P2 Brake Controller # 90885 to enable it to be swapped back and forth between the two vehicles, you can use part # 20127. This type of pigtail harness allows hardwired installation in just about any vehicle.
You'll also was either a new mounting bracket # P7685 or a pocket mount # 7686.
Some trucks and other vehicles have a quick-connect port under the dash (or behind a kick panel) to allow the P2 to just plug in without having to splice any wires. These harnesses are vehicle-specific so feel free to let me know the year/make/model/version of the vehicles and I will be glad to check for availability of a harness that fits a Ford F-150.
